Am I the only one that is in love with the front of this bike?
@TwoGunz20086 жыл бұрын
Benjamin Samuel I love it to :D
@cbrrr7866 жыл бұрын
Mee too!
@sophearunem31772 жыл бұрын
I just got my front signal lights💡 changed on my cbr600rr. I was capable to change them so easy by watching your videos 👍👍👍👍. Every helpful
@TSTindustries2 жыл бұрын
Glad we could help!
@adamstratford674010 жыл бұрын
another great product and video from the tst boys keep up the great work
@TSTindustries10 жыл бұрын
Thanks Adam! We appreciate it!
@johnnypham19748 жыл бұрын
Just installed these bad boys and the tst relay.
@TSTindustries8 жыл бұрын
+johnny pham Awesome to hear! We hope our video was helpful.
@the8jrfan9 жыл бұрын
Bought some on your Amazon store, I have the red version of this bike obviously
@TSTindustries9 жыл бұрын
the8jrfan It will look really nice on your bike, and by using this video the install should be a breeze.
@kadirusta21127 жыл бұрын
i wonder only this.must i removing seid doors ?
@Keggarz Жыл бұрын
Thanks for the help!
@TSTindustries Жыл бұрын
Happy to help!
@TattdDreamzMusic8 жыл бұрын
will this fit the 2016 properly cuz the 2016 panel is different and more deep than the example ur showing
@TSTindustries8 жыл бұрын
The 2016 panel is exactly the same as 2013+. See time stamp 2:31. You will notice that the signal well on these fairings is very deep. Our signals are designed to fit perfectly in hat well.
@NDB-AK9 жыл бұрын
Do you need to buy the flasher relay you guy make to slow down the blink speed or will it blink normally?
@TSTindustries9 жыл бұрын
Nicholas Bachman We highly recommend purchasing our plug-and-play relay to slow your flash rate down.
@corey-jadeclarke-brown693411 ай бұрын
Will these work for an EU 2013+ CBR600RR? Or will a pin adaptor be necessary?
@TSTindustries11 ай бұрын
Im working from memory here so you have to help me out with some info. Does your bike have drl function in the signal lamps? I believe that in EU there is no running light function in signal lamps on this bike. In that case you have a two conductor connector for the signals and that will clash with our lamp's three position connector. If this is the case the installation will not be plug and play. You will need to remove the pins from your current lamp's connector and reuse that plug with our lights. This will only get you signal function but no running light. If you want running light you will have to run the wire unused in the plug to a switched/fused 12v source.
@mmcguireiphone6 жыл бұрын
Mine broke during our winter where temperature dropped to minus 6 c. Unfortunately I live in Scotland and I can expect low temps annually. Going to fit yoshimura ones this week. Much better looking quality. Tst screw goes into main plastic housing. Let's water seepage in. And that froze , expanding to break the plastic. Poor design IMO. Needs a rubber or seal.
@switchtx84688 жыл бұрын
Would this work with a '13 CBR 500r? The styling and turn signal look almost identical. My assumption is that you would just need a 3-2 adapter. Even the seating of the light in the fairing looks the same.
@benjaminsamuel72978 жыл бұрын
And besides the 13 - present bikes look far more futuristic
@christopherjohnson76642 жыл бұрын
Will this kill the battery since the light always stays on?
@TSTindustries2 жыл бұрын
Not at all. Your stock lights are always on as well and there is no issue there. Being that these are LEDs, they are drawing a fraction of power compared to the stock lights.
@kadirusta21129 жыл бұрын
realy very nice wiedo.thanks the tst
@mahrahsan18276 жыл бұрын
Hello there Iam facing issue during opening faring of my cbr 600 2014 am changing engine oil first time please make a vedio on oil change and filter and how to open complet faring thanks
@TSTindustries6 жыл бұрын
I wish I could help you but we are scheduled out through early October with all the time we have for video.
@mahrahsan18276 жыл бұрын
no problem brother . thanks for reply . but if you get some extra time in future plz make a video on how to remove faring because I search for it but did not get any video .
@hee38009 жыл бұрын
Very cool, can you make the light permanently orange or does it have to blue and orange for right/left turn signal? thanks!
@TSTindustries9 жыл бұрын
Hee 3 the blue light is just the running light so yes we can get rid of that wire for you.
@hee38009 жыл бұрын
Yes, I would like to order pure orange flushmount, inte grated taillight, and Fen Eliminator. How can I order the flushmount to be pure orange?
@TSTindustries9 жыл бұрын
We do offer a flushmount that has an orange halo glow along with the Orange/Amber turn signals. You can purchase directly off of our website. If you go to our sales ad for the integrated tail light and add in the relay g2, plate bracket, and license plate light it comes out to roughly $120. You can then add in the Halo turn signals and for under $200 you can have it all. Hee 3
@AkinaMic10 жыл бұрын
Very nice!
@spencerelwell59533 жыл бұрын
What should i do if the rivet fasteners are striped out?
@TSTindustries3 жыл бұрын
replace with new ones
@Addy29plus57 жыл бұрын
Don't mean to come across as a party pooper but isn't the point of turn signals that they can be seen by other road users, not hidden
@TSTindustries7 жыл бұрын
These Halo-1 signals were designed to provide superior brightness for signaling, but with a sleeker profile. Yes, you do lose a little visibility from the front when compared to the OEM, however, the three 1W amber LED chips will make up for any brightness lost. In addition to the brighter LED chips, we designed the lens and the circuit board to face somewhat at a forward angle to provide ample lighting when viewed from the sides of your bike but the front as well. Our signals are a very popular choice for aesthetic reasons which is why they are designed this way. We always try to balance safety with cosmetic appeal.
@kadirusta21127 жыл бұрын
can you a make wıdeo cbr 600 rr 2015 years how can change aır fıltre?
@TSTindustries7 жыл бұрын
Maybe we can show the installation of the BMS filter we sell for that bike once we have one of those motorcycles back in the shop.
@whereis1862 жыл бұрын
Does this work with a 2021 cbr?
@TSTindustries2 жыл бұрын
Yes sir. I guess we missed this video in model year updates. We will have to fix that
@mcandroids9 жыл бұрын
can you make a video to install flasher relay?
@TSTindustries9 жыл бұрын
On that bike it is so easy we didn't bother. You can use this video for reference kzbin.info/www/bejne/najUZZ6Kn7xmo5o . Take your driver seat off, find OEM relay, swap it for ours, replace the seat. That's how simple it is.
@twitchmania76142 жыл бұрын
@@TSTindustries does this video have the relay installed? will it flash faster than shown in this video without the relay?
@TSTindustries2 жыл бұрын
@@twitchmania7614 what you see in this video is proper 85 cycles per minute flash. This bike already had the integrated tail light and relay done before we started the flush mount installation. If the bike had a stock flasher relay the signal rate would be much faster.
@kadirusta21127 жыл бұрын
Can you remove the fuel tank cover without removing the side doors?
@TSTindustries7 жыл бұрын
doors?
@DICKTURPIN19767 жыл бұрын
Kadir usta ...sell the bike immediately 😂
@kadirusta21127 жыл бұрын
dick turpin yes friend.i pove my bike realy
@kadirusta21127 жыл бұрын
dick turpin i lowe my bike
@DICKTURPIN19767 жыл бұрын
I was just joking my man! 😃
@rapmusicluver10 жыл бұрын
Can you make this product for older cbr's as well. 2004+? please and thank you
@TSTindustries10 жыл бұрын
Unfortunately we will not be making Halos for the 03-06 600RR. However, we might release a video showing the installation of the 07-12 version on the older year models. This will require slight modification to the side fairings for the Halos to fit.
@kadirusta21129 жыл бұрын
TSTindustries can you make, wıdeo for thank fairing remomber please?air filtres ..
@nunoblade83186 жыл бұрын
Hi onde posso adquirir esses piscas ? thanks
@TSTindustries6 жыл бұрын
The link to this product can be found in the video description.
@nunoblade83186 жыл бұрын
thanks
@Jack-wc3ob9 жыл бұрын
Any for cbr300r?
@TSTindustries9 жыл бұрын
Jack Nguyen Sorry Jack, at this time we are working on Yamaha ones and currently do not have plans to release these for the CBR300
@Foxd1213110 жыл бұрын
Make these for an r6 please
@TSTindustries10 жыл бұрын
We are working on that. The R6, R1, and R3 Halo-1's are coming.
@Foxd1213110 жыл бұрын
TSTindustries when???? I'll buy haha thank u
@TSTindustries10 жыл бұрын
Team HUEVOS I can't give you an exact date at the moment but keep checking our Facebook page for all updates on future product releases.
@danielblake7045 жыл бұрын
I have the same bike 👌
@TSTindustries5 жыл бұрын
You know what to do now! :)
@danielblake7045 жыл бұрын
Just waiting for my flush mounts to arrive from you guys 👍 great videos by the way Bart
@danielblake7045 жыл бұрын
They will have the 3 pin plug already fitting won’t they ?
@TSTindustries5 жыл бұрын
@@danielblake704 awesome, thanks.
@TSTindustries5 жыл бұрын
@@danielblake704 the signals come with the wiring terminated in the connector that plugs into the 3 conductor harness socket.
@kadirusta21127 жыл бұрын
i wannt say side fairing.
@switchtx84688 жыл бұрын
Would this work with a '13 CBR 500r? The styling and turn signal look almost identical. My assumption is that you would just need a 3-2 adapter. Even the seating of the light in the fairing looks the same.