How To Install Aftermarket Radio in (99-04) Mustang

[@stryker819]

Omg that was the most easiest and fastest stereo install i have ever done. Thanks for the info !!!!

[@gannongraysen9749]

i realize it is pretty randomly asking but does anyone know a good place to stream new series online ?

[@chrisdavis7883]

my 03 gt has the 3 harness in the back of the radio too. your how to is the easiest ive found on doing the wiring. thank you!

[@machnone7967]

Thanks man i'm just happy my video helped someone cause it was confusing for me to figure out

[@chrisdavis7883]

@@machnone7967 i put my pioneer in today and it went extremely smooth cause of your video. Im not real proficient in wiring, so thanks again!

[@sethconover9904]

BRO THANK YOU. You're the only person I found with the same setup as me that knew how to wire it up

[@machnone7967]

Seth Conover haha ya mom

[@duanepierson4375]

I know this video is 5 years old, however on 03 GT 5 speed w/ a Hurst Tee handle I had my local Tailor put a Zipper up the back of the boot. Now unzip the boot and the shifter goes right through.

[@tommonteforte1816]

Ok listeners! I have a 2002 mustang gt with Mach 460 system . Factory radio has 3 plug harness. This is where I got confused! The third wire harness with the 3 wire from factory radio will not need to be used at all . Just follow this videos steps and there you go ! It works!

[@tomconnor7135]

I have the same set up and am lost a little bit. My Pioneer harness has no blue/Red, has an orange/white. And the guide I was using doesn't say to use the step down converter? Any help?

[@prohealthsingh2125]

thanks for the video! i installed a single Din Kenwood stereo in my 2003 Mach1 with Mach460 sound system.

[@machnone7967]

Happy to help

[@29ifyfelix]

Hello can you please send me a link to what kit you used to install the stereo for single din, I have the same exact thing

[@29ifyfelix]

Please and thank you!

[@genericdude6551]

Gotta be careful because some stock radios are not the factory installed premium sound system. The 3 multi-conductor connectors are a dead giveaway. The non-premium setups only have 2 multi-conductor cables. This video shows the premium system. Makes a difference when ordering cables! This video doesn't show the complete cabling that needs to be done. The cable kit he needed was the Metra 70-5701 or the Red Wolf premium sound wiring kit. Plus some after market radios have a DVD player that has a long green wire in the radio cabling that needs to be connected to the parking brake. I haven't found a video that shows how to connect it.

[@29ifyfelix]

Can you send me a link to what exact stereo kit you used, the single din one, because I've seen so many types

[@SawBlood45]

Lost all my tools from my last stereo installation, put a double din with bt mic on a 2000 F150. That was alotta fun. Now my Mach 1 needs the upgrade. I dunno if I should go buy another crimper and caps or just let crutchfield wire em for me like a lazy ass.

[@selfundone]

I was totally following until you got to the 12 to 5v step down. I don't know where that came from. I got the metra 70-5519

[@jacobpowers6553]

What did you do if you Didnt have a stepdown

[@selfundone]

@@jacobpowers6553 was a while ago. but I just ignored it. I think when i got the metra it came with instructions, or I just used this video. I honestly can't remember other than it wasn't really that difficult. and the metra kit was all I needed. was essentially just a tedious process of matching up the wires. and the metra fit wasn't perfect. there was a bit where i thought I ordered the wrong part but it fiddled with it A LOT , and got it in.

[@refinedautodesigns]

I have the mach 1000. Same deal to install?

[@jimmymaupin4762]

What about replacing the three black ones under radio buttons switches any thoughts

[@bbelitere]

So my read ports are different cuz it’s a different unit obviously; any idea which exact port you plugged the white one into? Red went to the sub and the white went ?

[@AXEMAN-od8go]

I don’t have a blue and white wire from the harness only the antenna wire how do I make this work

[@seabassgt7998]

2000 and lower has a completly different radio. Its 2 single dins so dont plan on easily swaping a double din in there

[@juanace2541]

This is the problem I'm having

[@andrewcunningham2782]

I am so confused so sorry for the stupid question, I have never installed a radio before and am trying to do mine in a 2001 mustang gt. Do I need a wiring harness or is it possible to do it without? The new radio only has one big plug for power etc, but the old one has a few

[@kevvodinero8785]

Yo bro what is the size of the radio? There is so many size options 🤦🏻‍♂️

[@BossHogg302]

Is the step down for the amplifier pop? If so where did you get it?

[@machnone7967]

Order it off crurchfield I got it at a local stereo store

[@Jcscmnnrp]

what radio is that?

[@chrissgarage2011]

Hey man I really need your help I just bought a Mustang and only the front tweeters are playing nothing else the amps are good I took out the radio and saw that the wiring as a little Miss configurated if you see this could you please get back to me ASAP please

[@chrisroberts953]

Hi MachNone do you still have the part numbers for the wire harnesses and mounting bracket I’m literally getting the same radio but idk where to get those other things

[@genericdude6551]

If I understand correctly, the stock Mach amps have high and low pass filters for feeding the tweeters and woofers, respectively, so the crossover settings aren't necessary?

[@bbelitere]

So I dont need that crossover piece ? Just got my wiring harness in and I don’t have one of those

[@genericdude6551]

There's a third OEM harness for my Mach 460 system and if I'm reading the wiring diagrams correctly that third OEM harness is a speed sensor input that controls the OEM head units volume (there's a setting for it). Apparently, the aftermarket units don't have that option.

[@WayUpstate]

So what do you do with the third plug on the factory harness that the "power antenna" would have plugged into?

[@machnone7967]

Sykotik 2V dont use it idk what cars need it but i doubt its the new edge mustangs

[@scar4578]

What happens if u don't use a step down?

[@ryzayria1]

What about the brown wires. What color wire did you connect them to

[@machnone7967]

Just color match with all the other colors

[@leonelmartinez2486]

Can this work for the mach 1000? So far ive only found mach 460s tutorials

[@target1172]

How’d u end up routing the usb? I’m tryna make it clean

[@dr-bl8ph]

routed it under center console and drilled a hole and put a grommet

[@chrisroberts953]

And is yours convertible

[@mustangguru7810]

What year mustang is this?

[@dr-bl8ph]

2003

[@jacobpowers6553]

I dont have a stepdown what can i do

[@machnone7967]

Don’t need it

[@machnone7967]

Selling My car for $10,000 message me or whatever you do on here for Craigslist posting including all mods and information on car

[@vela.blendz9893]

All I hear is blah blah blah I don’t speak wires this shit don’t make sense

[@kawalt]

1999 is different.