How To Install A TPMS Sensor On Any Car!! / Jansite TPMS Sensor kit

[@mrgrey1760]

Superb video my friend. The instructions for this device… for a lack of better words…suck! But your video helped. Greatly appreciated.

[@raydemarco427]

"Let's take off your tire valve stem cover if you even have any" 😆

[@Samhain2323]

Great video !!! I have tried 3 different TPMS's and they are all huge !!!

[@lowKut]

Just what I needed. Thank you!!

[@curiosity2314]

Instead of using the supplied double stick tape you could use the 3m hook and loop that are used with the tollway theft sensors ;) . I was also interested in backlight time and whether you can read the panel without? Thanks.

[@cmaekkk]

legend!!! thank you ma man

[@dago4skin]

ALRIGHT ALRIGHT! GETTY UP SON!!

[@slinkydonkey]

Great thanks nice music too :D

[@angelc7984]

So it’s been awhile, how are they working?

[@tarekz6934]

Thank you , i need to buy a TPMS since my tire was damanged because there was a screw and i didn't notice until i moved my car , does this TPMS giver an ALARM once you start the car and there is one tire which has low pressure ?

[@JT-zn5mg]

yeah it beeps when it detects one of the tires are low

[@tarekz6934]

Great! thank you. @@JT-zn5mg

[@NossyDrelich]

Thank you for this video!

[@raydemarco427]

I want to know how these don't leak if these are constantly pressing on the valve stem measuring tire pressure

[@derrickoliver3835]

Thanks 🙏 a million you’re dope!!

[@Soulvideography]

to pump up the tires, do you need to remove the screws also like the sensors, or can you just remove the sensors and leave the screws on?

[@petruskap]

What appears in mine for tire pressure is 2.5,2.4,2.5… how do you change it to the actual number like 30, or 35?

[@JT-zn5mg]

It looks like it’s reading in bar, you would have to press the either the middle button to change from bar to PSI

[@petruskap]

Thanks a lot!

[@petruskap]

I got it! Thanks for the help…

[@dimitrz2000]

How do you fill air in the car ? Do you have to use the spanner everytime to losen the nut before the cap / sensor can be removed

[@JT-zn5mg]

You have to remove the sensor every time you want to fill your tire with air, and then put the sensor back on the valve.

[@spacely_]

i think the question was- do we have to use spanner for removing the sensor

[@TheGodson2000]

Yes, how else are you gonna remove the sensors if they are locked from behind🤦

[@Thomas-yr9ln]

I ordered one for a three wheel electric trike I don't know how that will turn out.

[@diegovasquez4136]

Can you replace a bad sensor with other one? You need to resynchronize ? I bought a new sensor but it doesn't give a accurate pressure.

[@JT-zn5mg]

Little late for the reply but, I don’t think there is a reprogramming feature with these if one goes bad, I think you would have to buy a whole new set

[@Johntreff]

U can replace and remap the new sensor , I have done it

[@aeokorea]

@@Johntreff방법 좀 알려주세요

[@kowaiwrld5434]

How does one reset it ?

[@gladzcm3289]

Thanks so much❤

[@kevstamc3676]

After pu and pd..I press the right button again and it highlights tp ..guessing this means tyre pressure but why does it allow me to adjust it? What's this one for?

[@loveisyors]

How do you replace the battery of the sensors?

[@jamescathcart1067]

That’s good it locks on , or it’s easy to lose one or steal them

[@revipri]

do I have to remove the sensor and redo the whole thing when I top up air in the tires every few months?

[@JT-zn5mg]

Yeah you would have to unscrew and screw them back on when you fill up with air, you don’t have to do the gold locking nut on the back every time tho that’s just for locking purposes, you can get away with just screwing the sensor on

[@revipri]

Thank you for all the info@@JT-zn5mg

[@Colonel_Mar]

So if I plan to inflate, I can unlock the security lock at home, then go to the gas station, loosen the sensor like a normal cap and then inflate, lock it and double lock at home?

[@sahmedt9]

Decent but threads are so short half my valves thread show

[@JT-zn5mg]

Yeah they do that because it only has to thread on enough to put pressure on the shredder valve so that it can give the tire pressure reading

[@Thomas-yr9ln]

Mine didn't work on my ebike. Luckily it didn't cost much on Temu.

[@tamjeanell]

Put all sensors on one tire to read...THEN place on the assigned tires...(see other KZbin vids)....

[@NossyDrelich]

How do I do that?

[@MADArchAngel]

These lasted until winter and then leaked constantly.

[@JT-zn5mg]

Damn lol,, mine are still going

[@jamescathcart1067]

If you can give price, cost is nice, kind of nice,does tell which tire is low on air

[@NossyDrelich]

It's around 40

[@mrcalvitoo3379]

Mines only show 2 wheels

[@wilsonsimoes3019]

I Buyed ones internal, that's work but It takes a long time to update, yours do the same?

[@dakota47v8]

So the only way then that this really works is if your tpms sensors inside the tires batteries aren't dead ....???

[@JT-zn5mg]

no this doesn't use that type of sensor the fat valve stem cap sensor is what is reading the tire pressure, that's why when you screw it on it puts pressure on the valve of the rim making a tiny bit of air to come out

[@JuanSanchez-rb4qu]

Something tells me these external sensors are gonna break, or get stolen

[@NossyDrelich]

That could be, but the same could go for the ones built into a car as well. Also the same drug addict could also steal your catalytic converter, slash your tires and smash your windshield just out of spite too.

[@elmer3383]

Like how you did not gIVE A SHIT of the language.

[@TheRealJohnSouth]

Prone to thieves😂

[@njronray99]

Dont waste your money on this things ,my shows 3 psi less than my actual reading .

[@paweru4128]

Ile waży taki czujnik na kole i czy trzeba je wyważać. Czy da się ustawić inne alarmy dla osi samochodu np. przód 2.4 bar a tylne koła 2.0 bar