How to Install 2007-2013 GMC Sierra Headlight LEDs | Diode Dynamics

[@KrazyKajun602]

Thank you. I was able to replace mine by just poping off the driver's side trim and move it enough to remove the light fixture.

[@KwameAlbert]

I didn't have to remove the middle whole trim.

[@L0NERANGR]

I had too and that was the longest part imo

[@paulmahon1613]

Yeah it's not necessary once you Yank it away from the corner of the fender and all you have to do is push down on it and that gives you a straight shot to that bolt

[@pootthatbak2578]

If i have already managed to change out the halogen h11 lamps several times without dismantling anything, why would i dismantle the upper shroud and remove the lamp assy?

[@diodedynamics]

This is a general guide for those who have not installed these lights before. If you have a better way for installation, you are more than welcome to use that method!

[@coryturley1878]

​@diodedynamics there is not a better way. Beside just pull only the side you are replacing and instead of the whole piece off.

[@MadGnomie]

Why would you make it so that the connectors could be installed backwards?

[@diodedynamics]

Hey there! This is the plug design from OEM manufacturers. We simply make the connector that fits. Thanks for checking them out.

[@fluiddynamicz2262]

Just started on my 2009 truck doing some mods but that bottom trim piece beneath the grill will not come off anyone got tips?

[@diodedynamics]

Feel free to give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@paulmahon1613]

You just have to pull the corner part of it out you don't have to pull the whole thing.it. It doesn't come out super easy but it will come out and it wont break

[@neomacchio4692]

Just pull the area around the light and bend it out of the way

[@coryturley1878]

​@@paulmahon1613Totally correct

[@kingmathias23]

Do you have the led bulb placement in an up and down position or sideways position? 2012 Sierra.

[@diodedynamics]

It's in a side-to-side position. This way, the light bounces evenly off of the reflectors., much like the stock bulb.

[@russpeaknuckel9525]

​@diodedynamics Yes,supposed to be 3 and 9 o'clock. But my Sylvania only go in 12 and 6 ..?

[@CristianVenegas-n5w]

Where can I get that same headlight for my truck same one *?????

[@diodedynamics]

Here is the link for you: www.diodedynamics.com/low-beam-led-headlight-for-2007-2013-gmc-sierra-1500-pair.html

[@cruzdeleon1888]

So the turn signals will be clear white once turn signal is activated? If so how will people know you're turning left or right ?? 🤔🤔 shouldn't they turn yellow/amber once activated?

[@diodedynamics]

I'm sure there is a miscommunication here. This video is only showing how to install and replace your Low Beams in your headlight, which are not used for turn signals. The turn signal bulbs are still amber for signaling either left or right. Thanks for watching!

[@JosephNnbs]

For anyone watching this is a great time to upgrade to a different style housing if desired as well as install load resistors, if you want to swap only bulbs all you do is reach behind the kight to swap highs and lows. If you can contort your wrists and small hand the turn signals out too do it.

[@coryturley1878]

No way you can do that on passager side.

[@JosephNnbs]

@@coryturley1878 I did it to all my lights on my truck back in 2017. Still running no issues

[@sambulucci]

low beam is H11 what about high beam? is it 9005 or 9012 ?

[@diodedynamics]

Hi Sam! The high beam is size 9005. Unfortunately, our SL1 will not fit inside the housing in this location.

[@steveharvey7712]

After all that, I'd replace all the bulbs whether they needed it or not.

[@diodedynamics]

Might as well, while you're in there! 🤘💪

[@uscgrl484]

That's the hard way of doing it

[@eminiscalperpro9729]

You do not have to remove that trim pile

[@diodedynamics]

Thanks for the input!

[@chillicobra]

Do you offer a high beam ?

[@diodedynamics]

For these particular model trucks, we do not. This is one of the rare cases where there is a fitment issue for the high beam, which is why you do not see a listing.

[@chillicobra]

@@diodedynamics How close would your low beams match Moriomoto hi ?

[@diodedynamics]

@@chillicobra, ours are rated at a 5700K white color. We would recommend checking what the color temperature is on the other bulb.

[@angelgabriel2326]

que medidas de foco le puso a su camioneta ?

[@thadtoney4352]

He made thst look easy..😅

[@yfzguru]

U guys hauled out the headlight for no Reason just remove the battery a lot easier

[@sambulucci]

what about the other side?

[@HI-RISER]

@@sambulucci Probably a little late, I just popped out the air box. No body panel removal necessary. Way easier than what this guy is doing.

[@paulmahon1613]

I have to look at mine again but my battery is on the right side up by the firewall.