How to install a slab door and door locks

How to install a slab door. How to cut, shape, drill and install a door from start to finish. This is a complete door installation with locks. How to remove and existing door and install a new door.
Learn how to install doors and repair doors and you can make money with door installation and door repair skills. How to install a door and how to install door locks are skills that will make money and get you paid.
More information and recommended watchlist at www.askillthatpays.com
This is the best channel to learn how to install and repair doors because I show you all the steps of door installation and show videos of multiple types of door installation and door repairs.
You can make money installing doors and repairing doors and I show you how. When it comes to learning how to install doors and how to repair doors, there is nothing quite like my clear step by step process for door installation and door repair. My videos show you how to use all the tools like routers, power planers, drills, drivers, circular saws and more. Once you learn these techniques, you will have a skill that pays, and you could make a living as a door installer.

[@karmasymptoms11]

Thank you for these videos. I replaced 4 interior doors and the only reason I was able to successfully finish was due to these videos. Thanks a million!

[@askillthatpays]

That's great to hear. So glad I could assist. Thanks for watching.

[@DavidWing]

Fantastic video...helped me out tremendously! I definitely found myself going back to specific sections, so here is a list of chapters: Intro 1:07 - Measure and acquire the right door 1:45 - Remove existing door and secure hinges 2:54 - Inspect and address threshold 3:48 - Measure the height and width of jamb 6:08 - Measure the hinge locations 7:10 - Check Jamb for Square 7:47 - Shape the top of the door if necessary 8:20 - Cut the door to length 9:02 - Shape the width of the door 12:03 - Cut hinge Mortises on the Door 15:52 - Attach half of top hinge to door and hang the door 17:52 - Troubleshoot to get the Door Working Properly 19:44 - Prep for the Locks and Door Bottom 23:21 - Cut Door to Final Length and Drill Locks 25:04 - Rehang the door with all screws in hinges 25:20 - Install Locks 26:29 - Install Door Bottom 27:12 - How to Practice

[@askillthatpays]

I'm glad I could help and thanks for sorting that out. I've been doing this a long time, and have found that a systematic approach is the best way, and yet I'm always refining my systems. Thanks for watching and doing the homework.

[@terryguldin8746]

The internet is tough, KZbin has been here 20 years. I saw no trolls or negative comments. You did excellent, possibly the best door slab install video. Congrats!

[@askillthatpays]

I appreciate that. I've been putting videos up for 10 years and most people are pleasant and grateful. I'm glad you enjoyed it. I'm happy to share with others. Thanks for watching.

[@chriskelly3678]

Great job, Instrctor... KZbin University is lucky to have you. Thanks for taking the time.

[@askillthatpays]

I appreciate your kind words. When I first tried to install a door 20 yrs ago in my house, I had to buy it three times after all the screw ups. I decided to create a systematic approach that I could repeat. All these years later, I'm still refining my steps. I'm glad you enjoyed it and thanks for watching.

[@stevemar8593]

Outstanding video, got many valuable tips on how to install a slab door.

[@askillthatpays]

I"m glad you enjoyed it. I've learned so much over the course of my contracting career and I'm happy to share the knowledge. thanks for watching

[@rickharris5485]

Thanks for posting this video. I'll be doing this job today and your tips will be a big help.

[@askillthatpays]

You're welcome and thanks for watching. I appreciate it

[@johnnyv7618]

What a great complete video. Good job.

[@askillthatpays]

Glad you enjoyed it and thanks for the nice words and thanks for watching. I appreciate it.

[@mikesetkin120]

thank you sir for this detailed video .this one of the best video for door installation .

[@askillthatpays]

That's great to hear. I'm glad you found it helpful. When I was starting out, I ruined a lot of doors, so I took the time to come up with a set system that I could repeat and would help others. Thanks for watching. I appreciate it

[@rezab1949]

Excellent job in paying attention to details. Very informative. One of the best videos for installing slab door

[@askillthatpays]

I'm glad you enjoyed it. When I started installing doors 15 years ago, I was a mess. This is simply the latest version of my never ending system of refinement. Thanks for watching.

[@jakenicol2404]

On my 2nd attempt at bathroom door install. Who knew such a simple looking thing as doors were such a pain in the ace. Appreciate your wisdow good sir!

[@askillthatpays]

I can relate. When I bought my house 25 yrs ago, I decided to replace all the doors myself. After buying the first door 3 times, I decided to step back and figure out a way to approach it systematically. You're right, if you don't have the experience, they are confounding, but once you figure it out, It can be fun and I'm happy to share my experience. Thanks for watching.

[@bluefin7783]

Thanks for sharing your knowledge. Very thorough tutorial. Just installed a heavy slab door on my own by following your steps. Turned out really nice Appreciate it!

[@askillthatpays]

That's great to hear and thanks for the kind words. I appreciate that, and thanks for watching

[@brianwingo7183]

Thank you! Very thorough...excellent steps!

[@askillthatpays]

I'm glad you enjoyed. It took many years of trial and error to figure out this system and it's STILL a work in progress. Thanks for watching.

[@claudiofornaroMusic]

What a great detailed thororugh video -- So professional! Thank you 👏👏👏

[@askillthatpays]

I'm glad you enjoyed it. Thanks for watching

[@itsmerob6120]

Awesome techniques and thank you for the video. Subbed

[@askillthatpays]

I appreciate that. It's been a long time in the making and I'm always making small modifications. Thanks for watching.

[@JennySmith-MormonShare]

This was a fantastic video. Thanks

[@askillthatpays]

I'm glad you enjoyed it. Thanks for watching

[@healthandwealthyness]

very thorough explanation. Really appreciate all this instruction

[@askillthatpays]

You're very welcome!

[@bucky5063]

Amazing video, thanks for sharing your expertise

[@askillthatpays]

I'm glad you enjoyed it. I've spent many years refining this process and I'm still finding small ways to improve it. Thanks for watching.

[@Syfyany]

good job thanks

[@askillthatpays]

Thanks for watching. I appreciate that.

[@jonathanguess4052]

What type of router bit did you use

[@jackfrench3324]

Great video. I've done slab doors before and it was a struggle. With your video I know my next one will be a lot easier and have a better result. Thanks.

[@askillthatpays]

Thanks for watching. Glad I could help

[@jackfrench3324]

I finished installing a pantry door with glass inset 2 days ago and it came out great! Using the planer was a kick. Thanks again.@@askillthatpays

[@leshsl4482]

👍

[@outwestjake]

Thank you for the amazing step-by-step! Just curious, do you paint the doors afterward? Or do you typically leave that for the customers to handle?

[@askillthatpays]

I never get involved in painting and always tell my clients as much before we agree to work. I have no time or interest and I can't carry brushes, paint, buckets etc. I just do installation and repair. Also, during the install, a slab gets handled, shaped, test fitted numerous times and banged around even by the most careful installer. Also best to finish them after installation. Thanks for watching.

[@myronp243]

These interior doors come with frames you have to assemble yourself.Can't find any videos that show how.

[@askillthatpays]

Here's a video I made on how to assemble your own frame. kzbin.info/www/bejne/nYiwgIewZth1hpIsi=HC3kgeYYoWwFVCCD

[@jonathanguess4052]

For the hinges

[@askillthatpays]

I use a 3/4" straight bit and I prefer the Diablo brand. Don't go cheap with router bits because the cheap ones burn up quickly. I also have 1/2" bits but I like the 3/4" because they cut a lot with each pass and it's faster. Thanks for watching.

[@luisolivares3460]

Great video! 🫡 How much should you charge for interior door installation?

[@askillthatpays]

I've run businesses in CA and TN and clients and economy are different. I always give the best price I can and these are the factors I consider. 1. How long will it take? - Decide how much your time is worth and charge accordingly. 2. How hard is it to do? - This could mean the level or expertise or physical labor. I charge more for rooftop doors than ground floor doors because it's simply harder to get heavy doors onto a roof. Interior doors are lighter and easier. Some exterior or solid interior doors weigh a ton. Sometimes there are many steps, small hallways, basement, park far away. That makes work harder. 3. How busy are you? - When I started my business 15 yrs ago and had no clients, I'd work for whatever someone was willing to pay. I hung my first door for $25. Now my phone rings every day, so I set my own price. 4. Client expectations - Some clients are facing tough times and I try to give a break within reason. Other clients are extremely demanding or want something done yesterday. 5. I NEVER charge by the hour - I always give a flat rate based on my experience. That way nobody has to watch the clock. 6. Economy and geography - In Los Angeles, people have crazy money and will spend whatever it takes to get it done well and get it done today. In Nashville, people are more conservative with their money and, rarely in a hurry, and not as demanding. Item 1 is really the most important. I hope this helps. Thanks for watching.

[@luisolivares3460]

@@askillthatpays Thank you so much for responding. You know when a person has a lot of knowledge about what he does for a living. I don’t do a lot of side jobs, that’s why that I had to ask you. All the factors you mentioned are certainly true. I appreciate all of your videos, very helpful! Have a great day!

[@ljohnmeyers8602]

Awesome video! Will be tackling a door replacement soon. Who makes the door bottom you used?

[@jaredosentowski5293]

Umm what is your roof rack? Custom? Curious, working out of my SUV and that thing looks slick!

[@askillthatpays]

Yes, I've made several roof racks and decided to learn a minimal amount of welding so I could make something that truly fits my specific needs regarding doors. I explain more in this video. Thanks for watching. kzbin.info/www/bejne/sISzZHuVlMZ3iM0

[@weiliu3623]

Can you do the same with a new metal slab door?

[@askillthatpays]

That depends. If the door is ALL metal, then they can't be shaped, however, SOME metal doors have wood along the edges that can be shaped. If that's the case, then the same steps apply and here's a video of me installing that type of door. Thanks for watching. kzbin.info/www/bejne/f5PSdaGPjb6Jr7Msi=xobxVWkM1EzgXSTV

[@weiliu3623]

@@askillthatpays Thank you very much! I educated myself enough to not DIY but to know my options.