How to install a front fan in a desktop computer case PC AeroCool Cylon RGB Mid Tower

[@DOUR08]

I’m so glad you used this case to showcase because I have the same one and I had no idea you could remove the front led thing, save me a lot of stress, thanks a lot❤

[@contagiumnewhampshire3980]

Love it. Building my first rig when my PSU comes in this weekend. This helps!

[@Vlad-co6dd]

I had a problem with a similar case (aerocool streak,the cheaper brother xD) i didnt have any ideo on how i was supposed to mount the fron fans,i got very frustrated,this video helped a lot,i dont usually like video but you deserve it

[@PC_HardwareTechUnboxing_1]

Glad I could help and thank you!

[@PC_HardwareTechUnboxing_1]

Hope this helps you all out...if it does please give it a like! Nevermind what I was saying about the acrylic panel....that was just wrong. lol

[@potentialgaming1673]

bro omg i cannot stress this enough THANK YOU because i was wondering how to screw in the fans on the front

[@flowerface9011]

Thank you for this, just purchased my first custom PC. I heard the airflow of this case isn't the greatest so I wanted to add a couple fans and you explained everything real well. Thanks chief!

[@PC_HardwareTechUnboxing_1]

Thank you for the nice comment

[@andrepartfour]

david thanks so much this is super helpful :) .. I had a feeling that was how you removed the front case but those cables attaching it to the rest of the pc case made me so nervous I didn't want to risk it until I saw this video .. again super helpful :)

[@kevinbino3628]

Ye same here wasnt sure if i was to pop it off xD great video

[@flufy55]

That's why you get a dremel and make some cut outs on the front panel or top and sides easy modes since I work with a lot of rc cars airflow is a must for all electronic parts

[@brendo8421]

Nice content, mate. The audio is pretty good and understandable.

[@sportyalt1281]

This video was a savior I just got done installing 3 fans on the side. Thanks man🙌🙌

[@orange_turtle3412]

I REALLY need help figuring out how to ventilate this. Im going to be running some pretty demanding hardware in this thing and Im kinda scared because of the solid front. Is there anything I can do?

[@moncefarajdal4582]

Thanks man, you explained it really well

[@roxtwilight]

Is it possible to have an 120mm radiator in the middle and two 120mm fans up and down?? Please help

[@ismael5192]

Where is the inoshield of your motherboard???

[@Mybloodyfeb]

Hi, thanks for the tutorial. Is possible to install two 120mm fans on the front panel?

[@hardpeeks]

3 in front 1 top 1 bottom and it comes with a rear one

[@furelkan]

@@hardpeeks top ? i couldn't find where to place the screws

[@Pingord]

@@furelkan On the aeration grid

[@furelkan]

@@Pingord there isn't screws placee

[@MadMax-yo2bf]

Thank you

[@LB157-]

Awesome video

[@NickMineboom]

quick question..doesnt the front panel make it pointels o have front fans since it doesnt have gaps 4 the air to go thru?

[@herukisu]

I think I lost a wire to the case is there 2 sets of wires in the front of the case panel to turn on the led lights if so can you tell me what both those wires are. Thank you

[@samdelaney6383]

Thanks!

[@airidasrom583]

is it ok and is it possible to disconnect all front ? like that only fans are seeing, no front RGB panel, fully disconnected front panel ?

[@TheAHLAM28]

How do I remove the back side i don’t get it???

[@echostorm4419]

i dont either bro

[@CriSpYi]

can you add a three fan water colling ?

[@aryaeris]

How do you take the side panel off I cannot take it of even if I unscrewed it.

[@lesterroman8190]

I need some help, i installed some fans but when i detached the front panel the cable of the front rgb strip came off and idk where it goes

[@pnaekraikrob3879]

Thank you 😋❤️

[@vemomz]

Can i Remove the Front Panel completly ?

[@tunkunrunk]

I bought one of these fans with LED on Ebay , unfortunately the cable that supply power to it melted badly one day , a strong smell of burnt plastic filled my room . I suspected the cable was of low quality. Where to buy less dangerous pc case fan?

[@PC_HardwareTechUnboxing_1]

Your fan did not have a 4 pin and molex connector did it? If so, I hope you did not plug them both in at the same time.

[@kookingwithk4861]

how do i get the dang back panel off i removed the screws but it still wont come off

[@miguelmambrino5006]

Min 2:00 thx

[@marcusadelman2657]

Thank you but how can you install a top fan?

[@LuieDieNadel]

Yes you can

[@regs8251]

if i connected an rgb fan would the rgb switch on the case change the fans color as well?

[@PC_HardwareTechUnboxing_1]

I currently don't have mine with me...my RGB switch died within the first day. That said, I don't believe there is a hub in the RH access panel area..so additional RGB would have to be controlled by motherboard bios or software. If I remember correctly, the RGB was powered by SATA 3 power connector.

[@regs8251]

@@PC_HardwareTechUnboxing_1 would i be able to connect multiple rgb fans

[@PC_HardwareTechUnboxing_1]

There are so many types...some wireless...some you need to know if your motherboard supports.

[@user-gf9oi1cx4g]

I got it never mind I almost dropped my monitor

[@gamingcrewaustria5005]

120mm Fans?

[@siormarsden976]

Ye

[@David-ht6lb]

Thx

[@banrtv]

i like youre accent, where your from?

[@user-gf9oi1cx4g]

For the love of god I cannot remove the back side panel help please I already unscrewed it i don’t understand

[@moncefarajdal4582]

Do you mean the panel of the opposite side of the glass panel?

[@user-gf9oi1cx4g]

MONCEF ARAJDAL yeah man I got already built my pc a week or two ago

[@moncefarajdal4582]

@@user-gf9oi1cx4g So happy you solved the problem. have fun!

[@mabbasflingyou]

same I need help

[@xitsui7799]

How do I put one on the top?

[@PC_HardwareTechUnboxing_1]

I was unable to due to interference with fan housing and CPU power connector. A thinner fan may have worked. That said similar steps to this ..except intake side is facing motherboard...exhaust side blows out. Depending on connector type...either connect to motherboard with 4 pin or use Molex connection off PSU and route inside RH access panel

[@heavyfromtf2208]

What size are the fans

[@DMthefutureme]

120mm

[@heavyfromtf2208]

@@DMthefutureme thanks brother

[@-Wraith]

Where is your up shield?

[@sum_ctain8532]

That’s what I was wondering

[@gamingcrewaustria5005]

The Front won't go off.

[@johnmendez2368]

Can anyone help me to build a gaming pc for $ 140 and ye im rlly poor im trying to do this and can help me get a gaming moniter and a keyboard and mouse wired i need all these things and my buget is $140

[@glaxra3201]

Bro wheres the IO shield 😭😬

[@clouthentai479]

comes with the motherboard you buy, i'd try to buy new

[@infinitestars394]

DO NOT BUY THIS CASE! I bought it and found out it has 3 major problems. 1. Very bad airflow, because there aren't any venting holes on the front panel, so there won't get enough air inside the case. 2. There is almost no space behind the motherboard for cable management! Many PSUS have stiff cables, if that is the case for you, you need to be very careful in managing cables, otherwise you won't be able to close the panel behind the motherboard. 3. Case metal is blocking screws on the backside of the motherboard for CPU cooler mounting! I had to literally cut off a piece of the case to be able to mount my CPU cooler, because the case has a very bad designed opening hole on the backside, where you can normally tighten screws of CPU coolers from back of the motherboard. This is VERY bad design decision! Please, if you allready bought the case, send it back and get a better one for 10-20 dollar more. It is worth the investment.