How to Install a Replacement Hoverboard Battery in Less than 4 Minutes!

[@syl9059]

You just saved me, my daughters hoverboard dies every couple of minutes and I think the battery has died, so with your instructions it'll make it easy to do the work! Keep up the great work!!!

[@ZEEDSTUN34]

bro thank you so much i haven't rode my hoverboard in 2 years man i just saved 150 bucks

[@Nickbaldeagle02]

Haven't ridden

[@jkoz292]

Do the same size batteries come in higher higher amp hours. Looking for the best range for the same style size hoverboard in video. Thank you for any advice!

[@joic81]

My kids have different hover boards are the battery all the same?

[@mangodoesdoodles]

What type of battery is it?

[@bbbb-mz2fj]

how much is the battery and where can i buy,plsssz

[@sirpuff2757]

it said in the desc. (im hella late)

[@eiadhani6770]

On amazon

[@badboytilltheend13]

$100 for the battery? Just buy new hoover board

[@bigted1953]

I have one of these boards. I hooked it up to an early apple computer. I followed the instructions here and was transported back to 1981. I saw steve jobs, and he told me to buy stock in google. Now im able to say whose comments get removed. Lots of stock , lots of power.

[@_AirWolf_]

bruh what lmao

[@florentin4061]

This pandemic is getting the people crazy

[@nebbaoe4029]

What board is it?

[@bigted1953]

@@nebbaoe4029 all the boards are gone, and the sky is gray-ive been for a walk, on a winters day..... ..

[@lilgsq]

Is there a chance u sell that bracket that hold the battery in?

[@karterjoseph1300]

My grandson batteries 🔋 was glued took more than 4 minutes but thanks for the content.

[@micahmiller8769]

I need to find a cheap replacement battery where do you get them

[@Nickbaldeagle02]

Ali Express

[@Meepmeepseatbeltseveryone]

Hi will 36 volt work with a 24 volt hover board since I can’t find a 24 volt one

[@hardusvd]

My brand new hoverboard run time is around 25 minutes then it cut off power of board. At full charge it was around 41.5 V and after 25 minutes the battery voltage was only 37.8 V for cut off. Why is the voltage still so high and already there was a cut off the power? At wat voltage should the board switch off? Any suggestions?

[@giuliajose7390]

Buongiorno. Ho un hoverboard con manubrio che non viene utilizzato da anni, usato nel 2017 e occasionalmente nel 2021. Volevo sapere se la batteria potrebbe perdere sostanze chimiche e fuoriuscire dall'hoverboard. È pericoloso anche se l'hoverboard è spento? Grazie.

[@dustinplee5067]

Does very hover board battery have the yellow connector and the black connector and I looked on eBay and I only see yellow connector in the picture on eBay but does it have a black Connector and does it matter what battery voltage I get for my SWAGTRON T5 580

[@defjef333]

Thank you! Switched batteries all good! My old battery was glued though so took more than 4 mins :)

[@Streetsaw]

defjef333 glad to hear it worked for you! We have all types of batteries for sale on our website www.streetsaw.com for anyone else with the same issue

[@RoseGold823]

​@@StreetsawI can buy a hoverboard for the price of your battery. Do you have an economical battery you would suggest

[@bubblysnowflake1853]

hi I replaced my hoverboard battery ...it's currently on charge but when u press the power button it comes on (green) and then turns off

[@kellywolfe5930]

My daughter has a hoverheart hoverboard that was manufactured in 2018 and I can't find the charger for it can you link a correct one model numbers hs-810

[@MarlonRenovations]

Where should I get a battery for my hoverboard

[@marcypotts8720]

We have the 4 screws out of the battery but it is still very tight. Can't get it out. Where do you buy batteries?

[@mattballard6812]

Can you tell me what battery i can buy as a replacement for the gyroor warrior g2?

[@bertsbug]

Take it apart and see what battery you have

[@Cbenz280]

Which battery is best?

[@johnjorquez3982]

My daughter's hoverboard battery is 25.2volt . . I can't seem to find one?

[@MrDraystar]

thanks for the video, basic clear and easy to understand, good idea setting torque on drill driver

[@caraalfonso2684]

My battery does not slide out, it seems like it is glued down. It is Hoverheart brand. How do I get the battery out?

[@florentin4061]

Yeah to me was it glued down too, Try to get out with a little force

[@johnk12345100]

I wish my phix was that easy, I have a Jetson Rogue model, and it looks like the battery is in some type of black case, much more difficult than just the blue battery that you pulled out. Any suggestions? It looks like when I unplug two wires it goes to a circuit board and then from the circuit board it goes back into this Black Box Thing

[@amayzing28]

I have the Jetson rave I’m hoping it’s not complicated

[@bertsbug]

I also have a Jetson X10 battery last 30 minutes. Going to take apart to see what battery it has

[@jonathon234598]

where can i get another battery for a jetson v5 hover board

[@Streetsaw]

jonathon jobes we will finally be stocking these! Check out our website and ask live chat if you need any help!

[@ghanem4life]

@@Streetsaw what you website?

[@mangomoji4664]

What battery does the Gotrax Hoverfly+ use?

[@Streetsaw]

CrystalClear send us a picture

[@sanjeevkumar-mj9fh]

Kitna volt ka baitry hai

[@joshualawlor204]

How do you get the battery

[@KathrinCubingOfficial]

Amazon or Ebay. The name of the battery is Li-ion battery

[@gamplaymihailo1658]

thanks you my hoverboard is now like new

[@jdouglas316]

really eseasy to do and helpful!

[@DibsRibs3279]

@StreetSaw HoverBoards, i have a hoverboard where the outside cover is glued and screwed. Would brute force work to get it off or am i going to need a to get a heat gun?

[@rainbowrailroadcrossing7798]

My screw is stripped how do I get out a stripped screw

[@_AirWolf_]

put a rubber band down and then screw or use super glue on a thin screw driver

[@rainbowrailroadcrossing7798]

Oh I remember trying that

[@_AirWolf_]

@@rainbowrailroadcrossing7798 maybe try using a thin piercing drill into the screw to get it out or break the plastic shell around it

[@rainbowrailroadcrossing7798]

@@_AirWolf_ I’d have to grab mine out of my shed

[@MickeyMishra]

Dang these things are 7 years old now? Whoa. Bought my niece one. Took apart the pack. Cells were less then a volt. So permanently damaged.

[@luiscampos266]

We're can I get a battery for cheap.

[@wessel6429]

Alieexpress

[@user-zd3ns6wx7y]

Simple enough. Thanks

[@xxkillaxx8408]

How much is a new battery

[@bertsbug]

Depends on what battery you have.... Take it apart and look

[@drole6659]

the sound of stripped screws

[@rainbowrailroadcrossing7798]

Mine are striped how do I get them out?

[@kathyjohnson6873]

Thank you!

[@kbandzyo]

Thanks for breaking my hover board

[@Aviation-kx6wf]

VeriLooka no it’s you’re fault

[@Streetsaw]

Follow our steps and also read our repair guides at www.streetsaw.com next time and you won’t have that problem ;)

[@rainbowrailroadcrossing7798]

My screws are stripped

[@_AirWolf_]

@@rainbowrailroadcrossing7798 put a thin rubber band in and then screw, it'll help with rounded screws. i think there are other methods as well, worse case put a dot of super glue on ur philips and go to work

[@bertsbug]

It's always easier to blame somebody else for your mistakes and failures

[@pandagineer1614]

How will I know if the battery is bad?

[@Bob_theNPC]

Thank you

[@sonidogorila358]

I replaced my battery but won't charge. Then only work for 5 min then turns completely off

[@Streetsaw]

Sonido Gorila probably your charging port or the circuit boards. Feel free to send us pictures via live chat at www.streetsaw.com and we’ll help you solve the problem

[@swaggkill9338]

Thanks you it work

[@LemonJuiceGV]

"I do this professionaly"

[@DeeDevonair]

Hey pro you should never use a power drill you’ll fuck up the bracket! Also the wires go under the bracket! Lol

[@jimlupi]

My hoverboard has 3 sets of wires coming off the battery. batteries all show 1

[@yosifhaqi9909]

اريد البطاريه منين احطلعليها

[@MikeJrOfficial]

Put the drill down! 😂

[@dapoadepoju8583]

Thanks a million.

[@123TauruZ321]

"Don't screw it too hard, because you'll break the plastic" *Whizzz GRZZZZZZZ* I'd wish you did things a little slower, and zoomed the camera in a little!! And actually replace the battery!! 3/10

[@rotcod2886]

That wasn't the plastic breaking. That was the level of torque being reached.

[@bertsbug]

On his drill he has it at the lowest setting so it doesn't strip screws that's just a drill hitting its torque setting

[@robsale1488]

Wow

[@joshchatwin8569]

The battery’s are so expensive

[@Mark-fg9pf]

Yeah, its like why not buy a new hoverboard for $170 than pay $100 for a battery?

[@PasikoOriginal]

It’s called Segway it’s not a flying board

[@Streetsaw]

Yassen_ B actually Segway is a brand, but that’s none of my business 🤙🍸

[@zeontabonebriffa9107]

No no no I'm not going to do that

[@arcedaniel]

Mine Exploded!

[@defjef333]

glad I read this AFTER changing mine!

[@Streetsaw]

Sure it did...

[@hardusvd]

My brand new hoverboard run time is around 25 minutes then it cut off power of board. At full charge it was around 41.5 V and after 25 minutes the battery voltage was only 37.8 V for cut off. Why is the voltage still so high and already there was a cut off the power? At wat voltage should the board switch off? Any suggestions?