How to Install 2015-2017 Mustang Demon Eye Kit | Diode Dynamics

[@celinej8977]

Ive seen in other videos and pictures from yall's site with both demon eyes and drls is there any way you can guide me on how to sync them or wire them together? It looks really clean but want to know if there was a way to go around splicing so much.

[@diodedynamics]

Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@imperfect_Visions]

When installed does the LED face the back of the headlight housing or does it face forward??

[@diodedynamics]

Hey Sean! The LEDs actually face the side if the projector housing. You can find more installation information below! images.diodedynamics.com/docs/install/ford/mustang/15_Ford_Mustang_DemonEye_Kit_Install_Guide.pdf

[@andrewjackson5295]

I do have a question. I was wondering if I can go anywhere to get these lights installed by someone who knows what they are doing (I drive a 2016 Ford mustang v6)

[@diodedynamics]

Hey Andrew - we would recommend utilizing one of our authorized installers, which I have included a link to a map below! www.diodedynamics.com/find-a-dealer

[@stevenn5927]

Will these work on the 2021s?

[@diodedynamics]

Unfortunately, this kit is specifically for the 15-17 Mustang, and does not require baking open your headlights. However, we do have a universal demon eye kit, that would require you to bake open your headlights to properly install. Here is the link for those! www.diodedynamics.com/demon-pro-series-rgbw-set.html

[@tannerfarley9804]

Very cool, nice job guys!

[@diodedynamics]

Thank you, Tanner!

[@joansantana_]

Do I have to disconnect my battery?

[@diodedynamics]

Hi there! Disconnecting the battery isn't required for this particular product.

[@jakestech2739]

Is there a way to do this to 2010-2014 Mustang HID's without opening them?

[@diodedynamics]

To our knowledge, there isn't a way to install these without opening the head lamps. We recommend professional installation for our Universal Kit. We do offer an awesome network of certified installers! www.diodedynamics.com/find-a-dealer

[@fsp_romero891]

I have a question?? My kit didn’t come with the red wires do I need them for the lights to work??

[@diodedynamics]

The kit should have come with everything you need for the install! Go ahead and shoot us a picture of what your kit looks like to [e-mail], and our service team can help you troubleshoot!

[@burnham09]

Is there any wiring needed

[@diodedynamics]

Yes, you will need to tap a few wires to power this kit, but it's not too difficult! If you need help getting in touch with a professional installer or anything to discuss your options, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail] and our service team can assist!

[@launchcontrol6438]

How do you connect them to be able to turn on with car off ?

[@diodedynamics]

For that function, you would need to connect the power directly to the battery.

[@lray801]

Do you have the brackets for the 19 so the housing doesn't have to be disassembled?

[@diodedynamics]

Unfortunately not, just the 15-17 models - sorry!

[@lray801]

@@diodedynamics 😞 It's ok. I cleaned up on the other stuff on sale over at CJ's. 😁

[@zorafrost9881]

Hey man I’ve got a question for my 2015 Camaro what do I do when I put the demon eye head lights in do I do it on my high beam lights or low beam lights, my headlights aren’t halos they are HID.

[@diodedynamics]

Hi there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to help with that!

[@awd2.549]

I have another question about this product, I installed them and I’m wondering how do I keep them on without the car being on ?

[@diodedynamics]

Hey there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to help with that!

[@launchcontrol6438]

Hey did you ever figure this out iv been wondering the same thing!

[@yahabibi6891]

Launch Control you will need to tap in the drl light wiring

[@fishontx]

I would say wire to direct power. Like the battery. You then would responsible to turn it off when not in use, either by a app or toggle switch if you run one

[@ashtonaraguz1997]

I have a 2019 California special gt .. would these work for it ?

[@diodedynamics]

Hi Ashton! These definitely will!

[@ZenDawgo]

Can’t get it to connect to my iPhone . The light on the device is powered on and everything . Still no connection

[@diodedynamics]

Hmm-that's strange. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team would be happy to help you with that.

[@ClayManLX]

So... I can install these on my 2018 mustang but it will just be a bit harder??? But if done correctly will have the same effect?!?!

[@diodedynamics]

Hi there! That's correct! While the brackets featured in this kit aren't compatible with the 2018 Mustang, our Pro Series Demon Eyes are universal, and can be installed on any projector housing! Here is the listing for the Demon Eyes themselves: www.diodedynamics.com/demon-pro-series-rgbw-set.html

[@ClayManLX]

Diode Dynamics thank you very much!

[@diodedynamics]

No problem!

[@timojaramillo2249]

You need these for the 2018 Mustang GT!

[@diodedynamics]

Hi Timo! The Pro Series Demon Eyes featured in this kit are a universal product, and can be installed on any projector housing! If we hear anything about a bracket-based kit for the '18 Mustang from our engineering team, we'll be sure to share!

[@timojaramillo2249]

So these would install this same way on my 2018 Mustang?

[@diodedynamics]

Great question! Since a bracket-based kit isn't yet available for the '18, you'd need to open the headlight housings to install the Demon Eyes. We would definitely encourage professional installation, and would be happy to recommend a certified installer!

[@timojaramillo2249]

Absolutely! Do you have one in Albuquerque, NM ??

[@diodedynamics]

We sure do! We'd recommend checking out Southwest Speed, here is their website: southwestspeed.net/

[@1typer30a]

And what about the wiring?...

[@diodedynamics]

Hi there! Please feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to answer any wiring questions!

[@tybascue6626]

Is there a way to have them on without having the running lights on? I installed yesterday and they only come on with the running lights on as well and they are so bright you can hardly see the demon eyes trying to bleed through.

[@diodedynamics]

Hi Ty! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to help with that!