How to Install 96-00 Honda Civic 3DR Hatchback Catback Exhaust

[@RockinMTB]

I would've reused the factory spring loaded bolts where the header bolts to the cat/resonator because the engine does move somewhat under load. Otherwise it might break the welds on the header. Unless you have replaced the engine mounts with harder durometer bushings to help limit engine movement. Of course the trade off is more vibration throughout the chassis then with harder durometer bushings, but most are willing to deal with that instead breaking welds on there headers. The stress point usually being where the main runners on the header come off the head flange. That's why you see some high end headers have gussets welded in to those spots on the top side of the main runners where they meet the head flange.

[@IntelGoesHard]

I know how to put an exhaust on. I stayed watching because I like the beat

[@dnamotoring]

We're glad you liked it. 👍😎

[@trans1231000]

dnamotoring What Song Instrumental is it?

[@dennislahey5273]

Thia beat is ass

[@RiiaqCreations]

sounds amazing, glad I bought mine. it will be here in a couple days👌

[@dnamotoring]

Thanks for the feedback

[@ghostman52621]

Saw

[@dnamotoring]

PURCHASE HERE: amzn.to/2wJD1CP

[@dnamotoring]

😎😎

[@TheModAddict]

I have a DNA catback on my mustang. I have several videos on my channel of it have got a lot of views.i hope to get the DNA headers next.

[@dnamotoring]

Awesome to hear! 👍😎

[@ThatBikerDude]

Did you have to get the car tuned for that exhaust/did the car run good with the new exhaust? PLEASE RESPOND ASAP. Thanks, Josh

[@infinitig3549]

ThatBikerDude I don't have to get it tune!

[@angeldiaz4790]

Thumbs up 😎👍🏽👍🏽🙌🏾🙌🏾🙌🏾!!!! This how I like vids no bull shit st8 to the game bright n clear. Salute!!! Well apriciated 💯💯😎🙌🏾🙌🏾

[@dnamotoring]

We're glad you liked it. 👍😎

[@whatheck6709]

Hi DNA, i was wondering if this system will bolt up to the factory combined Header+Cat? Or is it necessary to have an aftermarket header? Thanks

[@Unaveragebean14]

Hey I have the whole exhaust manifold for my stock civic coupe and I was wondering would the exhaust still be loud if my civic was stock?I put it on and the middle pieces is melded In a weird angle

[@dnamotoring]

Changing out the muffler would make it louder still.

[@richardrivera9268]

So I have same car .....and I got a dna header with down pipe and test pipe 3 piece combo....will I need a special set up to finish my exhaust or can I just bolt on one of the other dna bits n keep going ?

[@richardrivera9268]

Kits

[@rodfam9810]

Did you put the aftermarket header on also? Or is it stock?

[@lld9888]

EGLIXER RODRIGUEZ aftermarket

[@crazyry21]

This beat is smooth

[@dnamotoring]

We're glad you liked it. 👍😎

[@diecaprisonne643]

hi... i need a full exhaust system for my EK3 with d15z6. can you show me how i can find it? and ship to germany?

[@CrazyGunNoob]

So I recently ordered a full DNA exhaust for my 2000 HX, including headers. The question is, I have to legally run a cat, which I ordered an High Flow one, I just don't know if I should run the O2 senor after the cat, or before the cat since your headers have a spot for the O2 before the cat on the downpipe. I know I have to use the one for upstream, which wont be a problem, just curious if I run the downstream before the cat if I will get a CEL. Anyone know? Thanks

[@tylerkessler3515]

If you only run one o2 sensor then you will throw a code cuz 96-98 civic are obd2a and 99-00 are obd2b and the ecu look for 2 o2 sensors the upstream and downstream. And thats why a lot of ppl especially ppl that are bhilding their cars will buy ecu jumper harnesses to convert their car from obd2a or obd2b over to obd1 and use a obd1 ecu. Obd1 only looks for one o2 sensor and thats the primary or upstream one and thats it so they only have to run one and wont throw a code for it. Plus theres other sensors and things that obd1 doesnt look for that obd2a and b do look for so obd1 just gets rid of all the unnecessary and restricting sensors you really just dont need and therefor makes obd1 ecu a hell of a lot easier to be able to tune. And tbh even if you're not building your car to be fast or whatever it's still a good idea to convert to obd1 anyways. All you need is a obd1 ecu for your motor whether it's vtec or non vtec and then a jumper harness which you can get for like 15 to 20 bucks on ebay and its literally just plug and play and that's it. And usually the downstream o2 sensors should come after the cat not before

[@brycel4007]

I just got this exhaust for my 98 civic hx manual. I need to get the test pipe now because it wasn't included lol

[@dnamotoring]

Thanks for the feedback

[@ganggang2002]

Did you use a test pipe for the headers and the exhaust because it was a different pattern and if you did can you tell me what size the test pipe was

[@dnamotoring]

Yes. We have more information here. amzn.to/33X73yD

[@axelbotello4518]

@@dnamotoringI just recently bought this and I have the same problem as the guy above I tried to click the link but it no longer exists !

[@trans1231000]

Did you Removed the Silencer or Not?

[@aidenharemza2395]

Do I have to order the cat too?

[@IkarosCanFly]

How quickly will this rust?

[@robfassi3297]

It won’t it’s stainless steel

[@deadassyo6080]

Sadly mines didn’t fit its was a tad short

[@darc1027]

What size are the spring bolts?

[@demarcusrobinson3550]

Is there a catback for my 93 honda civic dx coupe

[@dnamotoring]

amzn.to/3lk61qA

[@nomajhondeere3324]

Is this that wish brand

[@dnamotoring]

We sell on wish, ebay and amazon. It's our own brand - DNA Motoring.

[@ma036951]

is there one for a 2000 honda civic lx sedan

[@rodfam9810]

Trokiando 479 yeah it’s 96-2000.

[@Theproph35]

How can I purchase one for my 98 Civic hatch?

[@dnamotoring]

This item is out of stock. We will have more within 2-3 months. amzn.to/38JjVNV

[@mohcenbdj8071]

What a sound 😍

[@dnamotoring]

Thanks! 👍😎

[@Luis-bu5mr]

Will a 4 door sedan exhaust system fit on a hatch, help anyone? TIA

[@TheShawVMedia]

You'd have to shorten the rear section of it due to the sedan being longer. Everything up front would fit though.

[@Liemannes]

If u want a exhaust system for youre sedan, search for a sedan or coupe, cuz they both have the same length

[@revenant_yt1388]

Will it fit my sedan?

[@dnamotoring]

This item fits 96-00 Honda Civic 3-Door Hatchback SOHC.

[@1habib61]

Where is link to buy ?

[@dnamotoring]

amzn.to/3evKXMj Currently this item is out of stock.

[@javiermarcial2650]

This is not the exhaust you guys have on your website the design is very much different you guys can get people to buy the wrong stuff

[@madmadmedled9567]

What motor is in this car thinking about ordering one

[@garymijangos9403]

Madmad Medled d16y7 non vtec

[@trans1231000]

Gary Mijangos I have an LX Model. And the Sound sounds Exactly from NFSU2 when it’s All Tuned Up

[@thatfooskye5405]

do you need a test pipe for the catback or does it come with one

[@benjaminshoaf3423]

no it doesn't come with one. You need to get it. I put mine on and realized that I needed it. 👎🏿

[@ganggang2002]

@@benjaminshoaf3423 why do you need a test pipe is it because the aftermarket headers and the aftermarket exhaust pattern is different tell me why and what size is the test pipe needed I got a 1998 honda civic hatchback dx d16y7

[@trans1231000]

Gang Gang It’s a 5 Inch DNA Test Pipe it’s Available in Stainless Steel Chrome or Ceramic Black

[@tylerkessler3515]

You need a test pipe to make up for the space where the catalytic converter normally would be. Since theres now no cat then there will be a gap inbetween the header and the midpipe therefor you buy a test pipe whatever length the space is ypu have and then just bolt it in and youre done.

[@jimkirk216]

How do I connect the 3 piece bolt part to a 2 pieces plz I need help lol

[@dnamotoring]

ebay.to/3c7svWF

[@papawooks]

@@dnamotoring you are goated thank you this is exactly what i needed

[@kdmscarlett2012]

Honestly it sounds better without the cat, makes it so much louder

[@trans1231000]

Dustin Johnston It’s a High Flow Test Pipe it makes your Car Breathe Better and more HP to your Car

[@gurjindersingh199]

2.5" ?

[@dnamotoring]

Inlet / Outlet Diameter: Catback: 2.25" Inlet

[@benboo9489]

The exausth of wish???

[@ganggang2002]

Dna motoring ebay

[@dnamotoring]

We sell on wish, ebay and amazon. It's our own brand - DNA Motoring.

[@bobwasabi6139]

song?

[@yupitellwhut]

Darude - Sandstorm

[@dnamotoring]

Sorry, we don't have that information available.

[@bigace511]

Holy shit putting this in a mini me no vtec solenoid wish me luck

[@dnamotoring]

Thanks for the feedback

[@AHS_motorsport]

thats a lot of blue

[@dnamotoring]

Thanks for the feedback

[@captintemplar3705]

My bolts are rusted shut🚶🏿‍♂️

[@dnamotoring]

😦

[@centraltexascivic7299]

I wish I would of got a sticker with mine hint hint

[@dnamotoring]

Thanks for the suggestion. We use to give out stickers, but haven't since. It's possible we may in the future.

[@centraltexascivic7299]

@@dnamotoring yes I went through my box for my cat back system that just came in and couldn't find it I was kinda like bummer but it's a really nice system at a really really good price

[@angelgarcias7328]

Got black header for ebay $90 dollars know got the Downpipe ebay for $35 dollar take out catalict convetor put it you thing can do any damage to my motor know tell me the Downpipe only for car racing my got original motor i know you know b Honda civic can see how you got you car nice let me know please you thing can life it any take out the car it no racing thank you