How to install an aftermarket Steering Wheel

[@01bullittgt84]

I don't think I've ever enjoyed watching videos as much as yours.. keep making these videos I love em

[@Intaketv]

BULLITT CHRIS I don't think I have ever enjoyed reading a comment as much as this one. Cheers Brother!

[@walnut5603]

Looks great. I owned one about 20 years ago and I still remember it is one of my favourite cars. The driving position was superb.

[@Overlord6196]

I never got a quick release to work well in this car, at least for me. I'm short at 5'7. Ended up with an NRG short hub and a 1/2 inch spacer for near perfect fitment.

[@l8er]

Your Z videos are entertaining and love watching them! Keep it up. Greetings from California!

[@Intaketv]

l8er just as much as I love reading your comments brother! Greetings from my house!

[@JB243bikes]

Loving these videos. Might be picking up a Z32 here soon, always wanted one and this makes me want one even more!

[@scottmaxwell1927]

Subscribed after the first swig of beer mate!

[@tomahawkmotorsports6628]

Shes looking a lot better. 👍🏻

[@Intaketv]

Tomahawk389 You should see it now. ;)

[@GIBBZYJ1]

Looks much better for it! Also lower it 22.8mm. Would look better for that too *sips beer*

[@tallnrough68]

Short hub with slim quick release, or hub and quick release with a flat steering wheel

[@FREE_WILL_DEFENDER]

Love all your videos informative, funny, love the mario sfx in this one nice touch

[@Intaketv]

FREE WILL DEFENDER cheers Brother! We will just keep doing what we are doing!

[@bricenorth3562]

You can get a works short bell hub that might work with hicas also comes with resistors to cancel air bag light if you had one

[@RobbyGalvez]

Nice videos bro definitely giving me a heads up with what I want to do with my z.

[@The300ZXGuru]

13:34 red stitching for faster gear shifting. i laughed so hard i damn near pissed myself,

[@jessethreemoons]

"going straight to bed tonight" had me rolling until the end of the video man great stuff

[@randomrebuilds]

This is hilarious, yet informative. Don't they make a lower profile hub for the Z32?

[@brentmoreno2947]

I’ve been waiting patiently for this! Thanks!!

[@Intaketv]

Brent Moreno Cheers brother. More episodes will follow, with a smaller gap in between.

[@joshXnovak1]

Somewhat less patiently on my part.

[@Simplicityy]

I used a NRG shorthub with the quickrelease for my z32, and there's also supposed to be an o-ring on the old shift boot that goes on the new one.

[@Intaketv]

Simplicity In hindsight, that combination would have been fine. But the availability of the NRG hub with Hicas was non existant at the time I ordered the parts. As for the O-ring. Put it down to weight saving.

[@michaelalphonsejr]

You are awesome man, watching all your vids.

[@paulfalb]

To make the e brake boot fit tighter fold it over on it's self in the grove so it's doubled over with the button on the inside. It's tight and hides the button. This is what I did to fix mine.

[@Hey_Im_Cable]

Hey mate great video, currently doing mine aswell and am wondering what is that black ring piece that is still in your hub that you say to connect for the horn? I’ve got a 1991 non hicas and I took the steering wheel (looks same as yours) and it doesn’t seem to have that

[@NickBerte402]

Gotta get a NRG short hub instead. It’s about half the length of the boss kit and looks a little nicer as well.

[@r3ktfahdle120]

Nrg doesn’t offer a hicas model hub

[@tlkfromdaby]

@intake! Do you still have the quick release?? I want it lol

[@Intaketv]

tlkfromdabay sorry Brother. Long gone

[@washasquasha3756]

Hey mate, would you please give us a link to the Nardi wheel you used as well as the gear boot you used? would be great as i am trying to source the same things , Whch can be hard in the NT :)

[@Thewolverine691]

You asked for a comment well here ya go. if you got a flatter steering wheel it would have been a lot more closer to the dash as it wouldn't have sit so far out. just saying. great vids mate your a good ol laugh and a lot of hints n tips picked up along the way when restoring my Z tt2+2.

[@Intaketv]

Leigh Stevens nah, yeah. But, I like this wheel. Gotta make a choice, and the wheel won over the quick release.

[@Thewolverine691]

Intake! Hey buddy what did ya do with the white interior did u sell it off or ditch it. Got a mate whos keen to go white inside.

[@Intaketv]

Leigh Stevens it is sitting in my shed at home. Just need to redo the centre console lid as I used it. So if he wants it, it is all his!

[@Thewolverine691]

yeah thats sweet what ya want for it all he asked ?

[@Intaketv]

Leigh Stevens when we swap it in to his car. He is provided the drinks.

[@JamesWilson-du4xt]

I know it’s a year later. But for the quick release, they have slimmer quick Releases don’t they?

[@Intaketv]

Not for the use of Hicas (I think), but that will be going soon!

[@jordy0208]

Nardi looks lovely in the interior, shame about the quick release. Might be worth checking out NRG slim quick release or similar from another company? Might work a bit better for you

[@peteranthonyanakwe9040]

still selling sparco? if not which one did you get?

[@antoniomartinez1336]

What's the size of the boss kit

[@aserodriguez1425]

Get a short hub boss kit 😄👍

[@Mattpdx1]

Yep, just need to put the nut in.

[@Intaketv]

Matt Luker there is a sex joke in that phrase

[@tangles01]

Is it mandatory to install a Nardi in a 300ZX? Mine has one, and well every single one I have ever seen has one too. I recommend a cordless rattle gun for such jobs too.

[@Intaketv]

tangles01 Yeah mate. The law was passed last week. It is now mandatory for Z's to have a Nardi installed as replacement for any standed wheel. Many beers would have been consumed to pass that law.

[@tangles01]

PlanetStivva must have been a job creation scheme of some sort.

[@joshXnovak1]

My cruise control is still functional, so I’m keeping my stock wheel. Definitely not mandatory.

[@Intaketv]

The only cruise control my car had was 5th gear and a steady foot.

[@tangles01]

Cruise conwhat?

[@jaysixfive0922]

Link to steering wheel?

[@kristianilic1689]

What state are you in? Is replacing a stock wheel with an aftermarket wheel legal? I know there a shit ton of rules around replacing rules

[@Intaketv]

Kristian Ilic G'day Brother, Intake! is brewed in Victoria and we may or may not be able to run this wheel legally. But the standard one was doing us no favours.

[@prestonwilson9548]

HOW DO I GET THE HORN BUTTON IN?!?!??!

[@Intaketv]

Push it, push it good

[@Nismology33]

Ditch that sparco quick release it's a POS bro...it has so much wiggle and play when installed

[@Intaketv]

Great Idea. You will be pleased to know I fucked it right off about 14 months ago.

[@kochertv8795]

what would you ask for the quick release and shipping to the states brother?

[@Intaketv]

KocherTV Sorry Kocher! I have just sent the quick release off to another viewer!!!

[@kochertv8795]

ahh alright man, no worries! lovin these videos keep it up

[@evancampbell5980]

What size adapter did you use, i cant find anything on it and nrg wants me to buy 200 dollars worth of shit but im broke

[@Intaketv]

Something like this? rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F113011362814

[@evancampbell5980]

Intake! Yessir thank you and happy beer spilling 😂

[@oldmanmyass4286]

A little bit crazy in a funny way

[@FREE_WILL_DEFENDER]

2 beer job lol nice

[@MrJimbojuicebox]

What size wheel did you go for?

[@Intaketv]

MrJimbojuicebox Gday brother. The wheel is a 330mm I think. Its just slightly smaller than the stock steering wheel

[@plezurhounds]

Enjoyed:-)

[@nitrousninja1]

Coming along nicely. Considering you havent done any major work but you managed to make the car look a hell of a lot better. Props. Whens the ls1 swap?

[@Intaketv]

nitrousninja1 need to learn how to crawl before I can run a marathon brother! That is to say, I needed to remove all the developing penicillin before I was willing to sit in it.

[@gav240z]

Entertaining, shame you didn't keep the 260z though!

[@Intaketv]

gav240z I didn't drive it brother! I needed a car that I could drive everyday if I wanted. Powersteering, AC, Super Hicas, all the mod cons. Well, maybe not the Super Hicas.

[@gav240z]

PlanetStivva let me know how you go working on that engine bay 😁 but I understand the mod cons like fuel injection etc..

[@Intaketv]

I have three children, each with hands smaller than the next, got it covered!

[@gav240z]

PlanetStivva lol nice 1.

[@joshXnovak1]

Here’s a start-up and rev for you. Walk around per your request is currently uploading. kzbin.info/www/bejne/nJu2npWMhLGNqas

[@Intaketv]

joshXnovak1 awesome brother! Will be sure to jump on both videos as soon as I get on the PC at home!

[@joshXnovak1]

PlanetStivva as my family would say, “Excelente!”

[@Intaketv]

Jumped on brother and keen to see more in the future!

[@maverick2242]

2 beer job, Fkn a bro. Tip on correct measurement for anyone adjusting seat to steering wheel , when seated stretch both arms out to the wheel position hands last the wheel at 9 and 3 you wrist joint to line up with the side of the wheel at 9 n 3 this is from top race car drivers school, I actually got it from Nigel Mansell back in the 90s. Your control while driving will be great enhanced if you don’t know this try it, esp important for “female drivers”, they are the worst for being to far away from the wheel. Call me sexist but I never been riven wrong on that re women, about the only thing I get right with them haha. Btw I needed 2 beers watching this, cheers mate.

[@mattmace10]

Where's the next episode?

[@Intaketv]

Captical would you be happy if I said it will be out within a week?

[@mattmace10]

PlanetStivva Fuck yeah, i just binged all the episodes and also consumed 8 beers. Love the content man 👌

[@its_joel215]

Bucket seats

[@shieldautoparts6487]

99.9% sure that's a fake Nardi... Nardi steering wheels definitely don't have a problem with the horn button fitting through the center and the shiny look to the leather (and painted look on the spokes) makes it look fake (Nardi steering wheels also have a serial number on the back of them since 2012).

[@SylvieCanuck]

*goes to tighten nut on kit* Me: *waits for horn to honk* Car: *HONK* Him: FUCK Died, loving your videos. Recently acquired a 300zx and am just watching through your 300zx videos for ideas.

[@Intaketv]

There are certain ideas of what not to do... Like scaring yourself with a horn honk.

[@WeSpeakNL]

Nicee!!!

[@Th3Sc0rp10wns]

tracey grimshaw exclusive. bloke who sinks beers installed a steering wheel with no crash pad. what a hoon

[@Intaketv]

Th3Sc0rp10wns a menace to my own Garage!

[@ericsolis6673]

Nrg short hub