How to inspect and fill engine coolant in a Suzuki king quad! quick and easy DIY.

Hey everyone! Please like and subscribe! Today, I'll show you how to inspect and fill the engine coolant on your Suzuki King Quad 750. Proper coolant levels are crucial for keeping your ATV running smoothly, especially during hot weather or heavy use.
First, locate the coolant reservoir on your King Quad 750.
1. Inspecting Coolant Levels:
Make sure your ATV is on a flat surface and the engine is cool.
Check the coolant level in the reservoir. There are markings indicating Low and Full levels. The coolant should be between these marks. If it's low, you'll need to add more.
2. Adding Coolant:
Lift the hatch located on the centre of the hood and pull the cap of the coolant reservoir carefully. Again, ensure the engine is cool to avoid burns.
Add the appropriate coolant mixture recommended for your Suzuki King Quad 750. Usually, this is a 50/50 mix of coolant and distilled water. Pour it slowly to avoid spills.
3. Checking for Leaks:
After filling, securely close the reservoir cap.
Start the ATV and let it idle for a few minutes.
Check around the reservoir and hoses for any signs of leaks. Address any leaks immediately to prevent overheating.
4. Final Inspection:
Once everything looks good, turn off the engine and double-check the coolant level. Adjust if necessary to ensure it's within the recommended range.
That's it! You've successfully inspected and filled the engine coolant on your Suzuki King Quad 750. Remember, regular coolant maintenance helps extend the life of your ATV's engine and ensures reliable performance. If you found this video helpful, don't forget to like, comment, and subscribe for more ATV maintenance tips. Thanks for watching!
ECSTAR COOLANT 50-50 PREMIX
SKU: W90A0-02E10-01Q