HOW TO: INSTALL A ZONE SYSTEM!!!

Installing a Honeywell zone board and wiring all zone dampers. Step by step. Hope you enjoy and God Bless.

[@williammay5322]

Nice instructional video! I'm retired now after 45 years in the HVAC&R business and the little trick you demonstrated with using the two conductor control wire for a wire tie to tidy things up a bit is an excellent idea! Better than tape, zip ties, or nothing at all! We are all constantly learning new ideas and methods to make the industry better for everyone, good job, thank you!

[@HVACTechTips]

Thank man! Glad you liked it. To help me out, please subscribe!!

[@michigantrapper5687]

Just had this system drop in my lap today, 1st time I've ever installed one. Boss said Goodluck and sent me out the door. Thank you very much had it up and running in no time. This video saved me today. Not sure I'm gonna tell that, I'll just let him wonder. But thanks again

[@robbrown3941]

Dude I’m an new hvac tech. These things scared crap out of me. Now i have a much better understanding of it. Thank you so much. I should send you a check.

[@darthsailormoon4831]

There is still lots to learn that are important like controlling damper speed which I'm still trying to figure out on mine.

[@JulesODwyer]

Great Job and good Video I'm 63 yrs old been in the Field since 17 and always Learning everyday ,just like I used to say I've seen it all in this Industry but still learning and admire all the young guys coming up and keeping the Trade going on

[@joseluisflores6170]

Just new in the industry if you have a work email that would be helpful, dampers are complicated buisness

[@HVACTechTips]

You can email me @ [e-mail]

[@benjaminbowkley2664]

I'm installing my first zoned system tomorrow. Your video helped me a bunch. Thank you.

[@victorortiz5761]

Hey man I didn’t know much about a zone system before watching your video because I don’t commonly run into systems having zones. You did an awesome job explaining this. I have a service call tomorrow for a zoning system and I’m much more confident going into it after watching this video. Way to keep it Simple!

[@ynavarro83]

I’ve been working in air conditioning and refrigeration for over 20 years, and I just wanted to tell you that this is a video that has really helped me a lot. I’ve watched this video twice, the first time I watched it I thought it was too complicated and would turn side jobs down that involved zone dampers. So I decided to give it another try and now it seems so easy, I’ve been watching more of your videos and just wanted to let you know that you are very professional and one of the best technicians that I’ve came across on KZbin . Thank you for uploading videos like these that really help people out.

[@pnajera3938]

Appreciate the video, great explanation on zone system. Thanks for sharing 👍

[@genegroundjr3502]

Good job I don't work with sound systems very often so I really appreciate your video. Very kind of you God bless

[@petersaadtube]

Thank you so much. This is VERY helpful as I try to switch from AprilAire zone board to Honeywell

[@megamanfun]

I have been looking for a video like your for months. Thank you.

[@mikefreedom5612]

Thank you so much, great video with a good explanation! All the best!

[@tonyroan75]

Best video I've seen. Thank you, Sir!

[@wayne5607]

You have no idea how much you helped me!!! Thank you for an awesome walkthrough! If I watched this yesterday today wouldn't have been the day from Hell it was! Thanks again!

[@laurajohnson8402]

This literally saved me!!! Thank you for posting.

[@stoichiometry147]

Very much appreciated! Keep these coming.

[@stevejuniorfy]

Thanks Bro. You got out of a jammer. been doing this for 5 years with the same employer and like Yosemite Sam never ever is there any training. I get it now. Thank you again

[@HVACTechTips]

I’m glad I could help! FYI, I think you should find a new employer

[@SoCaL884]

Great video, thank for taking the time to show us the way!

[@user-bl7on5vo3c]

Amazing stuff, great job explaining the process, thank you for this video.

[@standtall7646]

Still a good video, today in 2023~ Thank you!!

[@jaimemartinez6028]

Thank you so much for this video I have learned a lot.

[@carlmumford6889]

Thanks for the information. Great video!!!!

[@carlosluna181]

Thanks alot you made it real easy to understand. Great video.

[@miguelquiroz1550]

Thank you very this informative video! Great content!.

[@hkhsm359]

Nice job. Keep posting videos.

[@premopremo9569]

Great video, helped me on my 1st installment.

[@sixtofigueroa499]

Loved your presentation man. I’ll be installing my HZ322 tomorrow and this helped a whole lot 😊

[@HVACTechTips]

Awesome. I'm glad it helped you

[@coolbrezze2052]

Man, I appreciate you tremendously.

[@luisrivas6764]

Thank You! Very helpful video!

[@mikevictor8390]

Great video and explanation!

[@grayac6802]

Great video greatly appreciated!!

[@joseggarcia1602]

Awesome video well explain

[@baldemarvenancio]

Hello sir.i want said thank you for your time and is a good video

[@rgg1100]

Thank you, this video was really helpful.

[@stevencarrillo3615]

Thanks that help me a lot but you made look easy learned a lot.

[@alvaronajera4488]

Thanks so much Very easy explanation

[@edgar20109]

Great video!!!

[@martinwoods6716]

Great Video, explains And shows more than been exposed too...

[@HVACTechTips]

Thanks so much. Let me know what type of video you would like to see next. Please like and subscribe!!

[@ryandaddy2044]

loved this video man. keep up the good work

[@raycontreras16]

Good job.

[@cd-stephen]

Excellent vid. How many dampeners can u run on the transformer. I have a setup that has no separate trunks for upstairs and downstairs so would need to dampner each supply run

[@guruouroborosbukelenakamot8498]

This is so cool. Thank you so much. I have got Bosh/inverter system, are there specific zoning board for different furnaces?

[@gtownhvac1640]

Nice video 👍🏻

[@davpatino1993]

Thanks so much for this video.

[@nelsonr1001]

Awesome video! Someone forget to put the door panel on before brazing ;)

[@John-wc7sh]

Hi nice video. just a question about the low limit setting you covered in the section on the advanced settings. You mentioned wanting the heat pump to run on cooler days where the outside temp was lower. But isnt the point on that low level limit setting to stop cooling and prevent coil freeze when it reaches the discharge air temp setting. I am wondering because i have mine set at 45 and noticed that when outside air goes below 50 my system seems to go to the aux heat. I have heat pump checked out and it is fine but seems to shut off at 45 ish.

[@joecox9958]

thanks. it would be better to show overall design, each damper controls sqft and floor#. I see you you have four zones but HZ322 is 3-zone kit? you also has AC and bypass damper right? you can add a list for these info also component model# and link.

[@fighkb]

Thanks for a good video

[@brandondavis8494]

Good video bro

[@slacky4358]

This was a good video thanks bud

[@jeffreyjohn2037]

The zone board has slots, top and bottom to bring wires into tie in with a place to use a pull tie to secure them.

[@glennoc8585]

Very advanced boards now with thermostats even room based Bluetooth now. Here in Australia some zone control units are plug in to 240 with onboard voltage control and the damper/zone motors use cat5 or RJ connection for signal. Does the bypass use a pressure sensor and motor gate or is it just a passive spring return based in duct pressure? Its only really an issue on multi level systems where you get temperature fluctuations.

[@MrManPersonMan]

Question I have a 3 story home with 2 ac units one ac controls 3 zones and the other controls 2 each zone with its own thermostat right now it uses an old trol a temp Honeywell cronotherm iii. I am looking to upgrade the thermostats what is the best way. Any thoughts

[@joesalvatore4221]

This guy is a genius!

[@HVACTechTips]

😂 👍🏻

[@petesingh292]

When you add another transformer , do you remove red power wire from the equipment side ?

[@marconator3896]

Thanks a lot I am junior tech and this is amazing help 4 me thanks

[@HVACTechTips]

Glad it helped.

[@juantoledo8595]

thanks for the video

[@saintpete3573]

Great video; very intuitive! Wish all videos were this detailed. The only other thing I wanted to see was how to adjust the dampers to full closed since I think my dampers might be leaking a little bc I can feel a little airflow going to my second floor when I have zone 1 on my first floor ON. I thinking after 8 years it might slipped and might not be fully closed as I feel there’s approximately 20-25% leakages on the closed zone.

[@raycontreras16]

Some times they allow dampers to be partially opened for Static pressure relief.

[@carloshumbertocallejas4027]

Great man.

[@fayco1]

Thanks for that video bro! I appreciate you, I see you’re sweating and I’m guessing you recorded that when it’s hot asf up there. This video definitely gave me an idea to what to expect on a zoned system

[@phillipjoy8191]

Good job

[@hafidboston9674]

Great job

[@HVACTechTips]

Thank you

[@kronichaze]

i always break the Y with my pan switches so you dont lose fan in case of freezing, not to mention heat in case of switch failure

[@John-wc7sh]

Quetion on the advanced settings. As you discussed low temp setting you seemed to indicate you were lowering the stiing because you wanted the heat pump to continue to run on cooler days and lower outside temps. Isn't this limit setting really to prevent freezing in the coils by turning off the cooling when the discharge air temp temp at the limit the temp of the air

[@christianalba700]

I need help, so I see that on the right side of board the thermostat on top has C wire and the bottom t-stat is doesn’t not have the C terminal connected. Can you explain why? Thanks!

[@ricardogarcia-eb4op]

Nice thanks

[@kennethwright2236]

Bro this helped me alot lol thanks brotha

[@tomassalas7196]

thank you it helps me a lot

[@HVACTechTips]

Your welcome. Glad I could help

[@solvintx]

You rock!! Thank you

[@HVACTechTips]

Thank you. Please like and subscribe. Let me know what type of video you would like to see next

[@robduncan7747]

Does one zone take priority over the other? Like if zone 2 is running then zone 1 calls for heat does 2 shut so 1 can run?

[@cleygonzalez4759]

😍😍😍 thanks man!!!

[@Carlossoto-rg5hh]

Great Video man

[@HVACTechTips]

Thank you

[@pkvo20]

Will the HZ322 work with smart thermostat that requires C wire?

[@bogdanarsene9602]

Why did you set the board on Heat Pump when the thermostats don't control a reversing valve?

[@armandopineda5148]

Wow. Thanks

[@sergiodoordie319]

thanks man

[@JohnnyJr396]

Great video bud. Can you answer a couple of questions? 1. So as the dampers close off , it’s like choking down the duct..... is there a static pressure sensor to control the bypass damper? 2. Does the DAT sensor open non calling rooms to regulate the dat when it gets near the limits? 3. Are the actuators open or closed no modulation? Also are the spring return? Thanks

[@johnperry7883]

Usually a bypass damper is weighted and opens and closes as needed.

[@hinojosa552]

Do those damper motors have a ground or neutral wire? I see you only installed 24volt wires , didn't mention any ground wire or common neutral wire..

[@Honeyman76]

How do I know where the air sensor goes? I see techs here wire to the outdoor unit. I haven't seen it wired above the evaporator coil before. cheers

[@IdahoFluke]

what did you do for the return / make up air? is there one on each floor? or is there something that needs to change when doing a zone system

[@HVACTechTips]

All returns are the same as a normal system. The only difference is you will need a bi pass installed. Which is a duct that comes from The supply back to the return

[@wildomarsanders7506]

Informative video. I have a question, I just purchased a home and the sensor we as not attached to any hole it was just left out. Does that affect the functionality of my system?

[@HVACTechTips]

No. It will not effect it but it will not be able to cut off the system if the air temp gets too cold or hot

[@mr.breadNwater]

Thanks for the video, very informative. Looking to adding this to my system at home. I have a 2 story 2200sq.ft. home. What dampers did you use? Do you still recommend them? I could see they're also honeywell, what's the model number. I got the HZ322 on the zone board already. TIA.

[@HVACTechTips]

Honestly after a few years since this video, I really like EWC over the honeywell

[@HVACTechTips]

If you choose the Honeywell there fine too. The model number will relate to what size duct it's connecting to. So example, if it's a 12" duct, it would be a Honeywell ARD12. Just change to number for the different sizes.

[@SombraLocs]

How do you size the bypass damper and what opens and closes the bypass damper?

[@ethanschumacher7393]

Hey thank you man I have a question I have a wood hot air furnace can that zone board run 2 120 v blowers somehow

[@HVACTechTips]

If you have 2 separate wires to control each blower it would

[@paulp.8748]

Would you recommend doing zoning on single-stage furnace? I read it won’t reduce your bill. But I have some rooms that are colder/warmer than the others

[@HVACTechTips]

Paul P. Yes it will definitely help with the hot and cold spots. Won’t be a huge diff in the power consumption

[@paulp.8748]

HVAC Tech Tips Is there any specific equipment you would recommend?

[@HVACTechTips]

I really like Rheem and Trane. You can’t go wrong with either. Rheem will be a little cheaper

[@rr1882]

Hey man quick question, how would you wire 2 zones on one thermostat on cooling mode? If you know would be able to post a diagram

[@rr1882]

Thanks!

[@wendyagelvis984]

what about the return and Barometric Bypass Damper calculation

[@modestogonzalesjr9626]

I have a Trane system, do I need a Trance tech to install this?

[@TheTekwiz01]

Question for you, can any standard furnace be used to zone or not?

[@HVACTechTips]

TheTekwiz01 yes. Any system, electric or gas.

[@cbaykal001]

I have a carrier 4 zone unit with a Carrier branded Thermostat and Zone control board. I am due for a change out of the entire unit as it is 16 years old and having problems. If i change the unit with another brand ( American Standard or Trane) Do i need to replace the zone board or will the new unit work with Carriers Zone board? My dampers and actuators in good working condition.

[@HVACTechTips]

No. Your zone system will work fine with any system you install

[@WirelessDesigner]

My HZ311 doesn't come up at all, no light, however I confirm we have 24v in it and all thermostats are coming up on their screen, what can be the problem? is there any fuse or reset button on this device? tnx

[@tulio3571]

Does the damper completely shuts off the air to one place when closed ? In my second floor i have 3 bedrooms but sometimes only one bedroom is been used ,is this system helps to have complete control of where the air goes , i have central ac ,and was thinking of mini splits for this reason ,control of which rooms get ac ,and will this help save on electricity or this is not the purpose of this system ? thanks

[@HVACTechTips]

These are more in sections or (Zones) like up stairs and down stairs. Not really for room by room. And mini splits are expensive especially if u are putting one in every room. You would be alot better off going with a zone like this. U can set them up also to do like left side or right side of the house

[@HVACTechTips]

And it sounds like you have a damper problem if there are only one room cooling and others are not. Or it could be wired wring. Check if when you turn on the down stairs tstat the up stairs rooms start to blow then

[@SuperNascar48]

Couldn’t you use the low voltage out the furnace C for the board

[@mattisonwhittaker8019]

Use wire spades for low voltage better connections on transformer

[@emilioalaniz7263]

On the 2 wires on the zone..is it common and close Is their a jumper needed for open

[@HVACTechTips]

It depends on the type of damper. These dampers are normally open so it needs power to close and common

[@daffybull5277]

Can a single next control the Honeywell zone board with zone dampers? Do you have a video for that?

[@HVACTechTips]

No. For it to work correctly, there needs to be at least 2 thermostats

[@jackbauer8699]

So is zone 1,2,3 For each floor? I have a 3 story house and my basement doesn’t have any ducts. How am I supposed to bring the ducts down to the basement?

[@HVACTechTips]

Normally when a house is 3 stories, you can zone 2 floors and have a 2nd system in either the attic or basement. So you can zone floor 3 and 2 and have a single system for the basement. It would be very hard and expensive to get ducts down to the basement from the attic

[@timothygilles494]

Remove the jumper on rh and rc they become seperate circuits.

[@OhMar1210]

Great video. Question. I have a manifold that goes across halfway done the house. About 20’. Do I have to put the Air Sensor right before the Damper or close to the beginning of the manifold, close to the air handler? Thanks 😊

[@HVACTechTips]

Close to the beginning

[@OhMar1210]

Thanks !

[@jae_ali]

Question: what could be the problem if your zone board is receiving power from the outside unit but isn't sending power to thermostats?

[@HVACTechTips]

The zone board does not send power to the t stats. But I think I know what your meaning. If the zone board is not detecting when the thermostats are calling for cool or heat there’s either a problem with the wiring, or the board is bad. Make sure your thermostat is calling for cooling and Check the wires coming into the board at Y and C at the same time.