How to install a BLTouch on a CR-10s Pro *UPDATED*

  Рет қаралды 74,707

3D Printing Canada

3D Printing Canada

Күн бұрын

Пікірлер: 210
@Berserker0902
@Berserker0902 5 ай бұрын
anyone watching it in 2024? I just installed it (v3) on CR10s pro V1. Initially I did not put the jumper because in other videos they did not put it, but this is indeed the definitive guide. I followed the steps in the video including the jumper and changing the order of the cables and it worked! Thank you so much :)
@antonioteacher
@antonioteacher 3 ай бұрын
Hello, from which website did you buy the kit to put it on the cr10s pro V1? ... I want to buy for my printer without failing in the attempt, please help me with that information friend.
@rOSScOGITANS
@rOSScOGITANS 24 күн бұрын
kept this printer for a long time, I use it often, together with a prusa mk3s and a bambo x1c, its print quality is unsurpassed, all the pieces compared are decidedly better on the Creality, obviously I'm talking about prints with PLA and Petg, for other filaments perhaps further modifications need to be made, the only important flaw is that it is very slow but for me it is not very important
@Marco_Onyxheart
@Marco_Onyxheart 17 күн бұрын
I am following it as well for the same printer. But I'm not sure where to get the LCD update, the repo has been reorganised and I don't see the LCD thing anywhere.
@antonioteacher
@antonioteacher 16 күн бұрын
@@rOSScOGITANS How fast have you been able to print with the CR10s Pro? I'm new to this and I don't know how fast I can make it work.
@rOSScOGITANS
@rOSScOGITANS 16 күн бұрын
@@antonioteacher between 50 and 100mm/sec, not possible faster
@ryanrm8547
@ryanrm8547 3 жыл бұрын
EXCELLENT GUIDE! Thank you so much! I've bought my BLT probably 9mos to a year ago and have been putting off installing it. But I finally got sick of messing with the sensor on my v1 when my Pro v2 with BLT is so dependable. Used your guide and the conversion went smoothly! Thanks!
@leonh7651
@leonh7651 4 жыл бұрын
For the people who just bought the CR-10S Pro and got dissapointed badly as me for such an exspensive machine to have such poor leveling quality is this video awesome. thank you.
@antonioteacher
@antonioteacher 3 ай бұрын
Hello, from which website did you buy the kit to put it on the cr10s pro V1? ... I want to buy for my printer without failing in the attempt, please help me with that information friend.
@leonh7651
@leonh7651 3 ай бұрын
@@antonioteacher that was a dutch site so i think i won't be able to help you
@japerelectronics2568
@japerelectronics2568 4 жыл бұрын
Thanks, this worked beautifully. We went from fiddling with the bed knobs every print to it just working.
@raph_duhamel3170
@raph_duhamel3170 4 жыл бұрын
Hey, I have an issue. When I touch the leveling button the bltouch doesn't respond, the head just goes down without stopping and the bltouch pin doesn't comme out. Pls help me if u had this issue
@japerelectronics2568
@japerelectronics2568 4 жыл бұрын
@@raph_duhamel3170 Is this on a new install or an established printer? If its on a printer where it did work it needs to be replaced they do go bad. If it doesn't work on this upgrade I would say walk through the steps again. I can assure you it works on this printer.
@raph_duhamel3170
@raph_duhamel3170 4 жыл бұрын
Im not sure what u meant by established printer but its my printer and the auto leveling sensor wouldn't stop crashing in the bed and the cable was having issue so I decided to change it for a bltouch, buuut, i bought one of amaeon instead of buying the one in the description. So I guess I'll just send it back and by the one from 3d printing canada
@japerelectronics2568
@japerelectronics2568 4 жыл бұрын
@@raph_duhamel3170 I meant did it ever work or were you upgrading your V1 printer?
@raph_duhamel3170
@raph_duhamel3170 4 жыл бұрын
Yeah it worked at firdt then the cable got broken somehow but it never worked with the bl touch
@kyrie26
@kyrie26 4 жыл бұрын
Thanks for this helpful guide! And thank you for stocking the extension cable when no other place does!
@3d_dos452
@3d_dos452 3 жыл бұрын
I did all the video but I loaded the firmware of tinimachines, when I turn it on the printer does not go down and the bltouch remains in the air about 30mm and there is no case that it goes down ... I do not know what the error
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
Wow I just ordered on Friday from you guys and I received it Monday today that’s insane all the way to the COUNTRY OF Sweden DAMN NICE
@dragoro3033
@dragoro3033 2 жыл бұрын
Hey, I really hope you see this. I want to do this, but I am going to have to get a touch creative with what I do (as I am running klipper and already have a direct drive modification). I wanted to know if you have the information for where this is connected on the board (for klippers sake) so I can program it properly? I think it will still work, but I need a little knowhow and pin names to get it right. What are the black and white cable for and what are the colored cables for? If one is power and another information, that may play a key role in how I program my settings in klipper If not, the only other thing I wanted to ask is what are these pins called? My BL Touch did not come with extra nuts or the jumper. I want to know what jumper is used: what size jumper, what size/name are the pins the jumper will attach to. Also, your link on longer leads to the extension wire you described, but I got lucky to find one on amazon.
@amoonm6r88
@amoonm6r88 2 жыл бұрын
hey did you manage to figure it out? I'm having the same problem
@murraydarrall5700
@murraydarrall5700 5 жыл бұрын
Great tutorial. I have the V2.4 board and a BL Touch bought this week so V3. The 3 pin connector supplied has Yellow Blue Red wires and not the yellow red brown in the video. Do I still swap the 2 cables (red and blue in my case) The connector for the black and white cable connector in my kit is a red 2 socket connector - do I just plug this into the 3 pin socket on the board? Or should I replace the cables? Also do I still need to flash the firmware as this tutorial suggests? Thanks for any advice as this is really confusing with all the boards and touch versions.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
If you download firmware from the links below, you will get card refresh problems. Try whatever but if you want tiny machines firmware, then use Z- connector - install LCD display from here but the firmware directly from tiny machines page - B7 hex. If you want to use creality BL touch firmware, use Z+ connector. You need to flash the display and firmware too..
@zainec1
@zainec1 3 жыл бұрын
what was the decision on the red and blue wire ? still swap them?
@SimPilot-dl8zy
@SimPilot-dl8zy Жыл бұрын
Bl touch software link is broken. Now what do we do? What poor support. You deleted the video showing the bl touch software install. Now what?
@ardmison
@ardmison 2 ай бұрын
creality cloud my dude
@josephsupples5596
@josephsupples5596 3 жыл бұрын
Help... If I have a CR-10 pro v2 what is the installation procedure. I have a v2.3 machine
@luissegura3017
@luissegura3017 3 жыл бұрын
There's no answer, please let me know if you find around some info pls
@benknrobbers
@benknrobbers Жыл бұрын
Hi, I'm looking to buy one of these, but every component seems to be sold out on both the canadian and us stores.
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
I got sent to me a bl touch on the box it says Creality V.1 main board will this still work on Cr 10s pro
@robertavery8897
@robertavery8897 5 жыл бұрын
Thank you, thank you, thank you. I was having a problem with a bltouch I purchased online from another supplier. Followed their instructions and just could not get the thing going. I talked to you guys and then ordered a bltouch from you and when it came I followed this video and then went through the setup. I turned the printer on, did the setup and the BLtouch worked perfectly. Let me tell you ... there is no substitute for good technical help and good supplies. Now I can get back to using my printer .... the bed leveling accuracy is outstanding. Thanks Paul and Chris and the rest of your team for outstanding service.
@avejst
@avejst 5 жыл бұрын
Nice to see the BL touch in that CR10 pro! Thanks for sharing 👍😀
@BlackWolf42-
@BlackWolf42- 4 жыл бұрын
I'm curious - I have a BLTouch and was going to replace it with one of the inductive or capacitive sensors. I'm stumped as to why you would go to a BLTouch from that beautiful sensor that's included.
@jackzhao604
@jackzhao604 Жыл бұрын
Personally it’s a lot less inaccurate. A magnetic field controlled sensor in my opinion has too much variation than a physical stick that literally contacts the bed. Magnetic fields can be effected by many many different things, like temperature will mess with it. But a stick is a stick, it’s gonna be the same length every time no matter what
@BlackWolf42-
@BlackWolf42- Жыл бұрын
@@jackzhao604 I posted that Q 2 years ago and since then, I've tried all the bed sensors available. So far, the best I've had so far is a physical microswitch attached to the print head (klicky-probe).
@jackzhao604
@jackzhao604 Жыл бұрын
@@BlackWolf42- i don’t doubt it, you can’t beat a physical button, they don’t lie
@USAIPHONE
@USAIPHONE 5 жыл бұрын
Hi I have following all the steps alined my bed and Z home distance, but when start printing the nozzle is to high and can not print anything what can be wrong is there another adjustment I need to know Thank you in advance
@jazzmanparker
@jazzmanparker 5 жыл бұрын
this is exactly what i am seeing, i think its something to do with the updated version of marlin as my auto bed leveling is doing a 5x5 grid now where it used to do 4x4 and the screen only shows the results in a 4x4 grid. edit: a quick google shows this might be an issue with marlin, looks like theres a guide for fixing it here: forum.duet3d.com/topic/7705/bl-touch-correct-offset-when-homed-too-high-when-printing
@ipodsync
@ipodsync 5 жыл бұрын
Awesome tutorial! Thanks 3D Printing Canada!
@gzovrs6206
@gzovrs6206 5 жыл бұрын
hello install all the sensor is fine but I have displaced axes have some firmware that I can use to correct that or how to do it thank you
@andreasepp6740
@andreasepp6740 3 жыл бұрын
NEW FIRMWARE DOWNLOAD: www.creality.com/ Support> Download> CR Series Firmware> Page 2> CR-10S Pro 3D Printer> CR-10S Pro BLtouch firmware.zip
@pawelw.9172
@pawelw.9172 5 жыл бұрын
why did you use TM firmware instead of the creality 1.6.8 BL one? Also can't see you used a jumper whereas Antclabs tells you to do so?
@djrocc-jamaica3527
@djrocc-jamaica3527 4 жыл бұрын
Hi this is a great video. Just checking, the wire to BL Touch close to hot end is heat resistant?
@hilariosoares4871
@hilariosoares4871 4 жыл бұрын
Hi, please where can I buy the Kit (BL touch, support and other parts) that are presented at the beginning of the video?
@rogerclements2005
@rogerclements2005 3 жыл бұрын
My kit didn't come with humber and the z- plug is only a 2 pin doesn't fit in, I have even bought 2 different kids. Both labeled for 10s pro.
@st0mper121
@st0mper121 5 жыл бұрын
Question: 1 what size are the nuts you need to get the plastic part to screw in. (for the bltouch to attach to your i guess extruder mount? i guess its called? only 2 nuts came in my bltouch kit not 4 that is needed. i noticed that you flashed the LCD but you did not flash the printer itself? does the firmware in the printer need to be flashed as well? not just the lcd?
@dedemc849
@dedemc849 5 жыл бұрын
Nice tuto, thanks.With the T3D B7 firmware we can download below, the BLTouch offsets with this support are already configured in config.h? Thank you for the answer.
@coriaislinn7487
@coriaislinn7487 3 жыл бұрын
thank you so much guys, it worked perfectly!!!
@joesalz9963
@joesalz9963 3 жыл бұрын
Is it really required to swap the orange/red and brown cable? My 2m extension didn't come with the white connector on one end (to connect directly to the BL Touch) instead, it connects right to the cables that came with the BL Touch without the need to unplug the original ribbon cable from the BL Touch.
@xr8dmoose135
@xr8dmoose135 5 жыл бұрын
thanks for great tutorial - i was going to buy the touch off you guys despite me being in Australia, but damn you guys need to get an international shipping contract... $90 postage. Pricing is not normal, in anyway, i have ordered things from cananda that weighed over 3kgs for alot less
@johnc7863
@johnc7863 5 жыл бұрын
Hey Guys, Everything worked great and my BL touch has made a huge improvement! The only issue I have is my printer won't revover from a pause programmed or manual anymore. Is that an issue people have encountered?
@bre86
@bre86 5 жыл бұрын
Yes. Same issue here. Any resolution? Also if I job Z+ rapidly I've had the software crash.
@johnc7863
@johnc7863 5 жыл бұрын
@@bre86 no resolution from anywhere. Apparently it's a trade a known issue that hasn't been fixed.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
@@bre86 many issues with the praised tinymachines firmware, worte to printing canada to at least place information about possible problems after uploading, I am getting back to oem firmware.
@YaFunklord
@YaFunklord 5 жыл бұрын
I remember reading that this is a known issue with the Tinymachines firmware, because they are using the memory for something more important.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
@@YaFunklord I talked to Canada Pringing, they are really helpful but somehow they will not admit tinymachines stuff is buggy. I am really happy with creaitive 1.6.8BL except the fact I will probably have a source code of it.
@Gasrovescio
@Gasrovescio 5 жыл бұрын
I bought BL-Touch v3.0 from you some time ago, now what should I do? buy back the leveling device or just put the Jump?
@keithruhl3545
@keithruhl3545 3 жыл бұрын
My wires on the black connector are red, blue, yellow and my white connector has blue, red, yellow, black, and white wires?
@channantha
@channantha 4 жыл бұрын
my bltouch didnt come with a jumper cap,. do i need one? I bought a bltouch v2. it looks like i wires are different colors too
@silmaz40
@silmaz40 4 жыл бұрын
I have done everything you said in the video and description but it is not working..bl touch is working it is led and probe is working but printer is not stopping at z axis by itself.. what is wrong? help me please..
@anthonymilton2207
@anthonymilton2207 3 жыл бұрын
The link isn't working in the Github. Do you have another please?
@amishpark4010
@amishpark4010 3 жыл бұрын
Same, cant find the file. Please help
@ACKET2009
@ACKET2009 2 жыл бұрын
Hello! I want to replace the original sensor to bltouch on my CR-10S pro. 5 wires cable must be 1800mm? Really? May be I can make it some shorter? Oh... Thank's I did it! With some differences from this manual, but it work! I have used a flat cable from the controller to a breakout board, I routed it in the same hole with the original cable, then I has make a connection and next route a silicone wires to a print head, where I has place the additional connector to BLTouch...
@hilariosoares4871
@hilariosoares4871 4 жыл бұрын
Hi, Please, you can better detail the type of jumper you used at the location of the primitive sensor plug. It appears to be a Jumper with 2 Dupont pins. If you can, attach images and specifications about the Jump. Sorry, but I have little experience in the matter. best regards
@MrWatercooled
@MrWatercooled 4 жыл бұрын
The jumper comes with the Bltouch
@MrWatercooled
@MrWatercooled 4 жыл бұрын
Here's a link to what it looks like www.digikey.ca/en/products/detail/wurth-electronics-inc/60900213421/2508447?Shunts%2C%20Jumpers&Shopping_Product_Connectors%2C%20Interconnects_NEW&productid=2508447&gclid=CjwKCAjw_NX7BRA1EiwA2dpg0oAhHGzvdSzOGeVh-M7HE1SvsTk0VWXBZz5a3c9cXiJ_M32R3golaRoClz0QAvD_BwE
@ericBcreator
@ericBcreator 4 жыл бұрын
Thanks a lot for the tutorial, just installed the BL touch and it is working great. I'm using the DW6 firmware.
@lajulasse4332
@lajulasse4332 4 жыл бұрын
Hi, just followed this tutorial and it worked like a charm. For now I've been adding an autobed level before each print with simplify 3D but that seems overkill. I'm thinking of just doing one manually from time to time. The question is how do you do this? Do I just go in the autolevelling menu and do a measurement?
@seanjuth
@seanjuth 3 жыл бұрын
The cr10spro is an extremely unpredictable printer. I’d keep the auto bed level every time
@ElvargMovies
@ElvargMovies 2 жыл бұрын
​@@seanjuth Its not that bad. I deactivated Auto bed level because I print on a piece of mirror held in place with some clips, the printer would crash if it auto levels. I got really nice results with manual leveling. But now I relocated the clips so the printer is able to auto bed level again. I modified my printer with: Synchronized Z-Axis Anti backslash nuts (Z-Axis) when printing a calibration cube i get X +0.02, Y +0.00 and Z +0.02 (20x20x20) Maybe i will add BLTouch to it soon
@seanjuth
@seanjuth 2 жыл бұрын
I accidentally ordered a blotchy for the v1 motherboard, but my cr10s pro has a V2.4 mother board. The smaller just connector that is supposed to be three pin, has the same connector as the y-cable. Will my bltouch still work?
@Explore531
@Explore531 3 жыл бұрын
do you know how make a backup copy of the firmware so when in the future I can put newer firmware update ?? thanks
@Petro6131
@Petro6131 5 жыл бұрын
hello I have everything installed after the instructions. Everything was in order. after switching on, the z-axis did not move to minus. Starting position approached and the Z-axis moves to plus. Even when leveling, the Z-axis always drove in plus. At every step further to plus. I checked everything again and found no mistake. What could that be? Can you help me? Best regards Peter from Germany.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
Hello did you solve the problem, because I do have the same issue on original creality firmware. I resigned from using tinymachines firmwares because there were problems with SD card refresh, but the axes worked ok, now after flashing with original firmware, the SD card works ok, but I have the Z home issue which goes to plus only.
@Petro6131
@Petro6131 5 жыл бұрын
@@pawelw.9172 I did not solve the problem. I'm back to the initiator. I have good results with it.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
@@Petro6131 what do you mean by initiator?
@Petro6131
@Petro6131 5 жыл бұрын
@@pawelw.9172 www.amazon.de/gp/product/B071FTP2ZP/ref=ox_sc_saved_title_10?smid=A1ZJKGYC1NCLC9&psc=1
@pawelw.9172
@pawelw.9172 5 жыл бұрын
@@Petro6131 ok, what version of firmware do you use now? because my printer had 1.7.1 printer on it, do you know I can get it anywhere?
@kaganarisut
@kaganarisut 4 жыл бұрын
Hello. Xloader finishes updating with 0 bytes updated message. also cura is stucked at firmware upload pgress bar. promterface is OK with connecting and managing printer. any ideas? changed all baud rates and tried. firmware file is confirmed with tinymachines support. its CR10Pro_Stock_BIL_DW5.hex as of Feb.20
@johnc7863
@johnc7863 3 жыл бұрын
So firmware hasn't been updated in two years. Any way this can be made to work with Tiny Machines firmware since they updated it really nicely?
@Bobbobinson4
@Bobbobinson4 5 жыл бұрын
When I try and upload the Firmware with Arduino there is nothing detected in ports and the computer doesn't seem to detect the printer when plugged in with the cable. Even when I try and turn on the printer the screen turns on but is just black and nothing seems to happen. Any assistance would be appreciated
@jackzhao604
@jackzhao604 Жыл бұрын
Creality website no longer has the firmware download for this printer, where can I find it?
@connormack9828
@connormack9828 Жыл бұрын
did you get a solution for this
@jackzhao604
@jackzhao604 Жыл бұрын
@@connormack9828 I just used the CR10S pro V2 firmware and LCD DWINSET. You also don’t need the jumper cable to short anything, just use the Z+ port instead of Z- shown in the video, everything else is the same. Lmk if you need more clarification!
@MoistDreams
@MoistDreams Жыл бұрын
Necroposting buuuut, I think someone will want this, github.com/InsanityAutomation/Marlin/releases for the actual pre-built firmware for creality/others and/or github.com/InsanityAutomation/Marlin/tree/CrealityDwin2.0_Bleeding if you want to compile your own form latest sources. Inside the source assets, there is a HEX folder that contains a whole slew of pre-built hex files for flashing onto your mainboard, you will also find the latest combined landscape LCD firmware. THERE ARE FIRMWARE IN THE PRE-COMPILED HEX FILES FOR ALMOST ALL CREALITY PRINTERS AND MODELS, INCLUDING VARIOUS HOTENDS, AND BED LEVERS you will probably want the CR10-S 10 Prov2 using Z+ firmware or the CR10-S Pro BL hex these should work for the two main installation types of the BL Touch, the LCD firmware is compatible with all the pre-built firmware the current latest of posting is Marlin 7.4.7 TM3D DWIN builds.
@klawz1801
@klawz1801 5 жыл бұрын
Mine flashed onto the measuring screen and then back and then the screen is just frozen on the levelling mode screen
@megaobi
@megaobi 4 жыл бұрын
Is this for all versions of bltouch
@tejasbopannanv223
@tejasbopannanv223 2 жыл бұрын
Thank you so much for the video, my cr10s pro was not getting repaired, this vid was boon
@Yofer212
@Yofer212 2 жыл бұрын
I can't find a working Marlin link for Tinymachines, have they stopped handing this out? Tried using Creality CRX Firmware but it sucks! Anyone got a new link or can suggest Firmware to use for CR10S Pro?
@level-upengineering5813
@level-upengineering5813 2 жыл бұрын
did you find a solution for this ? i've just added a bl touch to mine and realized i cannot find firmware.
@scottwinchester6162
@scottwinchester6162 2 жыл бұрын
@@level-upengineering5813 Did you manage to find the firmware for this mate?
@NickS34252
@NickS34252 4 жыл бұрын
You also need to compute the x and y probe offsets as well don’t you?
@jvalentin62
@jvalentin62 5 жыл бұрын
So this can't be flashed on a stock CR10 S Pro?
@3DPrintingCanada
@3DPrintingCanada 5 жыл бұрын
With a BL Touch v3.1 yes
@jvalentin62
@jvalentin62 5 жыл бұрын
@@3DPrintingCanada I just flash your firmware to the stock firmware. This is my first time doing any mods to this machine.
@louissenn9897
@louissenn9897 4 жыл бұрын
Does it work with V3 bltouch
@bre86
@bre86 5 жыл бұрын
Made a huge improvement. However be warned the software doesn't refresh the files on the flashcard if you put it in a second time.
@jackwaterman2274
@jackwaterman2274 5 жыл бұрын
So how do you recover? I did not see any details on how the files should be arranged on the microSD card, I just copied over the directory, 10sPro_1.70_ScreenFiles. And inserted the microSD and powered up. It quickly downloaded, reporting 0 files for all of these: .cfg, code, .lib, .h2k, .bin, .d2k, .ico, .wav and .bmp. Now when I put the contents of the 10sPro_1.70_ScreenFiles\DWIN_SET directory at the top level of the microSD card, it no longer tries to download. ****So, how do I recover? ****** Note that I looked around to see what a typical microSD card contents should look like BEFORE I did the first insert - but never found any information about that. So I expect all these files should be at the root of the microSD cards.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
the same problem here, you need to switch off/on for the printer to see new files on the card... the software seems to have some bugs too, often crashes on homing just before printing... perhaps switching to OEM display flash and firmware will solve the issues.
@pawelw.9172
@pawelw.9172 5 жыл бұрын
found sth: www.thingiverse.com/groups/creality-cr-10/forums/general/topic:31455 perhaps it will solve the issue? it looks that tinymachines firmware stuff is not polished.
@bre86
@bre86 5 жыл бұрын
@@pawelw.9172 I was thinking the same thing. Does the OEM software support the BL touch?
@pawelw.9172
@pawelw.9172 5 жыл бұрын
@@bre86 there is a display and board firmware at creality site for 10spro bltouch, I am gonna try today. YEsterday I did these lines in Marlin but there was no result.
@yzkid9747
@yzkid9747 3 жыл бұрын
the link for the extension cables are no longer available, can anyone help?
@kuksinsky
@kuksinsky 3 жыл бұрын
All the wires you need are included with the bltouch package.
@jeroenvanderplank
@jeroenvanderplank 5 жыл бұрын
hi, i did all the steps, but when i test the bltouch with my finger, is keeps going down. What could that be?
@lio3dlab654
@lio3dlab654 5 жыл бұрын
same u ..i get crazy
@plankie
@plankie 5 жыл бұрын
Okay, i found the issue. The jumper wasn't making good connection between the 2 pins. Took another jumper and now it works fine!
@daden61
@daden61 3 жыл бұрын
why do none of the github links work. i need to do this to my cr10s pro.
@borisbommen
@borisbommen 4 жыл бұрын
PLEASE HELP! I did everything in the video but when uploading the firmware it cannot find the port and the memory is to little to run stable it says. I have a non working printer now. Can somebody tell me how to fix this issue? Thanks!
@screamingchicken83
@screamingchicken83 4 жыл бұрын
Did you ever get this sorted out? I'm having the exact same issue now.
@borisbommen
@borisbommen 4 жыл бұрын
@@screamingchicken83 yes install a driver I don't know where but I fixed it. Search for it online :)
@yanir.tzabary
@yanir.tzabary 4 жыл бұрын
Why need it of to cr10 s pro have it?
@peteradshead2383
@peteradshead2383 4 жыл бұрын
what is the difference between the 115k and the 250k hex file
@jackzhao604
@jackzhao604 Жыл бұрын
Don’t use the Z- port for your black and white wire, too much work, just use Z+ port the exact same way and use cr10sprov2 based firmware, works much better and doesn’t need to short anything.
@ordnaelshideout
@ordnaelshideout Жыл бұрын
Hello, maybe you know a solution to my dilemma. I have a secondhand CR-10s Pro with a BLTouch installed and TinyMachines firmware. I'd love to start using the Creality Sonic Pad in order to get Klipper, but I've read of people having to "downgrade" back to stock Creality firmware for that. I read you suggesting using the Z+ port and CR-10S Pro v2 firmware: do you mean using a stock Creality firmware rather than TinyMachines'? Have you done that yourself and does it work?
@webslinger2011
@webslinger2011 Жыл бұрын
Nice! Worked for me. Used the same firmware for the pro v2. Thanks!
@webslinger2011
@webslinger2011 Жыл бұрын
Unfortunately, I used the 3dtouch clone. So it's failing at autoleveling.
@powertrip1738
@powertrip1738 5 жыл бұрын
Does version 3 use the same pin connection?
@Gasrovescio
@Gasrovescio 5 жыл бұрын
up
@digaum
@digaum 5 жыл бұрын
Up! Does the v3.x use the same pin connection set-up?
@Gasrovescio
@Gasrovescio 5 жыл бұрын
Up
@Gasrovescio
@Gasrovescio 5 жыл бұрын
If i have the version V3 ?
@b230ms
@b230ms 5 жыл бұрын
Why doesnt it z-home at center of bed?
@igoaaronlu8142
@igoaaronlu8142 3 жыл бұрын
what shoul i do when updating motherboard firmware go wrong?
@st0mper121
@st0mper121 5 жыл бұрын
forget firmware? you flashed the LCD but not the printer? is your printer firmware tiny machines or creality?
@flexplexico480
@flexplexico480 5 жыл бұрын
Thanks for the heads up - I put a notification in the LCD flashing instructions. Marlin can be flashed at any time. We are using the Tiny Machines firmware.
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
How come u did t do the AUX LEVELING WHY DID U SKIP IT
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
Awesome I’m Canadian living in Sweden here :) from London Ontario :) One question . What’s a good firmware for the inductive sensor . I wanna buy the bl touch for my Cr 10s pro but what should I use till I get bltouc
@YaFunklord
@YaFunklord 5 жыл бұрын
Also Sweden, had the cr10s pro for 1 week, just received an inductive sensor and waiting to get a bltouch and loads of other parts. Mine was pretty useless out of the box, the metal bed is warped 0.2+ higher than the sides and the capacitive sensor just gives screwed up values and had to be deactivated. Tried a glass bed which is very level, but instead is much slower for heating and cooling, trickier for adhesion and it might not even work with a capacitive sensor. I'm hoping to use these two sensors simultaneously and keep upgrading things until the printer requires no more babysitting after switching on. The inductive sensor alone should not require different firmware, only BLTouch does, since it's wired differently. If you are in Stockholm maybe two heads are better than one for getting this printer fixed up ;)
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
Ducklord I’m in SKÖVDE . Will b going to the 3d meet in Helsingborg maybe we can catch up there :)
@legodesigns1
@legodesigns1 4 жыл бұрын
Is this lCD update necessary?
@marcogutierrez9339
@marcogutierrez9339 4 жыл бұрын
Do I need to install Arduino IDe for this to work?
@theresmoretolifethanmeetst7579
@theresmoretolifethanmeetst7579 3 жыл бұрын
Great Video. if anyone knows the pin names [bltouch] sensor_pin: ????? control_pin: ????? for the CR10S Pro, I would really appreciate it, I've been stuck on this for sometime now
@alexandreducrocq3786
@alexandreducrocq3786 5 жыл бұрын
you don’t have the cables anymore??
@BuyBuildThrash
@BuyBuildThrash 5 жыл бұрын
Does anyone know where to grey the mount for a cr-10s pro.. It's all pointless without this mount in a kit.. So anyone know of a super fast shipping
@eggiereyes4586
@eggiereyes4586 5 жыл бұрын
Kenny S wich mount you mean ? Do you mean the one for the BL sensor
@BuyBuildThrash
@BuyBuildThrash 5 жыл бұрын
Yes for the bltouch. Couldn't find one so I just bought a 75$ kit from tiny machines
@tehKaito23
@tehKaito23 5 жыл бұрын
Why should one change the level sensors? :o
@JunkieVirus
@JunkieVirus 5 жыл бұрын
if it gives different readings, the you start the printer after the bed cool down of turned of. or the sensor itself is encountering calibration issues because of envouirement things like temperature etc. the base sensor from the cr10s pro is a problematic one. you can check a video on my page to see what ... it can be
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
Will u be inställning the new version 2 Cr 10s pro V2 firmware 1.1.6 bl touch
@Gasrovescio
@Gasrovescio 5 жыл бұрын
sure ? the motherboard it's the same ? and the connections of bltouch ?
@ktm890rsweden5
@ktm890rsweden5 5 жыл бұрын
@@Gasrovescio bltouch seems to be of 3.1 and the same mother board of 2.4.1 . i tried it on my bltouch 3.1 it would always switch to chinese then freeze thats the only problem i had but everything else was ok needs more testing my opnion
@Gasrovescio
@Gasrovescio 5 жыл бұрын
@@ktm890rsweden5 I own bltouch v3.1, but do you think the links are the same as those found on guides like youtube? in theory if the motherboard is the same and the motors are the same I don't see why there can be problems. are you sure we have 2.4.0 and not 2.4.1?
@brooklynbound75
@brooklynbound75 5 жыл бұрын
Anyone know if the kit comes with the m3 bolts mentioned ?
@marcogutierrez9339
@marcogutierrez9339 4 жыл бұрын
The bolt to mount the sensor into the printed holder came with the kit, however, you need to get 2 x 3 mm nuts to mount the bracket into the printer
@brooklynbound75
@brooklynbound75 4 жыл бұрын
@@marcogutierrez9339 Yeah I realized that and had to make a trip to my local hardware store to get them. Basically spent 5 bucks in gas to buy 97 cents in parts that should have been included in the kit. I wish I found the tiny machines kit before ordering this kit. That one includes an aluminum mount that matches the printer and everything you need for the install. Oh well, end result is I now have a bltouch installed. Works great.
@channantha
@channantha 4 жыл бұрын
sadly, i followed instructions as per video and my printer doesnt even level correctly, i obviously did something wrong or i ended up buying the wrong version bltouch.
@mp3llll
@mp3llll 4 жыл бұрын
One meter cable fine or need 2 meter?
@MrWatercooled
@MrWatercooled 4 жыл бұрын
One Meter extension is fine.
@DatFunnyPerson
@DatFunnyPerson 4 жыл бұрын
This does change the z home for me. It's not centered anymore
@Helz777
@Helz777 3 жыл бұрын
Check your tension belts on the gantry.
@mattpass1113
@mattpass1113 5 жыл бұрын
where do u get the jumper from?
@arunsam6565
@arunsam6565 4 жыл бұрын
TOPSHOP
@thomasreisinger9633
@thomasreisinger9633 3 жыл бұрын
I can´t open the files, pls help^^
@bitsurfer0101
@bitsurfer0101 4 жыл бұрын
M3 Bolts should be nuts at 7:12
@robinpolderdijk8570
@robinpolderdijk8570 5 жыл бұрын
Can the support for the BLtouch be printed in pla ?
@JunkieVirus
@JunkieVirus 5 жыл бұрын
yes
@srencalundan4281
@srencalundan4281 4 жыл бұрын
Very nice instruction good job!
@panniechristou9644
@panniechristou9644 5 жыл бұрын
thanks , very good video , helped out a lot
@ibrahimmolero2096
@ibrahimmolero2096 5 жыл бұрын
Hello! Is the BLTOUCH 3.0 version?
@3DPrintingCanada
@3DPrintingCanada 5 жыл бұрын
v3.1 BLTOUCH
@ibrahimmolero2096
@ibrahimmolero2096 5 жыл бұрын
@@3DPrintingCanada Do all these instructions apply to the BLtouch 3.0 or is there something different? Thanks for the detailed tutorial.
@Gasrovescio
@Gasrovescio 5 жыл бұрын
@@ibrahimmolero2096 up
@SimPilot-dl8zy
@SimPilot-dl8zy 4 жыл бұрын
I would have preferred a metal bracket because of the heat.
@SimPilot-dl8zy
@SimPilot-dl8zy 4 жыл бұрын
Ok thanks. Good to know.
@SimPilot-dl8zy
@SimPilot-dl8zy 4 жыл бұрын
Studiolab 39 well , I installed the the BLTouch and it works but neither CURA or SIMPLIFY 3D recognize the printer. The other issue is that it will not home to the center of the plate. I am not a programmer and am not sure what to do. Please if you can help I would appreciate it.
@freaksavior
@freaksavior 4 жыл бұрын
You could just route the cables with the ribbon cable. There's plenty of room if you unscrew the two bolts and put the plate back. kzbin.info/www/bejne/mpaXk2l-j66jhKM
@st0mper121
@st0mper121 4 жыл бұрын
DO NOT USE THIS AS INSTRUCTIONS FOR INSTALL A BLTOUCH ON A CR-10S PRO!!!!! This video is equivalent of someone telling you to put your cell phone in the microwave to charge it. I did all listed in the video followed instructions on the firmware and this video. maybe my bltouch 3.1 is screwed? but when i plug in the firmware from the hex file from creality my bltouch lights up. its not functional but it atlest powers on and shoots out the pin when i install the firmware how 3d printing canada states the bltouch does not even light up
@chrisnjackson
@chrisnjackson 4 жыл бұрын
I think you hit on it.. The instructions are a little out of date. The link provided to purchase the bl touch (in the comment section) now points to a 3.1 BL Touch. The vendor states it is "Compatible with CR-10s Pro when using Marlin 2.0 firmware." The firmware link in the comments points to a 1.9 version of marlin. There are several places to get the 2.0 version. I will post back when i get it working.
@st0mper121
@st0mper121 4 жыл бұрын
@@chrisnjackson I did get mine to work but different connections i lucked out bltouch replaced the 1st one then i used crealitys firmware for cr-10s pro and bltouch and connected white and black wires to the Z+ works perfect connected to the Z+ same jumper placement and same wire switch in the plug just dont use Z- like how they show in video connect it to the Z+ plug
@simon1209
@simon1209 4 жыл бұрын
​@@st0mper121 I don't understand ... you just followed the tutorial and reversed instead of z- you put z +, nothing else?
@simon1209
@simon1209 4 жыл бұрын
How did you do then because its not working for me
@st0mper121
@st0mper121 4 жыл бұрын
@@simon1209 these instructions are out of date. I did get mine to work. Keep in mind this has been a few months So this could be out of date as well. but maybe this can help. some links that helped me might be useful. www.antclabs.com/creality3d-board this was for the version 3.1 bltouch. i cant rem where i got the firmware. I had to tweak the firmware anyway. NOTE: the 3 pin plug wires are swaped red, brown, yellow is the order you can see in the picture on that link i provided
@rOSScOGITANS
@rOSScOGITANS 24 күн бұрын
apart from the slowness, this printer is still at the top in terms of the quality of the parts produced with PLA and PETG, I advise you not to sell it!
@markhall3323
@markhall3323 5 жыл бұрын
Thanks for the video I feel if you have to do all this work then you’ve bought the wrong printer
@_chamorro
@_chamorro 3 жыл бұрын
Muy bien explicado, me funcionó a la perfección.
@3d_dos452
@3d_dos452 3 жыл бұрын
como te funciono si la pagina con el firmware no esta???lo hice completo peor cn firmare LCD de tinymachines y cuando baja el cabezal baja y baja no tiene fin de carrera
@Fabrica3D
@Fabrica3D 4 жыл бұрын
Thanks you very much .
@EnriqueFerrer427
@EnriqueFerrer427 4 жыл бұрын
LOL at "its still a perfectly good sensor".
@MrWatercooled
@MrWatercooled 4 жыл бұрын
Think he forgot it was the CR10S pro V1 he was working with. LMFAO.
@keithkamps77
@keithkamps77 5 жыл бұрын
What happened to the people??????????? This robotic sounding tutorial doesn't do it for me.
@3DPrintingCanada
@3DPrintingCanada 5 жыл бұрын
We are mixing it up. Customers appreciate real tutorials which step them through their issues.
BLtouch for any 3D printer - Comprehensive step by step guide
12:47
Teaching Tech
Рет қаралды 390 М.
Лучшие и худшие 3D принтеры 2024
38:12
K3D tech // Dmitry Sorkin
Рет қаралды 101 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 57 МЛН
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 54 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 21 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 42 МЛН
How to install a BLTouch v2.2 or older on a Creality CR-10s Pro
25:34
3D Printing Canada
Рет қаралды 54 М.
Cr-10S Upgrades Part 4: Better bed leveling with the BLTouch.
17:01
TheFirstLayer
Рет қаралды 77 М.
Is it time for 3D printers to abandon bed springs?
14:07
Teaching Tech
Рет қаралды 305 М.
CR 10S Pro Auto leveling new detail instruction
5:42
Creality After-sale
Рет қаралды 38 М.
Creality CR-10S Pro: BLTouch v3.1 Upgrade
17:13
TechWarp10
Рет қаралды 7 М.
Creality CR10s Pro Z axis and Bed Leveling - Fix layer shifts
21:29
DWIN Auto Leveling Setup
9:20
Tiny Machines 3D
Рет қаралды 60 М.
How to treat Acne💉
00:31
ISSEI / いっせい
Рет қаралды 57 МЛН