How To Install a Wireless Surveillance Security Camera System Canavis

[@summerhaag1898]

*I like the pan and tilt feature. great **Newest.Technology** camera!*

[@bobbydotson3926]

I liked where he said if you are installing on sheetrock you don't have to have the anchors but on a hard surface you need the anchors. I think he said it backwards. Still good info

[@LJWalter78]

Any other app for control of this system other than Danele? I’ve checked a few different spots to try to find the privacy notification and can’t. I’m not going to agree to something I can’t read

[@R.A-K-9]

How it can be wireless if you steel using cables for the camera?

[@fatmangetsfit]

Exactly!!!

[@ItsmeAndygNUFC]

They still need power, they transmit the video wirelessly. You only need a cable to a power source,

[@shirleyliu6701]

This video greatly display us how to install the system and cameras, it is wonderful. Thank you StatUpbox, looking for your more update~~

[@StatUpBox]

+Shirley Liu thanks!

[@jacobkoku6185]

Great video, please will the wireless signal drop when the camera is far from the NVR?

[@productreviewer9274]

I don't get it. So there has to be a outlet near each camera I mean how does it get its power. Isn't that more expensive having outlets put in near each camera versus just running wires

[@jaynewoodfield3418]

What's the sound quality like please??

[@hazelnejad5233]

What about if you're no good with technology etc and can't fit a hard drive and don't want to fit a hard I just want to 1 to check see who's at my door because I have a lot of delivery people just leaving my deliveries chucked on the floor and I live in quite a busy area, is there any other ways I can do this if so I'd be very grateful many thanks Hazel 😀

[@black0ut133]

But how it works when we dont use lan cable , does DVR immediately recognize and display picture from cameras when its all wireless? ..no configuration needed to display picture?

[@kennedyfranciscoperezsegur9977]

HELLO, FORGOT THE KEY OF MY CANAVIS NVR AND I COULD NOT ENTER. HOW CAN I RECOVER OR CHANGE IT? is wireless

[@joechisholm6168]

Is it okay to plug the AC adapters outside with rain/snow? I used a coupler with a recepticle where my outside spotlight is. Its plugged in and works great. But what about weather. Do these Ac adapters need to be indoors?

[@muja28]

i have not got a smart phone can i still fit this siston?

[@sheldonlev]

Wireless as in I dont have to run cables to the modem? Just mount on a wall and setup?

[@StatUpBox]

Yep.

[@510purple]

sheldonlev just watch the video you lazy fuck.

[@sheldonlev]

watched it 6 days ago :D

[@sheldonlev]

thanks

[@miguelplascencia6093]

You still need to run power cables so wireless is kinda pointless

[@magicjoelster]

It would be nice to have a video on outside installation of house such as a brick and vinyl

[@StatUpBox]

It would be same installations just have to add anchors like shown in video. For vinyl if there is wood under you would not need anchors, so it would be same.good luck

[@robertbaker9860]

Are you still here on KZbin? So, how do I connect the LAN cable to the box? Or show how to use it as a wired system. Thank you.

[@LPTLife]

Thank you for the video but I wish you would have talked more about the mobile instillation. I can’t seem to link my hard drive to the app.

[@fabinho909090]

Same thing here,did you get your problem resolved?

[@scribemanjustice2028]

We didn't see when and how you connected the camera to the NVR?¿

[@seetcas]

Hi does it support rtsp ?

[@khandaada5117]

So, the cameras are wired connected to NVR for power supply ?? And let's say I need to connect the ethernet cable to 4 cameras, and there is only 1 ethernet cable slot in the NVR, how and where do I connect the other 3 ethernet cables?? And ... let's I want a camera to be installed outside at home entrance, while the NVR is setup in the basement or living room, I would need need very long power cables as well as the ethernet cables ....right ???

[@billballoo7881]

How do you remote view from a browser?

[@kateryna800]

I still didn’t get it how it’s wireless if there is wire for each camera 🤷‍♀️

[@kritmil00]

They still need power boss :)

[@hecguevara5848]

Katya, it is wireless communication only (the images sent to the PVR to be viewed and/or recorded), but it needs electricity for the cameras to work.

[@hecguevara5848]

@@carlbelken4478 I don't think that is what Katya meant with her question. No matter how good the batteries are, you will need to replace/recharge them sometime. She probably saw the wires and wanted an explanation. Have you noticed she did not reply to any of our comments. That means she got the response she was looking for.

[@marlinbrown2236]

Katya me either 🤦🏾‍♂️

[@carlbelken4478]

@@hecguevara5848 Thank you. After giving it some thought I deleted my comment because it did not add anything to this conversation.

[@jay_kins]

Great video. I learned a lot from this

[@JamesTybirus]

Thank you! Very helpful!

[@StatUpBox]

You're welcome!😊👍

[@francoisluzemo7770]

Hello,thanks for the video.we just got the same video surveilance system but only one camera connect the three others dont show on the screen.Can you help.the screen has four windows but only one shows.

[@StatUpBox]

Have you tried switching power supplies around. would suggest disconnecting them and reconecting them again. Then doing a reboot on the system.

[@SonjaBarton]

@@StatUpBox 2 cameras displayed briefly, now none do. They don't show up when I search, either. How to fix this? Thanks.

[@cristianodapazcosta]

Hi, I'm a technician and I have a client who has a kit like this, but he lost his password and I can't reset it, can you help me?

[@theinse]

We keep getting a failure to connect to the device whenever we try to install our mobile devices, iPhone or iPad. Tried all methods, scan Qr code, automatic scan, and manually typed in device id. How do you reset the device?

[@unk1537]

I've NEVER been that guy with the dreaded missing parts......the manufacturer just forgot to give me enough screws! That's ALWAYS been my story, and I'M STICKIN TO IT! LOL!

[@danielsmith1089]

Do the cameras connect WIFI direct to the HDD base station or do they connect to my homes WIFI. Either way it would have been useful to tell us how that works. Thanks for the video anyhow.

[@iaindymock3007]

Yep, he missed a lot of shit out. I'd like to know that too

[@meverickjnphilip3790]

Does each nvr configure to the cameras in the set

[@nealwofford4883]

bought a Canavis 8 channel wireless camera system and had 2 cameras that were bad and sent for replacement cameras they have arrived will they plug and play and update with the 6 that are in place now? or will i need to change the IP Address for the new cameras to fit in the open slots can you advise or Help thank you

[@StatUpBox]

+Neal Wofford once you re start system they should automatically detect all cameras. Just reboot system.

[@Therazorschannel]

What is the model number of the modem that you are using? I just bought the canavis system. Will the system function well without the added modem? Thanks in advance. Very informative video.

[@Therazorschannel]

Sorry I meant hard drive. Thanks.

[@StatUpBox]

We use the Ac1750 got this one on amazon amzn.to/2AqM8rR yes you can, you will just loose the accessing it on the go you will only have local recording if you have a hard drive installed.

[@StatUpBox]

Here's a list the bigger the drive the more cost. Yes, you can you just won't be able to access old footage just live feed 1. 500gb amzn.to/2PpsiTv 2. 1 tb amzn.to/2N3Uh9D 3. 2tb amzn.to/2Li7cTI 4. 3tb amzn.to/2LezNJx 5. 4tb (which is maximum dvr can handle ) amzn.to/2w0hMdq

[@Therazorschannel]

Nice. Thanks for the quick reply and keep up the good work with the videos.

[@yddub111]

so, if it is wireless, why did you install cables? shouldnt it just work off your wifi ?

[@floydwilliams7610]

Excellent presentation and good camera system, I'm very please with it the only problem for me is the writing is too small on the instruction sheet.

[@StatUpBox]

+Floyd Williams Nice!

[@mikejacks1939]

Thank you just what I wanted an easy explanation of how a wifi system is installed and works

[@StatUpBox]

You're welcome

[@sylviatrevino6974]

Hey I understand when you speak ..others. I can not understand ...thank for speaking slow ..also I would like to know how to connect a wired DVR to wireless security cameras with out internet wifi or ethernet cable. Could tell explain how to do all the set up ever reset DVR. Thank you

[@anthoniregis492]

Indoors with wall to wall rooms within the apartments as wall obstacles for the wifi nvr, within 30meters wifi range of the ip camera range is still okey?

[@StatUpBox]

where the video was made 2 out of the 4 cameras are inside the house and they work well.

[@junaid7404]

do we have any system through which we can monitor from 3, 4 km?

[@lesliegrier1058]

Will security cameras work at night without the red light?

[@StatUpBox]

it should need the infrared lights to preform at night time

[@lesliegrier1058]

@@StatUpBox How to tell if the camera is fake? My neighbor has one mounted on a 2x4. So messy 🤭

[@monicabrown8074]

I keep losing a camera . Now it says not connected. And all my other camera are connected. I don't understand

[@magicjoelster]

Can you make a more thorough guide to setting up for recording this Manuel sucks and they don’t have a very good website either

[@canavisdirect6029]

Welcome to write e-mails to [e-mail] if you have issues with setting up recording, we would like to help you solve this problem as soon as possible.

[@abdulwadudmbarak9057]

wow it's really helpfully

[@Onceinawhile29]

Does the hard drive come with the cameras or you have to purchase separately

[@fatmoney123]

Nope. Hard drive sold separately.

[@eliwebb384]

Do you have to buy HD separate or is it included with most wireless systems?

[@catherinegonzalez6328]

how did u get that screen on your monitor? what did u click?

[@StatUpBox]

It's automatic, you can left click either single view 1 or 4 or the amount depending on camera.

[@floydwilliams7610]

I purchased my cameras about 14 months ago and still working fine. How do I change the default SSID/Password in my NVR system and which Wifi Channel it should be on? Do I change it to my router wifi name signal and password in place of the default settings? In red states, "According local law choose Wifi Channel. Modify SSID/Password need re-Match." Any assistance is truly appreciated!

[@StatUpBox]

Right click to enter NVR menu--System Setup--System--User Click “Modify” on the bottom right of interface.Enter new password in column of “New Password” and “Confirm password”, click “Save”, then changing NVR password is done.

[@floydwilliams7610]

What about the Wifi Settings for SSID/Password and Wifi Channel? I have a Linksys Router AC5000.

[@StatUpBox]

this information is for the cameras signal, you dont need to change it. changing them may cause your cameras to not have signal meaning no image. thinking that cameras are marketed to be sold for all around the world. it can be understood that it can be a generalized way to comply with different countries regulations. the important thing is that they are working correctly.

[@floydwilliams7610]

Thank you very much for confirming the system is setup right, we are planning to upgrade in the near future since everything is going well. How my wife can be added from her android phone app for remote viewing of the cameras?

[@StatUpBox]

She can use same login information as your self that will not interfere. you can only add one user per device on the app. But multiple people can watch using same login

[@kshankar102]

any restriction on adding camera in this software .... like only four or many

[@canavisdirect6029]

That depends on your NVR box, 4ch NVR can only support 4 cameras and 8ch NVR can support up to 8 cameras.

[@Fellowrser]

Great video man just one question what do I connect the box to how do I connect it to my to or computer which cable is it the hdmi?

[@StatUpBox]

you can use vga or hdmi cables for a tv or monitor that is to watch it live via the dvr box. the important thing is to connect it to the internet using a Ethernet cable. and then you will be able to watch it on the computer or mobile device.

[@Nobody-uq2py]

Can you look at the cameras with your phone and monitor at the same time?

[@StatUpBox]

Yes

[@elleandrada2365]

But how much does it cost

[@Harley-bq2sx]

Mine dont work on my android just the monitor

[@jamestidwell5802]

Excellent!!! Thank you!

[@StatUpBox]

+James Tidwell thanks!

[@francisatienza8974]

thanks for the video sir please could u tell me what is the oranje device and what is for ?

[@StatUpBox]

I would believe you mean the stud finder amzn.to/2vZVN5f , its used to find the studs on the wall or depending on your device it can find wires behind the wall as well.

[@jocelynmaylaa4611]

what is the wifi range??

[@suryanarayana8306]

How much

[@login7164]

Such docile tones

[@KDA1342]

Can you link me to where you got that hard drive that you have??

[@StatUpBox]

link in the description. amzn.to/2H53Keh here are some that i have used, it all depends the capacity and budget, the bigger the capacity the more days it can record. with my 250gb we can record 14 days.

[@deebocj]

Very good video.

[@StatUpBox]

Thanks!

[@j0s3lu1sn]

Tengo problema con las cámaras canavis, se reinicia cada 30s en cada momento, como soluciono esto pues acabo de adquirir el equipo cae menos de un mes o sea en Marzo 2018

[@StatUpBox]

Es bueno verificar que toda las conexiones estén bien. Desconectando todo y re conectándolo. Y verificar que la fuente de energía no esté defectuosa. Contactando servicio al cliente si persiste el problema.

[@mohanedabdalla7562]

thank you for Installation Cameras IP wireless

[@StatUpBox]

your welcome!

[@FunChannel65]

amazing video

[@meverickjnphilip3790]

Can I still record without harddrive

[@StatUpBox]

No, you will need a hard drive.

[@ashokbhaisain802]

how we install a without lan port wifi cemera

[@abdullahk9606]

Has anyone used these cameras? How good are they?

[@brewsterly2927]

Not available :(

[@mare6638]

How to connect it to the router that's on the other side of the room? Dvr is connected to smart tv, can you somehow forward the wifi signal from the tv to the nvr router? Or is there any remote ethernet cables?

[@StatUpBox]

You can try with a longethernet cable they are cheap for 50 ft under$10 or even 100ft cheap amzn.to/2s8DutM

[@mare6638]

StatUpBox i don't wanna drill walls, house covers 340square meters :/ touter is on oposite side... but if i put it off from the middle of the hause camera's won't have great signal...

[@mare6638]

StatUpBox if i wanted to drill, i would rather install cctv/dvr, oh yea i meant dvr in 1st comment :/

[@StatUpBox]

You just need to connect NVR to router the cameras don't need to be close to the NVR you only need the TV for initial setup then it does not need to be connected you can watch it on mobile or tablet or pc. We don't have a TV or monitor connected to it we watch everything on mobile.

[@mare6638]

StatUpBox oh, thanks, so when i open static ip adress i can view cams from 192.168.24:8080 for an example while connected on the same network as cameras? Nvr is just a recording device? So it has nothing to do with cams?

[@the1trish1]

Thanks so much your the shit.

[@profbell7931]

Great! 👍🏽

[@nicolasfreeman2065]

How do you reset a camera which stopped working after 2 hours.

[@StatUpBox]

have you tried rebooting the system

[@canavisdirect6029]

Welcome to write e-mails to [e-mail], we would like to help you solve this problem as soon as possible

[@pooyaja]

Distracing flashing backlight

[@D.Frasure]

Why even use the word wireless in all the descriptions of "wireless" camera's? just saying every where we go we see wireless but all installations show wires going to the camera. what's wireless about this system or any other system that says it's wireless? EDIT: Just look for wire-free if you don't want any wires. wireless means wires and wire-free means no wires.

[@black0ut133]

But you need to feed the cameras.. to give them electricity to work

[@purandharesribeby928]

Thanks

[@StatUpBox]

You're welcome

[@nancyosborne-webb646]

Installed it myself without any issues. The wifi signal is great even kzbin.infoUgkxE_D_sddGAdiVUKp7PkkmyxO7bRtgqmk5 when the router is located far away. I really enjoy the night vision feature that allows me to see clearly any activity near our house (mostly cars and wild animals). The motion detection is helpful to me as well to monitor what happens on our front.

[@informant3267]

I don't think my law enforcement relatives or friends would like the reading of license plates too much! It's been a brave new world for some time so we better get used to being watched and listened to even when your in bed with your better half.That one really irks me. well done video.

[@StatUpBox]

lol. We meant more if someone intrudes to your home in a vehicle. Thanks

[@hopehouse9258]

why confuse me with adding 'wired' options as you're going through the example? No Ethernet cables.

[@barbarajohnston4915]

my system keeps saying offline. how do I fix it?

[@StatUpBox]

have you tried disconnecting everything and plunging it back on.

[@IronSharpensIronGym]

1 push up every time he says "go ahead"

[@thomasedwardking7286]

"Because you don't want to be the one guy with the missing parts" XD XD XD

[@meverickjnphilip3790]

My system showed private and disconnected

[@tc4lifems.divatc532]

I don't have an harddrive

[@Obi1_Ab]

Its not wireless

[@tooneboone3869]

Obtain System install and turn on, uhoh, maybe a few steps missing. Oh- but you know all the rest don't you?

[@floridaangler5904]

Informing but those lights in the background are annoying

[@StatUpBox]

thanks and lol at same time. yeah when we speed up the clips, it looked all techno mode.

[@solid_spec]

Those rgb lights are annoying lol

[@StatUpBox]

lol

[@dh4923]

agree, i damn near had a seizure watching this

[@meverickjnphilip3790]

Ok thanks so it could record into cloud

[@DragonworksAnimators]

That’s not wireless since you have to plug it in

[@clarkkent7498]

I'm missing how the wireless cameras get setup on the home network with IPs

[@danielsmith1089]

He went over all the basic common sense things but did leave out how the cameras connect to the network. Do the cameras connect WIFI direct to the HDD base station or do they connect to my homes WIFI. Either way it would have been useful to tell us how that works. Thanks for the video anyhow.

[@Coquillages]

Calling it wireless is misleading. Should be called "not as many wires".

[@The_Black_Anarchist]

No wireless

[@prakashvictor5943]

CAn we see in mobile live video when we are far away from home

[@StatUpBox]

you can use wifi or mobile data to watch, if using youre homes wifi all depends how far your signal goes, if using data anywhere where you gets data coverage and or wherever you get wifi signal

[@prakashvictor5943]

StatUpBox You mean phone should have net connection then we can see anywhere from worldwide

[@canavisdirect6029]

Yes! You need to get a net connection on your phone, so you can get a remote view anywhere from worldwide.

[@hareshking92]

good bast

[@realrecognizefake8278]

All these wireless devices that need wires to stay functional 😂😒 Solar powered CCTV cams are wireless hopefully 🤷🏿‍♂️

[@mlife0125]

Good video

[@StatUpBox]

Thanks!

[@algerienews3696]

I don't understand how so called wireless, you still have cables to plug in, and then worse to remove the top of dvr,,, and lost interest in minute... sorry won't recommend wont buy ... smart phone connect to wifi in one click... why cam don't do the same, click once, and let it run.

[@anthonyf3957]

Thi music is appalling.

[@stevewyche5232]

stop saying bad boy

[@1993Revhead]

Obviously a wire running from the camera 🤣

[@swag_2199]

How is this wireless 😂😂

[@sagarpayasingh240]

Sir plz Hindi

[@andyb7339]

It would be more wireless if the cameras had some sort of internal battery and NO NEED FOR WIRES lol