How to Install a Hitch (2016+ Chevy Spark)

[@xaviergonzalez4800]

I can't believe I was about to give 100 dollars to do this easy installation. Thank you so much!

[@Angry_Munchkin]

Your video is the only one on the net that actually shows close up how the tabs hold the bumper cover on. Bravo! This is so helpful to understand the method of attachment to go forward with the removal. Getting those tabs to release and not damage them is key to a successful removal. Great job!

[@-NewDay-]

Your voice was recalling soothing. I have a 2014 and was wanting to do the installation myself, 32 female.

[@alaskaforest]

I used curved metal snips to trim the fascia on bumper on my 2017 5-speed Spark; (worked better for me than the Dremel) then used a flat hand file to smooth it. Your video helped me do a superior job.

[@ScooterDano]

Nice instructions. Thinking of adding a hitch and cargo carrier to my 17 spark for a little extra storage space when needed. Prying plastic tabs for the first time is always nerve racking.

[@kevinpeterson4098]

I've watched this video 10x already, and it gave me great inspiration to tackle my 2018 spark. I bought the Curt 11433 model. And it bolts to the frame with 6 bolts. They said to enlarge the factory holes but I took the bumper off and had easy access to the factory holes without enlarging anything. Plus those 7mm mud guard screw heads were 9/32 on mine. Thanks again for this video!

[@joesjunkcars6328]

Glad to have inspired you. Sounds like they might have changed a few things in the production of the Spark, maybe. I actually avoided the Curt one because I read the instructions when I was considering purchasing it, and really did not want to do that step. Good information to know!

[@danapeacock7441]

Thank you. I now have the confidence I need to alter my vehicle. :D

[@dalebesaw9699]

That was great. Detailed enough to give you just about anything that you would need to get the job done. But not too wordy.

[@TigerHuskyCreative]

Thank you for making this!

[@thatwasinteresting.8150]

I'll be tackling this soon on my 2015 model to add a hitch-mounted tire carrier for my custom-matching spare rim. It's criminal that Chevrolet doesn't include an actual spare tire with this car but some ridiculous and almost entirely useless "inflator kit." What good is an inflator kit when your tire shreds on the highway? They could have at least included a small donut spare but nooo. For anyone who doesn't want to add a trailer hitch (extra weight) and a hitch-mounted tire carrier (more extra weight) you should be able to just toss out the inflator kit and foam crap in the trunk and put a donut spare in the well made for it but never added. Might need to install some kind of hold-down bracket to keep the tire from bouncing around too. A 2x 12" subwoofer box should also do the trick, lol.

[@fresherthanyobastadchildre8472]

that was dope. appreciate it

[@Detroitblue]

I have the Spark EV. It seems to have an extra tray under the bumpers with air vortex tabs. I haven't got under it for a close look but it seems like it will be different issues.

[@Detroitblue]

@@valleyofiron125 Very interested in your results. I have been reluctant to commit to adding a hitch because I found out adding a hitch voids the factory warrentee, which is 5 years or 60k miles. And even though that 5 years has expired I have an extended warrentee and I don't want a snag if I need to use it. Never the less I have become very committed to driving my Spark for any and every occasion that will allow me to avoid petrol. A hitch would really add options for that. So I really have to collect information for one thing. But the other factor is to know for a fact you can add a hitch.

[@zb673]

What did you attach to the hitch once it was installed? how much did it/can you think it can tow. Very nice cideo, simple and thorough instructions!

[@joesjunkcars6328]

Thanks! I have a small flatbed trailer I tow with it, about 5'x4'. I will have a video coming out on it in the next few weeks. I actually used it today to take 360 lbs of scrap metal to the junkyard. I use my Spark like a small truck, haha!

[@zb673]

How well does it pull? I have a spark too! and want to pull junk around haha. ;P

[@joesjunkcars6328]

It pulls good, just takes a little longer to get up to speed and stop of course. I probably wouldn't tow much more the 500 lbs, my trailer alone weighs 150. I have a manual transmission so I can downshift on hills to maintain my speed and it does fine. I can't speak to how the automatic transmission will handle it.

[@alaskaforest]

On the receiver, used a Curt 45024 Class 1 Ball Mount with 5" Rise. It has 2,000 pound towing capacity.

[@brendadavis6360]

I was told i couldn't tow anything with my Chevy Spark.But come to find out they were wrong yipee

[@brendadavis6360]

I owe Tony & Carfinco an apology. SORRY GUYS

[@juanpabloenriquezmartinez5133]

Hi!. The same hitch can be used on a 2013 chevy spark? and in the same way??

[@MiguelPerez-tl7gy]

Is that same type of hitch compatible for a 2020 Chevy Spark?

[@xaviergonzalez4800]

Yes, when I ordered it but this hitch type is discontinued and there is one that goes underneath it. Check your uhaul location for this type of hitch, I bought mine for 114. dollars.

[@orlandoreina1983]

And the price of this is now $154. 79. Wow... Thank you Inflation!! 😁😁

[@noahtopolinski9976]

does your car have a cvt or manual transmission?

[@joesjunkcars6328]

Manual

[@andrewrodriguez8566]

Where did you get your mudflaps?!

[@joesjunkcars6328]

www.amazon.com/Rally-Armor-MF12-BAS-RD-Universal-Hardware/dp/B017L0841I/ref=sr_1_7?s=instant-video&ie=UTF8&qid=1547471235&sr=8-7&keywords=mud+flaps

[@89TNash]

Is there any roof rack installation for Chevy spark?

[@joesjunkcars6328]

Sure if you buy me one, haha! But seriously if I ever put one on I'll make a video like this for it.

[@89TNash]

Joe's Junk Cars deal haha jk. Yeah sounds good. I looked on that website you posted and they have some for this car but I think they might be suction cups or something strange like that. Looked shady to me. I might see my stuff on the rod behind me from the looks of it haha. Thank you for the video though, this is great help. I ordered me one and I am going to try an attempt. Fingers crossed 🤞, hope I don’t screw up my bumper to much. Looks like only hard part is cutting the small opening.

[@joesjunkcars6328]

@@89TNash If you cut that notch with a pair of tin snips it would probably work better. The instructions say to use a knife. Also, remember to measure twice and cut once, and don't cut yourself.