How To Install A Touch Plate Script In Mach3

[@Leomgrb]

Your videos are always the most accurate info. I appreciate you putting it all out there.

[@corvetteguy50]

Thank you for your support. I'm glad to have helped. Thank you, Vince

[@ricardoperez1034]

Sent Vince an email for the script and he got back to me in what seemed like less than 5 minutes. Had a feeling my script was trash, and it was, but it was double whammy having to work the ports till I got the digitize signal. Got it working now though, thanks so much for the quick response!

[@corvetteguy50]

Thank you again for your support Ricardo. Vince

[@davesdrone3125]

Hands down the best customer service ever, which is demonstrated by how useful and helpful these videos are. This is why I am a repeat customer! Can I get a copy of the script and wiring diagram, I will be doing my limit switches and touch plate this weekend!

[@elpee519]

Great video! I'm still learning and working on setting up my machine. How can I set a specific location for the machine to go to before it starts its script? Appreciate any advice, Thanks!

[@corvetteguy50]

Thank you for your support. Are you using offsets? Here's my video discussing how to set them up.kzbin.info/www/bejne/q2nSd6SDhs6nb6c This would allow you to do it after configuring an offset to set tool height, and then click on your auto tool zero button. Thank you, Vince

[@pierregoosen4490]

Thanks corvetteguy50. Great video and thanks for the script.

[@corvetteguy50]

Pierre, thank you again for the the kind words, and support! Vince

[@patrickherforth9869]

This is great info as I am experiencing touch plate issues. Whats happening is my z axis is going to the height I set before it goes down to the touchplate. The led lights up in diagnostics when I touch clip to touchplate but I notice the light flashing Intermittently when I clip onto my tool bit. Not sure what going on but I am very frustrated. Worked fine before I had to change out my drive. Any help will be appreciated.

[@corvetteguy50]

Thank you Patrick for your support. I suggest testing the connection at the spindle's end for proper conduction. I apologize for being vague, but without seeing the system, or your setup I'm essentially a mechanic working on a car without it in front of me. I offer consultations using Team Viewer for diagnostics for issues like this. Thank you, Vince

[@dindodayrit1834]

Hi Good Day, I have just finished watching your video, im new to cnc and mach 3 and learning how to use machine and software. id like to thank you for this informative video. from where i could download the script in the set up of auto tool z. God Bless

[@corvetteguy50]

Dindo, thank you for your support. Please send me an email, and I'll forward it to you. Vince

[@dindodayrit1834]

@@corvetteguy50 hi, if i will not be asking to much from you, my email address is [e-mail]. i dont know where i will get your email address. i have click your username at it diverted to creating an outlook account which i dont know how to use it yet.

[@dindodayrit1834]

@@corvetteguy50 hi, thanks [e-mail] is my email address.

[@TxStang]

Thank you , very informative !

[@corvetteguy50]

Craig, Thank you for your support. Its greatly appreciated. Vince

[@matt_803]

Thanks for the great information! I also just sent you an email. Keep up the great work!

[@corvetteguy50]

Hey Matt, thank you for your support. I really appreciate it. I forwarded the script. Have a great weekend, and please be safe. Vince

[@hennypoort9395]

Hi Vince, I would like to have your script also. Thank you

[@corvetteguy50]

Henny, thank you for your support. Please email me, so I can send you the script. Have a great weekend! Vince

[@vigenboghossian6452]

Hi There Could i have copy of the script for 3axis please , also i would like to ask is soft max and soft min is cnc table size or not

[@corvetteguy50]

Please email me. Thank you, Vince

[@perro0076]

Hi. This seems to be only for the Z axis. Is this correct? What about X and Y?

[@corvetteguy50]

Perro007, thank you for your support. The touch plate script only requires parameters for the Z axis as its the axis to control the tool height. Thank you, Vince

[@perro0076]

@@corvetteguy50 Yes, thank you very much for taking the time to reply. I gathered as much after digging around the Offsets page. I saw there are only means to set the thickness of a Z Gage Block Height (I thought it was spelled gauge!! :-) ). I guess setting up a touch prove for all 3 axis is something Mach3 can improve on. It is a very mature product so it doesn't bode well for it. I did have it with a Duet controller but the controller at the moment is only for open loop systems. There's a 'I'll Do It Myself' guy here in KZbin that has a script which I'll try out once my system is up and running. I am a bit disappointed with Newfangled that they have effectively outsourced their support to us consumers, yet they charge the same for their product.

[@chestergt7765]

How do you set up a pickup location for a stationary tool setter?

[@corvetteguy50]

Thank you for your support. There are actually multiple methods based on preference. Typically the coordinates are added to the script. Thank you, Vince

[@chestergt7765]

@@corvetteguy50 thats what I was thinking. This honesty seems a lot easier than I thought. Thanks for the gas reply. I've been watching a lot of your videos lately. Do you have a Facebook group?

[@corvetteguy50]

No Facebook as I have a KZbin channel. If you require additional support you can can email me direct for additional paid support. Thank you, Vince

[@jimcroyle7249]

Thanks

[@corvetteguy50]

Jim, thank you for your support. I really appreciate it. Glad to help. Thank you, Vince

[@jeannantel5503]

Hie Len I would like to have your script Thank you

[@corvetteguy50]

Hey Jean, Thank you for your support. I forwarded the script. My name is Vince...:) Have a great weekend! Vince

[@deniellemondesire7080]

Great video, possible you can send me that script please thanks , I'm working in mm instead of inches

[@corvetteguy50]

Email me, and I'll forward it. You can adjust the script to MM as shown in the video. Thank you, Vince

[@deniellemondesire7080]

@@corvetteguy50 thank you

[@patrickherforth9869]

Please send me your script.....thank you

[@corvetteguy50]

Patrick, thank you for your support. I really appreciate it. You would have to email me for me to send it as I don't know where to send it to. Thank you, Vince

[@patrickherforth9869]

[e-mail]........thank you

[@patrickherforth9869]

[e-mail] thank you

[@corvetteguy50]

Sent it. Thank you again, and have a great weekend! Vince

[@vigenboghossian6452]

Hi there could i have your email address again some hove gone missing from my emails list