How To Install a Seat for Harley at RevZilla.com

[@GregDoncaster01]

Lemmy you are a genius. Such a simple solution

[@lindagonzalez5558]

This video was great!!!! Thank you. I got tired of waiting for someone to change my seat. I am a 68 year young woman and this is my 30th year riding. All I wanted was to change from a two seater back to a solo. I’m so glad I came across your video. 🙏🏼🙏🏼👍🏽👍🏽 it also made me proud of myself. ❤

[@deoxysx1657]

Enjoy the ride and be safe 🙏 🏍️

[@ossiemoore941]

Your solution with the string & nut alone was worth a thumbs up. Genius.

[@mdlallemont]

You saved me a lot of trouble. I bought a new Road Glide ST and had to take the solo seat off so that my wife could take a ride on the new bike. The dealership gave me that nut and did not tell me anything else. I had an old two-up seat but had lost the seat bolt. So I headed down to Lowe's, they were about to close, got a ¼" - ½" bolt, a lock washer and some string and came back. It took me two tries but I got it on there and now everyone is happy! Thanks Lemmy!!!

[@72DustRam]

Awesome tip with the string! I was ready to pull off the back wheel just to get this sucker on the fender. Glad I watched this first!

[@brobocop.]

the simplest solutions are sometimes the best. learned so much from this channel. thanks a bunch RevZilla.

[@BELTR.]

Best motorcycle channel on KZbin.

[@island_hopper]

What a great installation video. Good pointers especially with the string trick.

[@SpeedbeetleV2]

Wow. I'm glad I watched this. I have a 2up seat on the way and it didn't occur to me that I'd have to switch the hardware. Thanks

[@cowmilky]

Lemmy, you are currently my favorite youtuber!

[@brucejamesmorrison7931]

Mucho Gratitude for the extract/relocation of seat fender screw threaded insert trick with string and nut !

[@FretFreak02]

Fantastic tip on the wire Lemmy! I’m so glad I watched your video before getting started on my saddle.

[@zoltanmariusbursan7042]

Was a good tip for screwing the bolt by hand first... I do it always, now... after i broke a nuts thread forcing the bolt with a screwdriver. Thank you guys!

[@djchris4771]

Just used the string trick! Thank you for this brilliant tip.

[@GregDoncaster01]

You are still a genius Lemmy. I love ZLA

[@mackey631]

im glad im not the only one to use the string through the seat nut, now have one with a C clip on it

[@eduardoalmeida3526]

Does'nt he look like Bob Elvis, from SAMCRO?

[@JustAnotherReviewwithAlek]

Do u have a video has to install passenger pegs on the same bike

[@xheadlessx]

Greetings from Dubai , thanks a ton my man I just upgraded my 48 seat , your video helped me do it myself 👍

[@earnestmerida]

Just picked up a switchback with a single seat, putting a sundowner on it today! Greet video

[@payaso1110]

Life saver on adding new seat hardware!!!! Genius 🤯🤯🤯

[@geraldwhitley7611]

Thanks for the demonstration on the seat just bought my first harley davidson 1200 Sportser 48. Being only 5'4 I'm a little on length so I was wondering if you could move the seat forward so I can reach the controls better thanks alot

[@whocares0692]

My God. Such a simple way to change the location. Thanks

[@Butchsteele-pb4jc]

Pulled my seat off as I have in the past for various reasons. This time to pull battery and check it and regulator. However this time for some reason I can’t get my seat back on. Slide the Tongue in but seat won’t go up far enough to line up seat connector

[@DesmoDreams]

Ingenious 😀 I'm aways using string or dental floss for these types of jobs. Floss works well for very small holes, gaps etc where strings too thick, and it's surprisingly strong!

[@guybenedict8355]

Thanks, you da' man. String simplicity. I owe you a dual brew.

[@dastuun]

Dude. The string trick. Nice. Thanks, Lemmy. On the verge of calling you guys to pick up a Villain for my Fat Bob.

[@bernarddascendis8725]

I have a Harley 07 Dino I cannot get the double seat off in the front. The latch will not separate help.

[@the_locksmith_life]

Have a question, I have swapped my gas tank on 1987 fxr with a stretched Drag Specialties tank. Now, there is a gap between the seat and the tank. What solo seat would you recommend to fill that gap?

[@lilneff9975]

Tried removing the two person seat on a 2006 Sportster Custom; I just bought. I need to get to the battery. I removed the rear nut but it appears to be anchored mid seat right behind driver. It will not slide off. There's a bolt under the fender right about where it's stuck. Need some help.

[@rogershockley7202]

Having problems with tall boy seat with backrest bracket won’t fit over slot in tall boy seat.

[@lesclifton3548]

Awesome video. I feel pretty stupid. I was about to go buy a jack and take the wheel off to get the hardware in place on the fender. You saved me a bundle.

[@josephpiazza1987]

Is there another video explaining how to install the passenger foot pegs after you install the 2-up seat?

[@RevZilla]

+Joseph Piazza We don't have a video for that yet, but we may make one in the future. Thanks for the feedback! -DrewZilla

[@godrickgnomeski5590]

@@RevZilla have you made that video yet?

[@dennishunsberger7716]

I bought a seat from C C Riders for my 2020 street bob and it doesn't have the tab to connect the back seat down like the factory seat! The underneath of the new seat has an a spot that looks like some kind of fastener to go in it to hold it

[@dennishunsberger7716]

Is there some different bolt in that would keep seat in place! The seat is suppose to be for the bike

[@scottdelaney3575]

Lemmy I need your help my man. Recently bought a 2006 night train with aftermarket rear fender and custom seat. Problem I have is they used velcro on the seat and fender to hold seat in place can I drill a hole in fender and use seat hardware nut? Secondly can you buy the bracket for the seat itself and install on the bottom? Any custom ideas would be great.

Thanks for the 883 content, Lemmy!

[@soniabailey6855]

What is the name of those screws that connec the front and back seat together

[@stuartbertles8721]

I just bought a sundowner two up seat for my 2005 fatboy and the tang on the front of the seat will not get low enough to get into the slot....should I try to bend the tang down some? Is there another way to do this? the tang is riveted so there's no adjustment there.

[@Vocalzone_covers]

Hey. Love your videos... I have a 2006 harley Davidson sportster xl1200c. The ecm unit sticks out above the frame under the seat giving me less choice of seat types. Do you do a video on relocating this unit please. Thanks

[@davidrickerson277]

I've got a 2015 FLS I believe the seat is stock. It's pleated.#H848701AR09403/ P52000031A I want to purchase a Pillion seat and passenger foot pegs. There seem to be pleenty of used in good shape but which one fits??? I have the same issue with Foot pegs. Any suggestions??

[@tomcard2167]

That string trick will save me When I can ever find a passenger seat for my softail standard. That’s been a mission in itself

[@catyoung2959]

Where dose the strap bolt onto? That came with my seat?

[@derekflanagan2817]

What seat is that he put on? Sorry if he said, had to watch without sound

[@ajalamcgregor9354]

Can you do a seat change for a Honda rebel ?

[@fjoy3376]

2021 883 is NOT keyholed for adding the fitting to screw the seat down

[@titusrobinson4739]

Does RevZilla sell 4.5 tanks for a 48 sportster 1200

[@RevZilla]

We do not, but you should be able to guy a tank from a similar year XL1200C and bolt it right up! That will give you the additional gas capacity you want. -Zack

[@ronwilhelm2467]

you have any videos on adding a back rest on a 2007 Ultra Classic ?

[@RBoysMedia]

QUESTION! Hello, I already knew how to put seats on but I noticed mine wobbles, is that normal? I could be worrying over nothing but I had to ask somewhere. It’s not a massive like fling me off wobble. It just has a shake left, right, forward and back. My clip is under the tank and in the correct spot. My bolt is tight. I tried bending my clip up towards the seat to lock in place better under the tank. No difference. It is a pretty wide seat, just about goes over the sides of the frame. So is this normal? Thank you

[@RevZilla]

That's perfectly typical. The slot style mount in the front does allow a small bit of play, so a little shimmy and shake is no problem at all. -Zack

[@kerryhamilton8776]

Dude. I appreciate your way of communicating. Thanks. I have a 2012 HD SB FXDB and it has some weird little luggage rack thing on it. It looks like I have to remove the wheel to get to the bolts under it to remove it. Is there a seat that can sit on that rack? Or do I have to take everything off?

[@connorladd4970]

I'm having trouble putting the grab strap nut up through the fender. Do you have any tricks for that

[@RevZilla]

You can use some string or a long zip tie to fish the nut up through the fender. -DrewZilla

[@rodrigochaves5185]

RevZilla, can I change the original solo seat ( as in a HD forty eight) for a two-up seat without any trouble?

[@markthaxton6074]

Lemmy, Love your videos. I just purchased a 2019 48. What seat would you recommend to put on it to get the seat closer (fill the gap) to the gas tank? It has the small standard tank on it. Thank you

[@michaelwilliams2232]

Thanks for the trick with the string !

[@mariomunoz1785]

Great video. Was wondering if you guys carry a 2 seatup for 06 softail deluxe

[@YourBBCoach]

Hello, can you tell me how to replace the seat on a 2018 Fat Bob, I want to install a 2 up but the strap is bolted down to the bile and I cant get the seat out. Thanks!

[@RevZilla]

If you cannot remove the seat, you need to unbolt the strap. -DrewZilla

[@YourBBCoach]

Thank for your reply, I figured it out, pull the strap forward as far as you can, lift up the back, unhook from the front and slide the seat forward from under the strap.

[@RevZilla]

Excellent! Yeah, it can be a little tricky. -DrewZilla

[@davidramsey2263]

I have a Harley super glide 2007 bought used came with a double seat, it has a strap on the center which is bolted under the seat to the frame, a real pain to remove. do I need it to help hold the seat on ? I would love to leave it off, since I take the seat on & off in winter to take out the battery. So DO I NEED THE STRAP ?

[@RevZilla]

+Jack Hunter If you ride with a passenger who likes to hold onto that strap, then you'd probably want to keep it on. However, it's not totally necessary, so you can definitely remove it if you prefer. Understand that in some states, it may be an inspection violation if removed though. -DrewZilla

[@jerrysaunders6105]

+RevZilla I just bought a 2001 Softail Deuce that came with an aftermarket seat that is okay for the driver, but the passenger part is too narrow. I have the OEM seat and I tried to change it out, but I don't see how the strap comes off. A little input here would be helpful.

[@RevZilla]

+Jerry Saunders The strap is either attached to the seat or attached to the frame, and you should just be able to remove the fasteners holding the strap. -DrewZilla

[@jerrysaunders6105]

+RevZilla Neither one. The strap is somehow attached to the fender under the seat.

[@likebliss]

I have what harley calls a "fender plug" on my 2007 xl custom and I'm not sure how to remove it. Do I just pull it up till it pops out? feels like it's gonna break

[@RevZilla]

+Bliss Garcia (Bliss) If you want to be extra careful, pop it out from underneath the fender. That way you're pushing it out instead of pulling. -DrewZilla

[@likebliss]

Thanks, Drew! (:

[@gak2173]

For all your stuff Lemmy... you Rock!

[@DavesRepairService]

What do i do when the ecu is under the seat and i have a hole in my fender for the holder

[@RevZilla]

People generally zip-tie the ECU to the battery, so that more seat options are available. If you have an exposed fender hole, you would use a plug. -DrewZilla

[@krich559]

My seat has a belt/strap separating the front and tiny back seat that runs under the seat and has a bolting point under it that I'm completely baffled by. It's a Softail Fat Bob. Any experience with that?

[@RevZilla]

Traditionally, it's been used as a handhold for passengers. -DrewZilla

[@MrBeastky]

Silly question Lemmy. trying to attach the strap to a sundower seat. can't for the life of me figure it out, any suggestions?

[@RevZilla]

I believe there's a single bolt that holds both ends of the strap in place. -DrewZilla

[@MrBeastky]

I must have a short strap then. definitely cannot reach any bolt

[@jasonbourne187]

what is the black plastic washer or caller for that came with the seat bolt pack?

[@RevZilla]

The pack is the Seat Nut Kit, which is basically a _well nut_ with retention washer. -DrewZilla

[@anthonyaurisano5142]

thanks Lenny string tip was cool!

[@ablicea]

Where can I buy a badlander 2 up seat for my 2012 dyna street bob fairly used at a descent price?

[@RevZilla]

Maybe eBay. -DrewZilla

[@changunn]

That’s a Roland sands mustang seat right? Looks awsome!

[@josegilbert8337]

Need some help guys i got a 03 electra glide well i ended up picking up a seat off a 10 road glide my seat slips into the frame this seat off tbe rd glide has a tounge that slips into the seat is there a kit to swap them or am i going to have to take the one off my seat and maybe rivit it to the one off the rd glide ....other then that the seat fits perfect n gives me everything im lookin for ..but thats my only prob i already ordered the lower dash extention piece

[@RevZilla]

There's no kit, so you'll have to swap any hardware over yourself. -DrewZilla

[@josegilbert8337]

RevZilla ty bro really appreciated...

[@ThomasKBurke]

Lemmy, if I am going to use my same seat hardware when I move it to another hole on the fender (going from factory 2 up, to an aftermarket single seat) can I just undo the fastening clip and let it drop out the bottom to remove it? Might seem obvious, but is that cool, or could it get lost in the bike somewhere? Thanks.

[@RevZilla]

If you can get your hand up between the tire and the fender, get to it that way. If not, you could just let it drop out and hope it doesn't get stuck somewhere (it's unlikely but still possible). You could also put the bike up on a center lift to let the rear swingarm drop a bit more for more fender clearance. -DrewZilla

[@RevZilla]

+Rodrigo Chaves You sure can. Below is a link to HD Forty-Eight seats for two-up riding. -Hi-Viz Brian * rvz.la/1Nv7IZX

[@rodrigochaves5185]

RevZilla thanks very much mate, I was afraid it could compromise the suspension... I'm checking the seats in the link ^^

[@jamescasello8100]

Hi there, great video...I like the softail seats for two but have a road king...Can I install a softail seat on there ?? I dont mind moving a few things to do it, but wondering if the profile of seat is that drastically different than mine...Thanks, Jimmy

[@RevZilla]

No, the seat pans and frames are entirely different between the two bikes. It's not even a matter of moving things. I recommend you use our "SHOP YOUR RIDE" feature via the link below to find seats you like that fit your Road King. Once you enter your bike, remember to select the EXACT FIT tab. -DrewZilla *www.revzilla.com/harley-seats

[@Stephen-wh7vl]

Those little decorative hole covers. I need a few. What are they called where can I buy them

[@RevZilla]

Are you referring to the seat thumb screws? -DrewZilla *www.revzilla.com/motorcycle/mustang-quarter-turn-seat-screw-for-harley-1984-2017 *www.revzilla.com/motorcycle/drag-specialties-knurled-seat-mounting-knob *www.revzilla.com/motorcycle/kuryakyn-knurled-seat-knob-for-harley *www.revzilla.com/motorcycle/drag-specialties-six-shooter-seat-screw-for-harley *www.revzilla.com/motorcycle/saddlemen-seat-mounting-knob

[@lukemaltby2534]

Hey,Lemmy,what pillion seat was that?will it fit my iron 883,thanks in advance

[@ctguy1955]

I just read the HD owners manual and then tried to take my 2016 FLD seat off. The manual mentions undoing passenger strap bolts but they mention several different kinds of seats and I thought it would be as easy as Your video, but I have too much resistance to just pull off the seat like You did and Im just confused and am frustrated with the owners manual the way its written. Could be My seat will remove just like this video, but as its so new, its just me not using enough force, but I would rather ask You then be a newb and break something. I need to take the seat off to run wires to install BOOM music system.

[@RevZilla]

Once you remove the bolt holding one side of the passenger strap as well as remove the rear seat bolt, you can lift the rear of the seat then slide the seat backwards to release the tongue of the seat. You probably need to open one of the side cases in order to access the passenger strap bolt. -DrewZilla

[@ctguy1955]

Thank You so much for Your reply ! I appreciate it very much. I read the manual and watched many tube videos and none of them were like mine. I went back to the bike and used a little more force and it came up after sliding back. The single passenger strap bolt that both ends were secured with, had so much strap that I could put the seat sideways without undoing the screw, and get to the cable I needed to attach the Boom Audio power wire. Thank You !!!

[@Gooseygoose14]

Does anyone know if there are seats out there that have storage/extra space underneath them. My problem is after I installed LED glow lights on my bike, the wiring barley fit under the seat. Now I just bought an alarm system but there's no space for it or it's wiring. PLEASE HELP!!!

[@RevZilla]

We do not carry any seats that specifically have extra space underneath. I apologize for the inconvenience. -DrewZilla

[@MrJeepmarine]

Sucks, I cant get the stock seat off my 2007 Sportster. It seems like the center portion is stuck on something.

[@MrJeepmarine]

Kelleen Murray, I got it. Thanks.

[@misterpogi1352]

Mine is too. There is a bolt there holding it. You are supposed to slide it forward to get it to release but mine will not release. The slot it is in doesn't get large enough to release the bolt.

[@adrenalinehigh2070]

Great video! I love that 2-UP saddle you did the demo with. What brand and model was it? Thank you

[@danielchavarria8556]

Dis they ever say what seat it is

[@stanlara323]

Any word on that seat name brand ?

[@matopendic8669]

Can i put 07 seat on my iron 883 2014?

[@RevZilla]

Hey Mato, Those years are the same for seat fitment, and should share seats just fine! Hope that helps! -Zack

[@twowheeledanimal4805]

LEMMY HELP! I went to change out my stock seat for a mustang vintage solo and ended up getting black out drunk. I woke up in mexico and I don't know how to get back to illinois!

[@MrHoofard]

I have a 2006 Harley Ultra Classic and I need to get my seat off to charge the battery, but when I got to the removal of the back rest I found that it's not like the video shows. I have no idea how to get it off with out tearing it up and I really don't want to do that. Does anyone know how to remove that back rest?

[@stephenchirico5456]

I had the same bike and the rider backrest was mounted onto two parrallel bars that are spring tensioned to keep it in place. insert your hand into the crevice and squeeze the two bars together and gently pull up, should come right out. Many times for me one side would still be "locked in" just work at it.

[@egbertsanchez6264]

What is the name of the first seat he took off??? Anybody knows?? That's the one I'm looking for

[@RevZilla]

Yes, it's the Biltwell Champion Seat in the Vertical Tuck n Roll pattern. Hope this helps! -DrewZilla *www.revzilla.com/motorcycle/biltwell-champion-seat-for-harley-dyna-2006-2017

[@orion0587]

Would love that seat on my 2007 Street Glide

[@Charliano700]

That Top coat F11 commercial was painful, I bought 2 bottles at some crazy price, It does not do anything. AM I doing something wrong or is my new truck and bikes just too new? lol jk but seriously it is no different than a good wash and dry, Chemical brothers wax spray did same for 12$ great video share from Revzilla here though!

[@texasvet9051]

What seat is that 2 up seat that he installed?

[@RevZilla]

That's the Roland Sands 2-Up Boss, check out the link below. -Kraus-e *www.revzilla.com/motorcycle/roland-sands-2-up-boss-seat-for-harley-dyna-2006-2017

[@markmontaine626]

thanx! you are a very good teacher

[@acidrunner78]

hahaha, I am going to try the beer thing now. Nice info about the seats as well.

[@peterbreen7052]

Lemmy im new to bikes and i just got my 2017 iron 883 after watching your review of it! Like you, i kinda want some space for my wife but i dont know where to start when adding pillion pegs. Any advice?

[@RevZilla]

Pillion pegs are actually pretty straightforward to add. We offer passenger peg mounts as well as a whole host of different pegs. Then you'd just need to look at 2-up seats. For additional guidance, feel free to get in touch with one of our Harley Parts Pros at 877-792-9455. -DrewZilla *www.revzilla.com/motorcycle/drag-specialties-passenger-peg-mounts-for-harley-sportster-2014-2017 *www.revzilla.com/foot-controls-pegs

[@sbvrtv]

It's a RSD Seat the 2 up?

[@RevZilla]

Yes, it's the RSD 2-UP Boss Seat for Harley Dyna. -DrewZilla *www.revzilla.com/motorcycle/roland-sands-2-up-boss-seat-for-harley-dyna-2006-2016

[@familybee2962]

Beard levels of difficulty. You are amazing lol

[@bcbudGstatus]

I clicked on this video to make fun of it but that was actually a good tip for moving that seat nut

[@edt3834]

What is the model of the 2 up seat, and does it come in a daddy long legs version?

[@RevZilla]

It's the Roland Sands Boss Seat, but it does not come in a daddy long legs version unfortunately. You might consider the Le Pera Maverick and Daytona Daddy Long Legs Seats instead. -DrewZilla *www.revzilla.com/motorcycle/roland-sands-2-up-boss-seat-for-harley-dyna-2006-2017 *www.revzilla.com/motorcycle/le-pera-maverick-daddy-long-legs-seat-for-harley *www.revzilla.com/motorcycle/le-pera-daytona-daddy-long-legs-seat-for-harley-dyna-2006-2017

[@edt3834]

It looks like your out of stock of the DDLL daytona. Do you know when you will get more in?

[@zemaniak22]

RevZilla any seat (2up or solo) that is even further back then the Daddy LL?

[@jacobowitness5564]

does this work for the xl 883?

[@RevZilla]

Yes, the same process applies to the Sportster. -DrewZilla

[@rickc007]

Thank you

[@Mordorer]

His hand movements remind me of Ricky Bobby when he is talking to the reporter and can’t figure out what to do with his hands. “Just lay them on your side.”

[@ERICLnj]

too bad like all the seats on the site are OOS

[@davidbrooks4285]

That’s all cool but replace the seat on a 2005 XL883C sportster it’s a whole lot different then just setting it on and go

[@brucetapscott5345]

Doesn't show anything about the front of the seat screw isn't that hard to pull out of a fender

[@Ericdgarcia]

black and tan brew 👌

[@srezsrez8077]

2 sitted on vrod???

[@RevZilla]

We only have a seat for the 2002-2006 V-Rod. -DrewZilla *www.revzilla.com/motorcycle/saddlemen-profiler-seat-for-harley-v-rod-2002-2006

[@kwikness]

awesome trick thx lemmy

[@richardanderson4916]

Bro...thank you!

[@MrEduardoPinto]

Hello, great video!! Where can I find this seat? : 724

[@RevZilla]

You can find it right here. -DrewZilla *www.revzilla.com/motorcycle/roland-sands-2-up-boss-seat-for-harley