How to Install a Magura HYMEC clutch on 2021 YZ125X

[@daddister7471]

Thank you for sharing this. I'm loving my 125X but feel it's time to address the clutch fade issue when riding in technical sections. I was blown away by how well the bike handles slow technical riding though. Also considering going with 13/52 gearing to make 2nd and 3rd gear a little more useable and make it easier to ride a gear higher for better control.

[@chadrides914]

Good timing on this video. I’m really interested in one of these units as we’ve gotten into a lot is super slow hard enduro type stuff and I’m clutching my brains out.

[@noahpollard1523]

That bike is sweet im getting one this spring.

[@lgroves336]

The model nbr you hare for the FLO is for KTM. Lucky it worked for you.

[@ryanshout8652]

nice walkthrough, thanks for posting. Can you please post which lever you put on?

[@innerfire-graham9016]

What do you think of the 125x ? I'd like to hear what you think about it after riding it for a bit now. I've got one on order for January. Great video and content, thanks!!

[@woodrumracingvlogs]

I’ve got a couple of my races on the channel where I talk more in depth about the bike. I love it. I thought maybe I would get bored with it but the more you ride a 125 the more comfortable you get on one. It’s great

[@jasonjaeger4042]

Lmao, I put a Hymec system on my '21 YZ250 this winter. Got a "shorty" lever, a Hammerhead anodized resevoir cap, love the Magura's. But put a new top end on today...finally, fired the bike up......and the clutch wasn't compressing enough. So I snapped....and realized 5 min layer that I had put the wrong spacer on. Whoops.

[@comtzu50]

Hi there!! Nice video. Can you tell us what part number you got? I have a Yz250x I would like to upgrade to but not sure what part I need.

[@woodrumracingvlogs]

Yes. WPS part number 17-9603

[@michaelmurphy6869]

What's the Magura part number? If you have it.

[@tandccreations6383]

Where did you find this clutch system at? I've been looking everywhere for one for my 23 125x and I can't find one

[@woodrumracingvlogs]

This was a 2021. I think they made changes to the 23 and I'm not 100% sure magura put any focus on building one for that bike yet. sorry, I wish I had better info.

[@ethandemrovsky6439]

I bought this hydro clutch kit and lever after i saw this video. How did you mount the lever with the correct plunger for it all to work. i couldn't see very clearly in the video how you did it.

[@woodrumracingvlogs]

Sorry, I just saw this. I used a Flo lever. I used their application chart for a 14-22 Husky. WPS part number 122-0727. Hope this helps!

[@ethandemrovsky6439]

@@woodrumracingvlogs okay I got the same one, now I couldn’t see in the video, did you modify your clutch perch? Because it looks like it’s not a direct fit

[@comtzu50]

Thank you bro!

[@randirippy4987]

When is part 2 of the kx100 build coming out

[@woodrumracingvlogs]

We are still waiting on a few parts to come in and the graphics to come back. We're guessing it's going to be a few more weeks. Sorry

[@Gavran2702]

Hi. Does anyone know if PRO TAPER XPS is compatible with HYMEC?

[@robertmuir734]

Did you find the throw on the actuator arm to be a bit less than with the cable?

[@woodrumracingvlogs]

I haven't noticed that.

[@sethwilz7626]

@@woodrumracingvlogs When you hooked the actuator arm up to the hymec rod, did the actuator arm pull the rod down? When I hooked the actuator arm up to my hymec set up on my yz 250 the hymec rod didn’t have any tension on it from the actuator arm so I couldn’t pull in my clutch at all it was like a brick wall

[@kiarancooper8640]

Hymec clutch link?

[@davidscottbeck4492]

What brand lever did you put on?

[@woodrumracingvlogs]

Flo Motorsports. Part number 122-0727 $69.95. Have not been able to break one yet

[@FlywireAXO]

What is the specifacations on the kit you got I don't know what size kit to get.

[@woodrumracingvlogs]

It's been a minute since I did this. I think I commented the part number at one point. Let me check.

[@ctk166x2]

Why in gods name would you put a mikuni on a YZ

[@woodrumracingvlogs]

Are you referring to the Mikuni carb that came on the bike stock or did you think I put that on there?

[@ctk166x2]

@@woodrumracingvlogs ah well it was to my knowledge yz’s came with Keihin carbs

[@ctk166x2]

@@woodrumracingvlogs geuss you learn something new everyday

[@woodrumracingvlogs]

Hahah. Haven’t really had any issues with the Mikuni. We came off of KX’s with Keihin’s and I didn’t really have many issues with those either.