How to Install a Tape Measure Tool Attachment

The FallTech For Tools™ Tape Measure Holder Tool Attachment is used to attach the FallTech For Tools™ Tool Lanyards, for use with FallTech® Wrist Attachments and Tool Anchors.
The FallTech For Tools™ Tape Measure Holder Tool Attachment is designed to be used as a component in a dropped object prevention program. The tool tethering system is an assembly of components and subsystems to arrest a tool from an accidental drop. The system typically consists of tool attachment, a tool tether, and a tool anchor. See product labels for maximum load capacity and maximum allowable tether length.
The FallTech For Tools™ Tape Measure Holder Tool Attachment is designed for use by a single tape measure with a combined weight no greater than 2 lb (0.9kg) or based on the rating of the Tool Tether. DO NOT use the Tape Measure Holder Tool Attachment if it interferes with the proper use of the accessory or tool.
Installation:
Inspect the Tape Measure Holder Tool Attachment thoroughly before attaching it to the to the tool for damage or wear. Inspect the webbing, hook and loop straps, looped ends, and stitches for cuts, fraying, and signs of damage to the materials from excessive wear or abrasion. If any of these conditions exist, remove from service.
Ensure the tape measure and Tape Measure Holder Tool Attachment is clean and free of oil, grease, or debris, which could prevent adequate attachment onto the tool. The Tape Measure Holder should be placed away from the functional parts of the tool. See the figures below for the
installation steps.
Undo the hook and loop straps that secure the tape measure. Place the tape measure into the Tape Measure Holder with the belt clip facing the D-ring on the back of the Tape Measure Holder. Pull the hook and loop straps tight to secure the tape measure and attach the hook and loop straps.
ttach your choice of FallTech tool tether to the Tape Measure Holder.
/ / / / This video is for demonstration purposes only. CONSULT THE USER MANUAL FOR MORE INFORMATION.
__________________________________________________
// FallTech® product pages:
falltech.com/product/5400A1
// Facebook
/ falltech
// Instagram
/ falltechsafety
// LinkedIn
/ falltech
‪@FallTech‬ #falltech #fallprotection #droppedobjectprevention #tooltethers #toolattachments