How to Install a Tile Roof Tripod TV Antenna Mount

Demonstration of installing an antenna mount on a tile roof. A TV Antenna for Digital TV can then be installed on top.

[@rajjhamaal7844]

Hi Bro, Your video demonstration is really nice.Its going to be a great help for installing my tv antenna.Much appreciated.thx

[@gregspargo5822]

Would’ve been good if showed how the coaxial cable connects

[@joshuaklease7148]

I'm no expert but I've been installing antennas on roofs for a year and I find it's a lot easier to make up your coax lead on the ground and your tripod and mask on the ground the carry it up onto the roof. Just a little tip of mine and lots of other antenna installers say it's a lot easier and quicker

[@DigitaltvhelpAu]

Yeah it's probably safer too. You'd still need to leave it the tripod bolts loose enough that you can adjust the angle right. I tended to usually feed my cable from the roof so I'd get just the right amount to reach the splitter without waste. That wouldn't matter so much to people who don't do hundreds of them.

[@stephenroberts1763]

Thanks! I'm guessing the coax goes under a edge of a tile?

[@paulaction5957]

I always mounted in the middle of two tiles less chance of cracking one, make sure you've got sharp drillbit's

[@VikramG9]

How to bring that tile down the one you kicked up?

[@TamNguyen-fp7db]

Where can I buy a bracket to hold the pole?

[@TE5LA-GAMING]

You didn't say, is that a metric Crescent wrench?

[@johnwhitford5383]

Please buy a level and a socket wrench, that was exhausting.

[@a.kumar.5760]

Thanks for very knowledgeable video, can you please share information on drill bit and size used. Thanks

[@ItsVideos]

Clever device. Not available in the U.S.

[@MrJoysiq]

who edited this?

[@HAWKSTAR78]

G'day I purchased one of these but never had the bolts with it. How long are they and what's the name for them please

[@DigitaltvhelpAu]

They're hex head 90mm 12 gauge roofing screws. See step 8 here: www.digitaltvhelp.com.au/install-tile-roof-tripod-tv-antenna/

[@HAWKSTAR78]

Digital TV Help thank you very much 👍

[@gregcoles401]

Not a word

[@PatrickGuerrisi]

Can you do a video on a colorbond roof please?

[@paulaction5957]

Even easier just lift existing tech screws. I use the tile mount on tin as the lip keeps it steady.

[@PatrickGuerrisi]

if you ever do one are you able to record it? I would like to see it in practice

[@oldguy8177able]

yeah this guys a wally

[@glotek1]

Hockey stick mount is much easier

[@boris9331]

But has limited positions, and also limits you to having to mount it on bargeboards which are never mount to bear any load. I use valley mounts if there is a valley