Appreciate you making this video. I'm handing off an older motherboard to a friend who will be installing in a new case and the video you have made is perfect for him.
@ECPUz Жыл бұрын
glad i could help!
@Breaker1966 Жыл бұрын
@@ECPUzis a ⁴of q
@Sminimal21 күн бұрын
This needs a trillion views. So incredibly simple and well done for beginners.
@0KarlAdrian0 Жыл бұрын
I like how you separate videos for pc building. This is a great help for us 1st time pc builders
@PhaIIanxx8 ай бұрын
I will begin assembling my first build ever in a few days. Videos like this encourage me I can do this. Thank you for the effort of this video
@wholelottagangshid8 ай бұрын
Hey man, did you get your build going? I'm starting my first ever build soon aswell
@PhaIIanxx8 ай бұрын
@@wholelottagangshid hey! Couldnt start yet as Im still waiting for the MB…
@JustLootShorts4 ай бұрын
@@PhaIIanxx howd it go?
@CivicYt11 ай бұрын
Very good information. I don't like when most youtubers build a pc but never show when they are screwing in the motherboard into the case.
@silfrido1768 Жыл бұрын
This is hard to understand if you have an io shield on the board already. idk how to angle the board in to get the io shields in first
@jayhoochiemagee8487 Жыл бұрын
did you get it
@silfrido176811 ай бұрын
@@jayhoochiemagee8487 yea thankfully I got it. my confusion was with the pre installed io shield & why it didn’t want to clip on the side when seating it within the case. Then I realized it’s dependant on the case you buy. so all I had to do was angle the mobo on the standoffs correctly while making sure the io shield slot looked good visually. Piece of cake
@batmnin11 ай бұрын
i know this is a little late but angle the io shield down to the table flipping the pc case on its back and then you can easily put the motherboard into the io shield
@aidanjames1389 ай бұрын
@@batmnin Tried that and it still didn't work. I have a Gigabyte Z790 Aorus Elite AX, and even the sides of the I/O shield prevent the board from being lined up and sitting flush with the standoffs. It was impossible to get it in and screw it down.
@elow33989 ай бұрын
@@aidanjames138 So how did you get it on? Because I'm having the same problem
@BladenPotter21 күн бұрын
Yo thanks so much for the video. Its pretty obvious to see what wires go where, minus the led and power, but this video helped clarify which cord would do what!
@mikielalawrence504118 күн бұрын
Thank you for this video. Building a gaming PC today for the first time and wanted to get tips.
@sludgebucket30427 ай бұрын
Wish I had this easy to follow video when I did my PC build 5 years ago.. and also when I did my previous build 10 years ago.. and also when I did my build before that 15 years agooo :D
@acidwizard6528Ай бұрын
Thanks for the informative to the point video. Working on my second build ever and it's been 5 years since my first. I definitely needed a refresher on those pesky front panel connectors.
@bonbonizer5 ай бұрын
Great video, I can share with friends and family who need helping hands in trying to sort their motherboards
@gymnasmenoi_skiouroi6 ай бұрын
Easy to follow guide!!! Thanks bro😁😁😁😁😁
@Tesseus Жыл бұрын
Awesome, very informative!
@ECPUz Жыл бұрын
Thanks!
@RichHoliday89049 ай бұрын
all these views and less than 1k likes...yall petty af. give the man a thumbs up . hes informative and got to the point and didnt make any corny ass jokes which is my fav part about the video.
@ChrisGomez-vq4mdАй бұрын
I didn't know Max Halloway was into PC's... Lmaooo nice vid G!
@ECPUzАй бұрын
I know the muscles are the same, but other than that I don't see the resemblance 🤣
@Awesome-10016 ай бұрын
Where are the usb cables and all the minor cable go to? Sorry for the question ive just seen the insertion of them to the mobo but idk where they come from in the case. I have replaced every component on my pc but never a mobo seems kind of scary to do.
@Rookblunder6 ай бұрын
Those first USB cables are attached on the case.
@Awesome-10014 ай бұрын
Answering myself for all the future people that might wonder about this. (Finished building my pc) The the usbs, audio, start button, and restart. Aka front panel. Are wires youll have in your case. Once the motherboard is installed you can fit those in their place. Usually usb 3.0 cant be mistaken with another connection. Nor does usb type c Audio will be at the left down side of the mobo in most cases. And as for the start and restart buttons. You will need your mobos manual. You should have 2 rows of pins mostly found in the right down corner. The power button and restart will mostly be inserted horizontally. But be aware each pin has a different size and different use. Which means the only one right way to connect them. Refer to manual. You should have a drawing of the pins with each of them labeled. For example for the power button look for. Pwr + , Pwr -. Make sure the polarity is right when you insert. If you can't find it on your connector. Just try 1 and flip it if it doesn't work. And no. You dont need surgeon hands for this xd Front panel done. Gratz
@S4m4ntha_9997 ай бұрын
Thank you i will build my first pc soon
@mistraelify11 ай бұрын
In my entire lifetime i never put the motherboard while the case is standing up. I always put down the case horizontally then put the motherboard from above. Is there any benefit doing it vertically ?
@Kevin-vh6nn8 күн бұрын
this is one of the most frustrating aspects for pc game builders. almost everything else is far more easy and almost repetition once you have already done it. most of these mobos are different, not by much, but always read your manuals and watch vids before you buy/install. i highly recommend you install 5-8 fans in your pc, make sure you read your mobo and its either 3 or 4 pins for the connections. i dont like too much RGB, im not 13. please get a GPU bracket if your GPU is heavy, almost almost all GPU in the last 3 years are heavy, too much weight will damage your mobo, etc. great vid
@raziel50086 ай бұрын
Great video but u forgot in front audio and speaker connector
@tylerr819210 ай бұрын
Where can I find a adapter for standoffs
@BMWE304Life Жыл бұрын
I have a z790 asus tuf gaming MB and cant figure out how to properly get the i/o shield off the MB first. Any help is appreciated.
@mariosx7475 Жыл бұрын
If it’s already installed in the motherboard you cannot take it off, just angle it and put it in the case. That step is only required for motherboards that don’t come with preinstalled IO shields (usually cheaper ones)
@elow33989 ай бұрын
Then how do we have the motherboard that comes with the IO shield, how do we make the motherboards sit properly flush over the standoff mounting holes? Because they don't align straight for me because the IO shield pushes away from the back of the case
@karanveersingh73463 ай бұрын
Is it okay to head a clicking sound when connecting usb of cabinet to motherboard? I think I broke the pins
@rsambhuvlogs Жыл бұрын
Good stuff. Very useful.
@Nsanityy_66x8 ай бұрын
I have the asus b760 motherboard on my Lian li dynamic mini case and my motherboard is like hanging off?…..
@If_Shes_9_Shes_Mine2 ай бұрын
What are the prongs for on my I/O shield, can I cut them off or am I supposed to bend them
@highpriestofseti4 ай бұрын
my problem is, it seems my mobo is a few mm, of the standoffs, and the IO shield fits in the case.
@Skfhrhwjdisushdh Жыл бұрын
Thank you!
@pr6cet2862 ай бұрын
good explanations you made it not sound hard for me
@Mrcrashoutyt3 ай бұрын
What should I do
@Betonoszlop3 ай бұрын
Seek for a technician
@Parkybob119 ай бұрын
How do i put my board in if theres alrady an io shield
@Meagler Жыл бұрын
4:33 I genuinely can't find a place to insert this cable on my motherboard. I have a B550 gaming gen3 motherboard from MSI and my case is the Corsair 4000d airflow RGB. Can anyone help me?
@scyllajk275710 ай бұрын
Chances are your motherboard doesnt have it, read the manual and check.
@moborisent7196 Жыл бұрын
How can i check what type of motherboards can fit into my pc case?
@mistraelify11 ай бұрын
The form factor of your motherboards have different names which refer in sizes. The most usual ones are ATX, Micro ATX, Mini-ITX which uses 4~9 stand-offs in the case. The most efficient way to check, is checking how many stand-offs you have in your case and the actual form factor your motherboard is. There are plenty of pictures explaining that on google.
@thatmazdaa3 Жыл бұрын
Very helpful
@akiraliftsyt Жыл бұрын
Which side of these case do you install the motherboard on? It would be nice cuz I’m stuck now cuz of that
@HaidenBelanger Жыл бұрын
My motherboard did not come with any screws to mount it to my case, i have an ASUS board, what do i do
@dannytrashcan Жыл бұрын
Me too
@chinnuselva Жыл бұрын
if it didnt come with any, google the screws u need for the specific make and buy them
@JJFlores197 Жыл бұрын
The screws don't come with the motherboard, but rather the PC case. A lot of people seem to not thoroughly check their PC cases and most manufacturers include a small box/bag with accessories like mounting screws and brackets.
@HaidenBelanger Жыл бұрын
@@JJFlores197 welp, too late now, my case's orignial packing and everything inside it is long gone
@AlexanderCiricАй бұрын
I have the same problem i don't know
@jerrodpettway-ds4xq7 ай бұрын
Thanks
@juliantaylor9659 Жыл бұрын
thanks man 🤑
@CarlotobiasMiggiano12 күн бұрын
I have no screws for the moyher board
@diabeticlife395322 күн бұрын
Where are the memory positions?
@ghosty7756 ай бұрын
This sucks because my io shield has metal sticking out of it so I can’t even nut in my motherboard
@griveter7777 Жыл бұрын
Классно, только жаль что я не очень хорошо понимаю английский..