How To Install a New Integrated Washing Machine

[@UTILITARIANTVUK]

If you would like to support the channel, please consider using the *'Super Thanks'* button below the video. Any donation made is greatly appreciated and will be reinvested into the channel. I would also like to express my utmost gratitude to all those who have already donated. 🍀

[@WhiteError37]

Just had one delivered from AO, paid for recycle and installation. They did everything and spotted the new one was badly damaged so credit to them very friendly and professional

[@Mooslay]

Great tip with drawing the line across the top of the door! I was racking my brain figuring out how to position the door! Thanks bro!

[@UTILITARIANTVUK]

Glad it helped!

[@Rudolfolicious]

Spent lots of time trying to find a good video for installing an integrated washing machine. The instructions with the washing machines are very vague and unclear. Loved how you explained how to use the template after measuring the top of the unit to the washing machine. Thanks a lot for the video! You earned a subscriber.

[@UTILITARIANTVUK]

Thanks, glad it helped.

[@anthonywilson4873]

When connecting extension waste pipes I use a little silicon sealer on the fitting plastic fitting, I have found small leaks before as the jubilee clip does not conform 100% to the fitting. The waste pipe should be the right side of a U bend or have a check valve so that drains smells cannot drift back. Thanks for a good presentation on the the remove and install. I have had to move hinges on the door before and the holes overlapped the old ones, I used car body filler as it it goes of hard pretty quick filled the old holes then recut the overlapping new holes. A little white paint on the filler and the jobs a good one, you can rub the filler down. That bad smell is the drains drifting up into the house, that is what the S bend stops. You could fit on on the end of the pipe and have vertical up-stand to put the waste pipe in.

[@DB-kv5mb]

Glad I found this video today couldn't figure out how to use template, thank you

[@ganeshraoma]

Simply great demo , Nice and simple and anyone can do like demo. Thanks a ton sir.

[@alisonanthony1228]

Great video. I'm intending to fit a washing machine where my dishwasher currently is and have been too nervous to do it, but you've given me the confidence to have a go. Thanks

[@UTILITARIANTVUK]

Hope it goes well. 👍

[@jackpaulpennington7168]

Good video mate always helpful to save paying someone to do the job for you 👍

[@princxssraffy9797]

This is a great video, very well explained and I love the step by step follow up with vidoes. Very confident in installing my new washer dryer this weekend 👍🏼thanks

[@harrywright2831]

THANK YOU, I've got the confidence to fit mine now 😎

[@rob12841]

I had exactly the same old machine but branded as lamona for a Howdens kitchen. I've just ordered the same new machine as you to replace it so thankfully no messing about with doors. Dishwasher was the same, lamona brand but replaced with a beko and door was perfect. Oven was lamona and was replaced with.. you guessed it! Last appliance to give up will be the fridge freezer. It's a lamona so you know what I'll be replacing it with! Dreading that one though I have to say.

[@amaadmunir6478]

Do you remember what happened to the lamona? Mine might be packed up

[@harrybond9282]

HONESTLEY YOU DID VERY GOOD VIDEO. LOTS OF THINGS LEARNED FROM THIS VIDEO. VERY SIMPLY YOU EXPLAINED WITHOUT ANY JARGON. GREATLEY APPRECIATED THIS. WILL SUBSCRIBE NOW.😀😀❤💯👌

[@UTILITARIANTVUK]

Glad it was helpful!

[@michaelhomer5155]

Thought you would have treated the black mould

[@matt9223]

Your video really helped. Save me some £££ on installation. Thank you 😁

[@jen5284]

Brilliant video thank you 🎉

[@spikeybaby1735]

One word, succinct, 👍

[@Hwash500-t18]

I’ve got the same brand washing machine freestanding got it few months ago brand new it’s decent but not the best takes a really long time too haha

[@user-kr6tl9kr1v]

Are all beko integrated washing machine door hinges mounted in the same place ?

[@myrahouse2368]

I had my washing machine years ago for 15yrs. Stuff wasn’t disposable bk then.

[@RanTausi]

Good luck with the new washing machine ! hope it get the job done❤. It seems you have got some water leak there 😞

[@UTILITARIANTVUK]

All good and no more leaks. 👍

[@JaneyMay-yt5xe]

I need to order a new integrated machine to be fitted by the supplier as I can't do it myself - how do I know if the hinges will fit the existing holes if I haven't seen it? It's causing me a real headache, I've been without a washing machine for 4 months because I don't know whether to fill current holes just in case, buy a new door or pray it takes the same fittings. I just can't find an answer!

[@craigusmaximus1989]

Thank you! How did you put the kick boards/plinths on? Did you have to attach anything to it? I’ve got my washer in place just want to hide the bottom bit! Thanks!

[@UTILITARIANTVUK]

I placed white L brackets either side.

[@georgiagilmour8623]

Great video I've got a new washer coming next week and this video has given me confidence to be able to fit it myself 💪🙏 could you please tell me which tools you use? I don't have many tools and you made it look quick and easy with what you used 😊 thanks!

[@UTILITARIANTVUK]

Without knowing how your washing machine is plumbed in, it's hard to tell. But, always best to have a couple of screwdrivers, Phillips/flat head and maybe some water pump pliers.

[@debbiemcgarrity4716]

Hi mate can you help me out is there a housing carcass for this traditionally for the What is supporting the hinge !

[@UTILITARIANTVUK]

No carcass that I know of. It just goes under the work surface. Hinges are attached to the body of the washing machine.

[@johnmccready8377]

What if the old hinges don't line up though ?

[@UTILITARIANTVUK]

You'd need to drill new holes using something like this amzn.to/4dEkFn5

[@gadarahmed5298]

How do you push the washing machine in with the rubber stands with not enough space to lift it up? I cannot budge mine in

[@UTILITARIANTVUK]

I had to push it with my hip, one side at a time.

[@dilldow-pc5ij]

Hi my boiler bangs if it gets to temperature and turns the central heating off but if I turn the thermostat off on the wall the boiler doesn’t bang please help

[@UTILITARIANTVUK]

What's your boiler thermostat set to?

[@Laundrylad2010]

Question what broke on your old one?

[@UTILITARIANTVUK]

It was over 10 years old. The door lock was faulty, the wash cycles would jump up to 90 degrees, sometimes it wouldn't spin, there was a smell of burning coming from it, every now and then it would leak over the floor.

[@Laundrylad2010]

@@UTILITARIANTVUK ok well it really was broken then but i was asking because it was still really clean by the way i have subscribed:)

[@UTILITARIANTVUK]

@@Laundrylad2010 yeah I gave it a good clean, filter, draw, descaled etc to see if it would alleviate some of the issues, but it did not. ☹️

[@Laundrylad2010]

@@UTILITARIANTVUK ok well i hope this is one will last last and i watched some more of of your videos and i love them

[@tonyhall8947]

Good Vid man, but you need to get sum proper screw drivers, that thing you use looks annoying.🤔

[@UTILITARIANTVUK]

I love that screwdriver! 🤣

[@tonyhall8947]

@@UTILITARIANTVUK lol

[@HishamX]

Great vid :)