How To Install A Mustang Sway Bar

[@basilbrown25]

“Most importantly, safety glasses.” *doesnt wear safety glassss*

[@Silvermanshehadi]

lmao!!!

[@misterfeagall1120]

Is there anyway u guys can make a video on how to install a rear sway bar w/ two muffler on a 65-70 mustang?

[@mikalb.5212]

Thank you for this video while using common hand tools. I don't have access to a lift, so can this be done while the front of the car is driven up on-ramps?

[@dennispetersen511]

Yes (as long as you're doing work that doesn't require the wheels to be removed). You can use jackstands if you can't use ramps. I did an entire front-end suspension rebuild on my '67 with the car on jackstands.

[@bigskop]

5:55 he rounds off the nut 😂

[@TheMiltonroad]

Yep 🤣 should of took the extension off it

[@mrthunder8190]

Will those exact "Grab-a -Trak " sway bars work on a '65 Falcon Sprint? Or is there a different part number for that application? Thanks - good instructional video.

[@BOSShelby302]

I installed a 1.25 inch sway bar in the front of my '67 mustang, but the end links don't look right and the sway bar is touching the control arms, i got the kit as a set for a 1967 from belltech, but it doesn't seem right. Any advice?

[@psiewert83]

I desperately wanted to buy a set of grab-a-track springs, and a sway bar from you guys but it was honestly too frustrating to hear..."we don't have any of this in stock and no clue when it will be available". I waited a month before canceling the order and there were still no updates. Is your supplier not being forthcoming with you about lead times or are you intentionally trying to minimize inventory right now?

[@jeogriffith]

What kind of lubricant is used for bushings??????

[@newfie-dean5803]

You should use marine grease.

[@santosaleman7060]

Is this the same process for a 2004 mustang v6?

[@umangu]

I highly doubt it

[@mustangsplus]

@ Raehs Puetz I am not familiar with Belltech sway bars. It might be might be an issue with their bar. Email me some pictures [e-mail] let me see if I can identify the problem.

[@MrThabest101]

Is that on 2015-2017 mustangs ?

[@samarce403]

lmao

[@hollywoodgarry6801]

shway bar xD

[@VGMStudios33]

Most importantly safety goggles....doesnt even use them.

[@Nick6Michael]

+VGMStudios33 He uses safety glasses you stupid fuck.

[@VGMStudios33]

+Nick6Michael whatever you ignorant american

[@65Coasty]

@@Nick6Michael hey fuckwit. He doesn't put them on until the 2 minute mark