How To Install A Motorcycle Chain: Part 194

[@execdd17]

I'm in the process of buying a 73 cb350 and your restoration series is absolutely awesome. Thanks for taking the time to chronicle your amazing journey!

[@KeepOnWrenching]

My pleasure, man! Glad you find the series helpful. Good luck with the restoration. go get it!

[@bigal7561]

Just finished setting the chain sag and torqued down the axle. Just another HOW TOO video of yours that I used and it worked perfectly. I know this is not the most difficult part of a rebuild but this is just an example of using your vids as a step by step and get it shop perfect. Finished with all the new cables and hoses. Tomorrow I'll polish the clutch cover and install. Also adjust the clutch. The I'll polish down the header pipes (get the rust off and shine up) and install them with my new mufflers. That with a lot of your vids. Thanks. I'll be done in no more than two days, maybe tomorrow.

[@KeepOnWrenching]

Keep after it! You’re getting so close!

[@daveco1270]

Good stuff. I always put a second wrench on the adjuster bolt when I'm tightening the lock nut. You could see the adjuster turn a little when you tightened the left side lock nut. 14:15

[@KeepOnWrenching]

Valid. Thank you.

[@TheScottiem303]

If you use a zip tie you can connect the chain to hold it in place while you put the master on. Like having four hands.

[@KeepOnWrenching]

Oh! That’s a great tip. Thanks, man. I’ll remember that one. :)

[@bigal7561]

Outstanding

[@KeepOnWrenching]

Thanks, buddy!

[@lcra7716]

Thanks!

[@KeepOnWrenching]

No problem!

[@danielbardan5697]

We are just about at the same stage with our restorations.

[@KeepOnWrenching]

Oh nice! What you working on?

[@danielbardan5697]

69 cb350. Just about done but I’ll need lockdown to finish before I can register it.

[@bucktownpsd1590]

Crescent wrench is a name brand. It’s like saying Kleenex for tissues.

[@KeepOnWrenching]

Ahhhhh! THANK YOU!

[@lescorox]

Hey Bri....where did you get your chain?

[@KeepOnWrenching]

CMC. Their site makes it easy to get the right link count.

[@Lordywithus]

How do I install the front sprocket

[@KeepOnWrenching]

Two hardened bolts. Do you have a manual?

[@Lordywithus]

@@KeepOnWrenching yeah I downloaded it and figured it out pretty quick. Thanks for the reply

[@KeepOnWrenching]

@Lordywithus awesome. They are a pain in ass but a good manual helps so much. Good luck on your restoration. Ride safe when the time comes.

[@Lordywithus]

@@KeepOnWrenching thank you 🙏

[@mikestewart5122]

Can we say put the lighter down and back away from the table DAM

[@KeepOnWrenching]

What are you talking about? Lol