How to install a standard Colorbond fencing panel - Outback Fencing

[@krawleygaming5079]

Nice work! When I screw the post together I mark 1.8m down in the middle and screw it, So that when I put my rails in they sit on top of the screws 😊

[@andrewsmith8729]

East as winking. It has been 35 years since I built stone and timber retaining walls.... These panels look so easy to install.

[@robertanderson10]

I followed your video for my project and it really helped me understand the best way to do it. Thanks heaps for this, much appreciated.

[@nathanunsworth1255]

I like the way you set the posts while the quick set was partially dry. Lots of tricks in the vid!

[@leebenson77]

Nathan Unsworth no worries mate👍👍

[@PerthfenceAu]

Good to see a another good contractor around. Well done :)

[@leebenson77]

Wow, thanks guys

[@annaarbas12155]

Genius people like you who make a laymans life easy. thank you brother for your helpful video

[@leebenson77]

Happy to help

[@craigfield9447]

Thank you for your helpful, well executed fence installation demonstration.

[@jacksirren2372]

Pull string lines on the top & bottom as a precaution. That will make plumbing your post quicker and that makes it easy to notice any un-plumb posts.

[@gav6808]

A magentic spirit level helps big time doing this job.

[@DebLister]

Fantastic instructional video - thanks!!

[@ilovejclove7516]

👍 So true Anger can ruin anything if you let it. Great vid ty.

[@leebenson77]

Ha ha

[@mandlakei3053]

Really good video. Can you please do a video on running and leveling the string line?

[@prancer4743]

Thanks great information 🙏🙏🙏

[@dragodereta6287]

Thanks. Very understandable. Good job!

[@leebenson77]

Drago Dereta no worries mate. Hope it has helped you install your Colorbond fence

[@Grub370]

Great video thanks mate!

[@patwhite2740]

great video, can this be installed with 2 x 200mm sleepers? do they just slot into the upright posts? Cheers

[@leebenson77]

Yes they can.

[@battlinglefty9301]

Learning every day - thanks for this. What do you think: Concrete sleepers v the colorbond aluminium sleepers?

[@leebenson77]

I like concrete sleepers

[@jeffreyallardyce9288]

How do you level your string line?? Probably really simple but I just can’t get my head around it. Wild guess... a laser level on both stakes at each end?? Please help. Thanks. Video is awsome!

[@leebenson77]

Yeah laser level, but it depends how precise you want to be. Levelling with a 1200mm spirit level can do the trick on small runs.

[@jeffreyallardyce9288]

Lee Benson Fencing thanks for that! I have another question. Installing colourbond fence directly on a concrete slab. Can you get feet that can bolt to the ground and the posts go on that?... ive just built and doing everything myself. Any help would be appreciated

[@jacksirren2372]

Laser level OR a Line level

[@Alex-yo4wf]

I’m doing a little infill at home dimensions between the posts are 750mm what size do I cut the sheet please

[@dharmindersingh-jd3jx]

How long u wait for concrete to set before u start putting panels

[@diamonddog662]

Great work, How would u get the sheets to rake on angle land? And also do u make all the post plumb on slopes? Does it use 3 or 4 sheets per a panel? Thanks

[@leebenson77]

Make the posts plumb and use the rail as a spacer as per normal. But then get longer sheets and cut top and bottom on angle

[@diamonddog662]

@@leebenson77 how do you get the angles?

[@dylannewby3926]

You step each bay as required

[@alexk6745]

I have clay soil in Canberra. Is it possible to install it without concreting for the case if I want to move them later? Can I concrete them so that I can move later if needed?

[@JamieBoyd-sl6dj]

Concrete wooden posts and screw rail to wooden post. Only losing posts when removing fence

[@dylannewby3926]

Colourbond is very affordable I’d just cut the posts of and replace if I wanted to move it at a later time

[@robgorman8961]

Where's your string line across the top ?

[@robertcalaguio1105]

For 3 sheets colorbond panel what is the width of the rail 😊

[@robertcalaguio1105]

What is the length of the rail😊

[@leebenson77]

It can range from 2350mm to 2400mm depending on which state you live in

[@ericla3529]

Legend!!

[@leebenson77]

Thanks

[@TOMASbarry1916]

All Australia made , made in Australia. I can see why you edited it out lol but good job

[@stephennjuguna315]

Much appreciated

[@starshines9054]

Pls guide me installation panel detail's and products technical details, if possible correct meeting is possible sir.

[@bt9087]

I'm surprised how easy to put the post into unmixed concrete. Plenty of water and concrete and the post can slid in so easily??? Hmm I'm installing one in a month's time not sure if I dare to do what he does. But it looks so easy.

[@jacksirren2372]

ADBRI’S SPEED SET requires no mixing

[@michaellaffin3538]

Hi Lee awesome video. i'm planning on putting a fence/gate over a 3m span. The gatewould be standard size, qhats the best way to install in the run of fence panels? any help would be appreciated. cheers :)

[@rcklandsculpture4028]

No fence caps?

[@pokeutopia]

What was the brand of concrete bag you used that you simply poured into the hole with water?R

[@leebenson77]

Can’t remember sorry

[@garryibbetson9912]

ADELAIDE BRIGHTON CEMENT LTD

[@garryibbetson9912]

@@leebenson77 ADELAIDE BRIGHTON CEMENT LTD

[@jacksirren2372]

ADELAIDE BRIGHTON CEMENT

[@simonthompson474]

NICE CHEERS

[@leebenson77]

no worries

[@DestinyofAfricaProduction]

Beautiful video but, you did not mentioned about PPE (Personal Protective Equipment). When you spoke about windy day, you supposed to talk about the PPE. Overall, well-done!

[@aljosi5394]

Yes he did he said put your elbow if windy or you cut your hands lol

[@donburke4886]

Nice video mate,but please use correct terminology ..It's plumb not level..The stringline is 'level'..The posts need to be 'plumb' ..But still nice work !

[@petergleeson826]

Need to mix the rapid set with the water you can’t just add water then the cement and leave it

[@leebenson77]

the bag says specifically not to mix the concrete first. just following manufactures instructions

[@zr2608]

How did you level the string line?

[@jacksirren2372]

They usually use a $20 Line Level