How To Install a CL350 Center Stand & Swing Arm-Vintage Motorcycle Restoration Project:Part 81

  Рет қаралды 5,622

Keep On Wrenching

Keep On Wrenching

Күн бұрын

Пікірлер: 29
@SinnerSince1962
@SinnerSince1962 2 жыл бұрын
Thanks for letting us watch you put this bad boy back together.
@KeepOnWrenching
@KeepOnWrenching 2 жыл бұрын
Thanks for sitting through it! Lol.
@TulaTom
@TulaTom 4 жыл бұрын
A recommendation for those tackling the reassembly of the swing arm. I tried installing the rubber dust shields on the frame, but didn't have much success installing the swingarm. I found it easier to put the rubber shields on the swingarm, instead of the frame. Line up the swingarm and then push the dust shield boot into place on the frame. If your rubber pieces are really dried out this method probably won't work and you'll crack the rubber pieces. If they are still malleable I think you'll find this an easier way to do it.
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
Thanks, Tula! Glad you got that sorted. Onward!
@TulaTom
@TulaTom 5 жыл бұрын
Good beer choice 👍
@KeepOnWrenching
@KeepOnWrenching 5 жыл бұрын
Thanks, man! It’s good stuff.
@bigal7561
@bigal7561 2 жыл бұрын
small extension socket for driving in the long bolt
@KeepOnWrenching
@KeepOnWrenching 2 жыл бұрын
That’d work!
@jeffmoat6820
@jeffmoat6820 3 жыл бұрын
Hi Brian, at 9:20, you mention about the need to scrap off any paint around that round hole before installing the swing arm. Why is that necessary? (got my frame powder coated recently and I want to save a trip back to the shop to have them sand blast the paint off if it’s not really necessary). Thanks!
@KeepOnWrenching
@KeepOnWrenching 3 жыл бұрын
It’s probably not the end of the world if you don’t but that is a greased area so I assume metal to metal contact is best.
@jeffmoat6820
@jeffmoat6820 3 жыл бұрын
@@KeepOnWrenching Thanks for the speedy reply!
@SinnerSince1962
@SinnerSince1962 2 жыл бұрын
@@jeffmoat6820 If you spread the opening slightly, you don't need to fuss with paint residue.
@davidaldrich3488
@davidaldrich3488 4 жыл бұрын
Brian, The center stand stop........you said you could not find it..........Show its install please, I have ordered one for my 1970 cb350....Ty
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
I need to order a new one. Thank you for the reminder. it just pushes on. I’d suggest lubricating the rubber piece first thing. I can definitely show it but I need the part! Totally forgot about that.
@josephcivita1450
@josephcivita1450 2 жыл бұрын
Use a new cotter pin, they are cheap. Install the rubber snubber on the center stand before you install the stand in the frame. Use a socket or a short piece of tubing to protect the grease fitting when driving the swingarm pivot bolt in.
@KeepOnWrenching
@KeepOnWrenching 2 жыл бұрын
Definitely
@larrywilliams3858
@larrywilliams3858 2 жыл бұрын
I know I am late to this party. Thanks for making the videos. Please, for everyone's sake, put the red Loctite away. I think you would be served well by a 3" extension on that ratchet, and 6 point sockets. The factory did not scrape the paint off of the frame under the rubber dust seal. Keep up the interesting work.
@KeepOnWrenching
@KeepOnWrenching 2 жыл бұрын
I’ve actually acquire many of those things by this time. Glad you found the channel. Getting better everyday!
@VictorPaulDiaz
@VictorPaulDiaz 4 жыл бұрын
Question, my centerstand dosent have a stop welded on. Is there a different one? I have it back on but spring will fall off cause its going too far back without stop
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
Some do and some don’t. I believe my earlier model didn’t have a stop. Go check the cmsnl website for the schematic of the parts based on year. It’s a really amazing resource.
@jeffmoat6820
@jeffmoat6820 4 жыл бұрын
Hi Brian, what did you clean all your parts with?
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
Super Clean degreaser and then into the sandblaster. That was all repainted.
@seanpalmer2050
@seanpalmer2050 4 жыл бұрын
Brian, it's me again. I just rewatched this. I installed a center stand on my 1971 CL350. Someone had removed mine. It's missing the rubber spacer that you referred to. Does that have a part number?
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
I've placed a link in the description of the video with a reference and parts list. Very useful. I hope this helps.
@seanpalmer2050
@seanpalmer2050 4 жыл бұрын
@@KeepOnWrenching thanks for all your help. Your videos are amazing and you seem like a super cool dude. I hope that you are doing pretty well at this time.
@KeepOnWrenching
@KeepOnWrenching 4 жыл бұрын
That’s so nice to hear. Me and the fam are doing well. Strange times. I’m glad I’ve got this project to pass some time. Be safe. Be well.
@bigal7561
@bigal7561 2 жыл бұрын
I'm going to Harbor Freight and buy you a dead blow mallet and a soft face mallet and a brass mallet.
@KeepOnWrenching
@KeepOnWrenching 2 жыл бұрын
Those would be useful. I can procure them tho. Thank you!
@ryancollard77
@ryancollard77 3 жыл бұрын
0k
How To Install A Motorcycle Engine: Part 162
17:57
Keep On Wrenching
Рет қаралды 7 М.
Sand Blast & Prime A Vintage Motorcycle Frame
10:05
Keep On Wrenching
Рет қаралды 25 М.
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
How To Install A Honda CL350 Scrambler Exhaust System: Part 199
26:20
Keep On Wrenching
Рет қаралды 9 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 282 М.
Install Gas Tank & Fuel Lines On A Honda CB350 CL350 Motorcycle
17:26
Keep On Wrenching
Рет қаралды 35 М.
This Chinese Motorcycle Company Has GONE TOO FAR!
13:08
Spite's Corner
Рет қаралды 37 М.
Route & Install Wiring Harness on a Honda CB350 CL350 Motorcycle
13:57
Keep On Wrenching
Рет қаралды 19 М.
Polishing Aluminum at Motopsycho's!
9:08
Motopsycho's Asylum
Рет қаралды 2 М.
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН