How To Install A Lowering Link Honda CRF 300 L step-by-step Install Guide

In this one I install alluring link onto the Honda CRF 300 L if you have any questions leave them in the car is below thank you for watching.

[@marsoelflaco5722]

A little know-how, the right tools, and the magic of video editing, makes all the difference.😉

[@Maxsmotoshop]

👍

[@stevepope5484]

Were you Obama,s voice coach? You'll have to add /UH between several uh words. Great video!

[@eldonhongo6095]

Great demonstration. What is the altered fork measurement in relation to the lowered rear? Different makes of bikes will have different geometry/rake so the relative measured formula will be different as well. Thanks for any correspondence.

[@Sapphireblack1]

Never showed how much lower it was 😢

[@thankyou7491]

I think you can lower the front by 1 inch. Did you lower it or left it? Thanks for the video!

[@rosarioroberto5823]

Greetings Max, As always another brilliant detailed video 🇺🇸🍾🎉🇺🇸 Did the lower link affect the ground clearance? Thank you so much for assisting me Keep producing more videos

[@Maxsmotoshop]

Thanks for the support and yes, as you lower the bike, you lose ground clearance

[@leesilas]

I wish you would have done a free measurement at the bike in like three different places. And then do a post measurement of how much the bike actually dropped.

[@donwatkins9769]

I agree. Would like to see the difference!

[@billwhite9701]

Nice video thanks

[@stevepope5484]

I thought the forks were supposed to be slid up the same amount the rear gets lowered? If I ever ride mine/I gotta replace the seat with an old Sportster seat or even a solo seat. I'm not paying 340.00 for a 50.00 seat.

[@JakiaAkter-yn1qi]

Hey man! Love your vedios.. Is there any cons of lowering link in rally?

[@Maxsmotoshop]

Less ground clearance that’s about it

[@hal511bm]

Thank you .

[@ClaudioRichiardone]

Sehr interessant. Können Sie mir sagen, wo Zeta-Produkte in Europa zu finden sind? Vielen Dank! / Very interesting. Can you tell me where Zeta products can be found in Europe? Thank you!

[@mt1885]

What is the link to the kick stand stand how far down and you drop the forks in MM?

[@Maxsmotoshop]

I believe I showed the company the parts came from at the beginning of the video

[@bombidude]

Did you have bring the forks up in the front too? To keep the bike somewhat level?

[@Maxsmotoshop]

Yes

[@mattingray5651]

Shouldn't you also drop the front forks to keep everything proportional?

[@MRALEX9870]

never lower the front of a bike

[@wrongshrub2759]

@@MRALEX9870wrong

[@gmodesike]

Could you lower it by 3 inches at least as per the Soupy's item description?

[@Maxsmotoshop]

Yes

[@panchampatel1]

How many inches did you lower it?

[@Maxsmotoshop]

I’m not exactly sure I think it was one or 1 1/2 inches but it is adjustable and can go down a little farther.

[@docjoebie]

@@Maxsmotoshop do you think you lower the rear to about 3 inches? How much you can lower the front forks?

[@gmodesike]

@@docjoebie you can get handlebar risers to lower the front more too.

[@AntonioAugusto1010]

Forgot to adjust the chain

[@clvrswine]

After installing the Koubalink, my chain was still in spec at 50-55 mm.

[@clvrswine]

I used some Blue LocTite on this comment.

[@Maxsmotoshop]

👍

[@clvrswine]

@@Maxsmotoshop Man, I can't break that 17 mm bolt to get started. Wrench keeps sliding off. It's super tight.

[@Maxsmotoshop]

@@clvrswine try a six point socket

[@clvrswine]

@@Maxsmotoshop Thanks man! I did exactly that! $7 solution, but not before I shredded my forearm on the chain. I used my right foot on the other wrench to keep the 14 mm side from spinning. I torqued the lower bolts to spec, but could not fit the torque wrench to the top ones. I am really happy with the height now. Lowered the forks after a few days.