How to Install a Can-Am Maverick X3 Shock Therapy Rear Sway Bar

[@johninwv807]

Shouldn’t the bolts to the sway bar upper link be last? This would allow you to ensure that the links were adjusted evenly after the bushing mounts were secure eliminating any play in the bushing mount

[@schaefer26351]

So much knowledge you are sharing . I appreciate you brotha!

[@gorhan89]

Bonjour, je suis français et je n'ai pas bien compris le réglage pour les trous. Quand vous parlez du Trou avant, est-ce le trou le plus prés du châssis, le plus prés des graisseurs ? et donc celui en direction de l'avant du véhicule ?

[@AurelioMaximo]

Tried to order front sway bar month and half and still on back order. ;(

[@ricardolopez2940]

WHAT IS GOING TO HAPPEN TO THE DRIVEABILITY IF I PUT JUST THE REAR SWAY BAR , WHAT IS THE ADVANTAGE AND THE DISADVANTAGE

[@gregoryeddowes2275]

why not make the switching from front to rear hole easier? Quick links

[@ShockTherapyllc]

Gregory Eddowes we have tried to make them quick releases but this typically leads to unnecessary noise and weak points. Thanks for the excellent suggestion!

[@leonelceballos3709]

Will this sway bar move side to side like the oem and make the clunk noise

[@ShockTherapyllc]

It will move side to side a bit but there is no clunk noise. We make those clearances tighter than the stock one.

[@douglasholloway4411]

Please hurry along the 64" front sway bar.

[@mrtosh]

Would a bent sway bar make the vehicle lean to one side?

[@ShockTherapyllc]

Yes, you can get some of our adjustable sway bar links to temporally fix the problem. We always do suggest replacing the bent sway bar!

[@DriftKr6l]

Why is a front sway bar for a 64" maverick x3 not made by you guys, is the stock one adequate on a 64" machine?

[@ShockTherapyllc]

The bar fits but the mounts on the arms are too narrow to work.

[@DriftKr6l]

@@ShockTherapyllc so the sway bar for a 72" machine works on a 64" just need the proper links for the 64" arms?

[@ShockTherapyllc]

@@DriftKr6lsame bar both ways. Frame is the same. There is no link that will work with stock arm mounts. You would have to weld on tabs for the standard links in the kit or any link to work.

[@hudsonshouse4011]

Are the rear links supposed to be longer than the stock ones? The ones I just got are about an inch longer. I want to make sure they are the correct ones before I finish installing them. Thanks

[@ShockTherapyllc]

They should be 7. 3/4” long.

[@hudsonshouse4011]

@@ShockTherapyllc the ones you sent me are 8 3/4. I guess I’ll call on Monday

[@teresaday9427]

Got it! :-)