How to Install an Amp & Subwoofer EASY! (2024)

[@ColtonRichter]

Updated 2021: kzbin.info/www/bejne/gqaalZd8hNh8a80 Hello 4 years later, and this video is still firing off. If you proceed to watch, I made many mistake. I would highly suggest watching the updated in the link above. With that being said, take safety precautions and your time. Keep it real

[@jordanj4575]

6 years later and still the most helpful/informative amp and sub install vid!! Thank you so much!

[@ColtonRichter]

Glad it's still helpful!

[@swooshpanda2621]

Having a trunk battery is a godsend 🙌🏻

[@nicolasfernandez7402]

My 03 bmw has this and I'm so lucky that it will be easy af

[@xx1988nativepridexx]

My little HHR battery is in the back lol

[@hernanperez5267]

Nicolas Fernandez same w my 96 bmw e36 😂😂

[@ragequeenog7353]

what if u buy a spare would it be easyer

[@nicolasfernandez7402]

@@ragequeenog7353 a spare battery?

[@nicholasmiller8905]

Finally a guy who can actually explain how the amp turn on I couldn’t figure it out for anything I didn’t connect the remote wire because I thought it was for bass knob and I don’t have one after searching forever finally found some one to help me out appreciate it 💪

[@Az-elite]

What's the remote wire for ?

[@agr_xxthetruesweatxx178]

Do you even need ten remote wire for it to work and what is it anyway?

[@rivash_prithipal]

​@@Az-eliteIt's to trigger the amp to turn on and off with the radio so that the amp does not run constantly and drain the battery.

[@ltbomb7194]

I first wanted to say...THANK YOU, THANK YOU. SO VERY MUCH. Out of all the instructional videos on KZbin, you made the best one. I watched tons over and over and i never got the.concert and execution of the job as easy as your video. Like i said, i watched them over and over 5+ times. With yours, 2xs. Again, thank you isnt even close to how grateful i am for ur help

[@ColtonRichter]

Glad it helped!

[@tylermarshall1078]

seriously though its incredible how much other ppl leave out or use weird terminology he showed everything and left nothing to interpratation he said in clear words its almost infuriating how irritating other vids are

[@LIVFORVVR]

This is the most informative video I found yet finally a video that actually answers the dumb questions that I have great video thank you

[@naeeskiixx]

We’re you able to successfully hook up your system

[@ryanh4698]

Thanks man. Very detailed. Now i actually know how to wire up a sub Big thumbs up!

[@bigblackjack3637]

No capp I don’t know anything about this so I guess I’ll spend the extra money to get professionals to do it

[@drummonkeystuffuk1875]

Lol bring it to me...itll be done in a few hours and setup perfectly :)

[@luisv9029]

@@drummonkeystuffuk1875 where u live son

[@bryanbill3692]

The work load is worth what professionals charge. Just make sure you have all the equipment you want installed ahead of time to avoid overpriced in-store materials. For ex I get a circuit breaker instead of a fuse to avoid having to install a new fuse Everytime .

[@caveman69_]

that'll be a couple hundred dollars please!

[@Xippone2093]

@@drummonkeystuffuk1875how do you just know how to do it? It’s so confusing I already watched like 4 videos, I have a sub amp and a wire kit and I have a stereo in my car already

[@rockboss65]

The roll of blue wire is your remote wire when you turn on your deck it will automatically turn on your amp it hooks up to your blue with a white stripe wire off your decks wire source

[@flightinseptember4438]

Thank you

[@jbmjbm323]

That is what I was thinking. Why did he goto the cigarette socket wire when he could have used that aftermarket radios remote wire out. Most all factory radios dont have rca outs. So he must have an aftermarket radio.

[@surfstarcc1]

Good video!! I'm installing my first amp and subwoofer ever in my truck. I feel more confident now. Haha

[@ColtonRichter]

Get er' done!

[@davidschreckengost7959]

Not bad for a very basic install!!! FYI going to the lighter good idea, but won't work on newer cars. If you're not going to the radio with remote wire the best thing is the fuse box ( the radio fuse ) they even make cheap fuse add ons that work really good. Personally i always run the remote wire with power and rca's by themselves. And for those that are using this to do their own! Ether make a amp rack, mount the amp to one none movable location, or if you really need to mount to the box. A clean install is a must, almost as important as quality wiring properly rated for the system

[@jbmjbm323]

I run my remote wire from the cigarette lighter socket. I have a stock radio and I jumped into the + wire going to the socket. I tried doing it from the fuse box but for some reason my 2018 Honda is a cónstant on from the fuse so I did it from the sócket like how this guy did it here but I did mine cleaner with no copper wires showing.

[@davidschreckengost7959]

@jbmjbm323 modern cars have constant power to radio and usually the lighter! The best choice in those circumstances is the ignition fuse! Will never have power when vehicle key is off! That way you can still use the fuse insert! With it being a factory stereo you have another option. Use the line output converter with signal sense.

[@jbmjbm323]

@@davidschreckengost7959 I have a Kicker Amp and it has a signal sense. But the problem is when I play it toward the 3/4 volume, the amp goes to protect mode so I needed an rem to keep the amp from going to protect and make it stay on always.

[@davidschreckengost7959]

@jbmjbm323 yeah Definitely use ignition. It will work

[@davidschreckengost7959]

@jbmjbm323 you know what. That might have something else going on. I would oscope, and multimeter the system! Verify, good solid cooper wiring, and the ohms. Just a thought. I don't know your set up. But could help if you want bud

[@KhaiMahase]

This video seems really easy. Just to be clear, the factory speakers or if you have aftermarket speakers don't have to be wired into the amp? Correct. Just an rca cable that goes from the infotainment screen or the radio to the amp. From the amp to the sub you connect the required wire. After that's complete? Of course I know I will have to run the positive wire and the negative, after that the remote wire, Then its complete it?

[@WaveDashZoom]

I fuckin lost bruh I’m finna pay someone to install my shi

[@LeightonRowe-q2y]

Great job man 👍 probably the easiest and simplest step by step how to wire up my amp and sub in my car...... thanks man good job.

[@drummonkeystuffuk1875]

Yup, SW - sub woofer, f = front..and R would be ear. Some units can be a little more complicated if runing 4 way active though lol

[@lepanimatea3264]

The number of times you used the word "basically" is awesome

[@ColtonRichter]

heck yeah

[@SOLDOZER]

Take a shot of whiskey each time he says "basically".

[@ColtonRichter]

still a thing to this day

[@jacobmartinez4109]

🍷🥂🤯🥴🥴🍺🍷🤯😬

[@ctsvblk]

You’re gonna be drunker than a skunk coming home from Wyoming...

[@kirksingletary3788]

I read this at the beginning of the video... why did you do this to me

[@sv8313]

Smoke a bowl everytime he says basically.

[@isaiasgomez2594]

There is a blue wire in the radio that says antenna turn on. That's used for the amplifier turn on. But what you did works too.

[@bg31282]

No you are wrong antenna turn on works only when you listen to the radio. But there should be a remote turn on wire also. Most are blue/white

[@Ken.chocken31]

@@bg31282 in the early days the blue wire was power antenna where you're antenna would use an amplifier to boost or be able to get certain powerfull radio signal and in today's car audio the antenna is already powered ....that's why it's remote now

[@bg31282]

@@Ken.chocken31 I understand back in the day sir. I started in car audio in the mid 90's. If there are 2 blue wires (one is normally blue with a white stripe) the one marked antenna is for a powered antenna and will only kick on when the radio is on. The remote turn on will work for all

[@Ken.chocken31]

@@bg31282 actually the remote will give power when the radio is turned on else it won't be a remote but a backup 12v

[@Ken.chocken31]

@@bg31282 yep it will work for all your devices that needs power only when the car is in the acc and on position.

[@bg31282]

Why did you not hook your remote wire to your remote turn on in the back of the radio? You did alot of extra work for no reason

[@_jahson4272]

What do you mean back of the radio?

[@sethrice8123]

Aftermarket radios usually come with a blue/white wire that is your amp turn on wire (remote wire) should have just ran that with rca cable.

[@ghost-carnage8964]

All.stereos have a remote wire to tell it to turn on. He could have easily cut the wire strip it and use a crimp connection throw the new remote wire in with the existing...

[@Speedster189]

He's noob that's why he shouldn't even be making these tutorial videos because he only shows 15% of the process

[@adanssvlogss]

Behind the stereo there is a remote turn on wire. If there is no remote turn on wire just connect it to the red/ignition wire

[@metheperson4064]

I love the hidden bits of humor in his voice

[@Charmander_kid]

your Aussie mate here again bro, thank you once again for the help with my Mazda 3 it’s been some time since I’ve done mods to a car so your videos are really damn helpful 🤟🏻 Much love bro

[@ice2chillzz257]

I remember I had the 12” sub MTX and the amp. Someone stole it lol, 23 yrs ago. It was a great setup yes!

[@ColtonRichter]

Stolen 😢

[@ice2chillzz257]

@@ColtonRichter I know right, I was heart broken

[@davidgagnier5658]

Thanks man Perfect explications and video juste did mine thanks too you

[@ColtonRichter]

Your welcome!

[@clubdub-v6l]

Just tap the 2 wires on the radio wiring harness. Lot easier than taking all the lighter panels and screws out. Just letting you know there’s an easier way.

[@nelsonestrada1544]

Very informative video i really appreciate you putting in the time and explaining this thank you !

[@ColtonRichter]

Glad it helped!

[@zeuschavarria1263]

We have the same name I went back like 5 time and put subtitles on to see if I was tripping 😂😂 dope vid very useful

[@chriscarterJW999]

I have 1999 Ford explorer that has a huge system in it. It has 19,230+ watts running the system.

[@ColtonRichter]

That's crazy

[@Az-elite]

Whats the remote wire for ? And does this set up work on a factory stereo?

[@ColtonRichter]

Its the on and off signal

[@jessiec4128]

After market radios have a remote wire. But yes you can install it on a wire that becomes hot once you turn on the car. Not to a constant hot, Just listening to your radio with your woofers hitting will drain your battery pretty fast. And if your battery is at the replacement time, you will need a new battery. Just fyi for those who don't know. Also Colton, I have the exact same woofers to put in my car. They do work pretty good!!

[@ColtonRichter]

Thanks for the input! It's a banging sub 🔥

[@KevinWilliams-Theone]

Dude! Ty! Great video! Thanks for talking in English! Really understandable...you rock! Keep the vids coming!

[@MatTheLesser]

I’m gonna give it a shot I think I can do it, he explains it well, smoke a blunt 🗣🔥💨and get it!

[@ColtonRichter]

All the focus

[@1u15_angel_8]

Do I connect the power cable first or the ground

[@ColtonRichter]

Don't connect power until everything is wired

[@tywright5353]

This was a good damn video. 🔥

[@SharkNewGeneration]

this guide is better then the rest is garbage 👍 nice i like it👍

[@NicholasGoodrem]

I miss my old thunder 5500 in sledgehammer box dam good cheap woofer.

[@ColtonRichter]

Bet it boomed

[@ismet_sxv]

You were the best yet with showing how it works. Thanks

[@ColtonRichter]

Glad it helped

[@oliverpersson5624]

You deserve so many more subs man. Love the content!

[@ColtonRichter]

Thank you!

[@gabriel99thomas]

Wholesome unintended pun

[@zaytyga]

Just out of curiosity... The connector to the radio didnt have a remote wire?

[@francomonno3256]

Thanks bro I got a STI but sure it's very similar to this ♥️

[@ganeshnarayan5505]

hey dude thanks for the video. great work

[@Bogdan.p96]

wow that mazda is so cool, I like the pedals very much among other things

[@ColtonRichter]

Thank you!

[@aj1991larson]

They add like 7-9 horsepower when you install those too! Highly recommend upgrading your pedals!

[@cathair9295]

Was that burial you were playing at the beginning?

[@mikeoc3585]

Does this work on any car, if not which types of cars would this not work on?

[@rain7096]

👍

[@CarlosOrtiz-ht6rn]

@4:43, that's what she said 😂. Great video thanks for helping me install my amp and speakers as soon as they get here from Amazon.

[@ColtonRichter]

AYyyyyyy you got me haha

[@lukesimpson5534]

You look like a young David goggins

[@cluettdasnager73]

bro you definitely made the best video

[@ColtonRichter]

Thank you!

[@XxMalabooo]

Lets say i had no choice to run signal wires and power wires together. Anyway I can reduce interference by wrapping the power cable in something?

[@420flying9]

Thanks bro best tutorial out there for sub and amp setup!

[@hotwheelsentertainment5079]

Where did you hook your ground wire on the dart?

[@hgf_chriss2378]

Best instructions yet

[@YT-glockstreamer]

Can u connect the remote to the radio amp wire

[@jaydenshaw01]

Best video that describes how to do did.

[@livelife909ie]

Can you cut a 12inch hole in your car door and put em in there or do you need a box and amp?

[@ColtonRichter]

Man i'm pretty sure people cut out their doors and stick this in them 😂

[@jbmjbm323]

Just make sure your windows can still roll up and down freely.

[@greg4442]

I conect the remote to the red cable (acc) of head unit (radio) will it work ?

[@connorabernathy4368]

Thanks for the great vid! One question though: how do you remove the stereo deck? I saw you going behind there while it was removed to connect the subs, but you never showed how to remove it

[@ColtonRichter]

Pull of the trim that goes along the dash (above the deck), there will be a couple screws holding in the stereo then you pull it out and wala

[@connorabernathy4368]

Awesome! Thank you so much, you're the best!

[@srwllamray2359]

good lookin out! great vid..

[@hoesayrivera1723]

Is it better to do RCA cables or to run a LINE OUTPUT CONVERTER will RCA give my amp and sub more power i currently run a LOC and not RCA’s

[@sethrice8123]

You only need an LOC when you have a factory radio because aftermarket radios come with rca outputs. Hope this helps.

[@hoesayrivera1723]

Seth Rice sure did thanks man! So it’s the aftermarket radio that will help improve the sound to be more louder/better?

[@sethrice8123]

HOESAY RIVERA yes sir, your aftermarket radio depending on which one you get actually has a higher wattage out put than factory radios so your factory speakers would be getting more power with a new radio!

[@cleito001]

13:05 if you’re watching this video wiring your subs at this point do not just skip over it like he did. Watch a video and learn how to set your gain with a digital multimeter or if you don’t have one learn how to tell where to set gain or you will clip and wreck your subs real quick. Pretty solid video but don’t tell people wiring sub and amp is easy if you’re just gonna skip the complicated but important stuff!

[@ThatGuy-sc5rx]

If I pay to go ahead and get this stuff installed if I already have all the materials and equipment, how much is a reasonable price ?

[@302mustanggt8]

I'm just getting into subs and bought a Memphis prx500.1 amp, how do I set gain with no gain control

[@jbmjbm323]

​@@ThatGuy-sc5rxa reasonabke price means you will always have to go back and get it fixed over and over until they say f it! Finding someone to do a good job will mean it works great the first time and will last.

[@trip5238]

My dad never taught me these things. I’ll take notes

[@abrahamgarciasuarez5228]

The most difficult thing for me is installing a car stereo because of the many wires it comes with its so confusing I once burned a stereo so I know the amp install is easy and setting up the wires but I do feel I will struggle with remote wire and all the other ones

[@ColtonRichter]

Take your time, learn the car. Makes things easier when you know which does what

[@abrahamgarciasuarez5228]

@@ColtonRichter your right the best eay to learn is to take some time I just bought me a 1500 watts rms subwoofer and amp good enough to power but I would like for you to advice me if its necessary to get an extra battery for it or is it fine on car battery?

[@robertmorris2695]

My truck got an extra battery tray, so imma just have my own sub battery 😝

[@ColtonRichter]

W

[@lucifermorningstar4503]

Just a quick question when contacting to the battery it is the positive terminal you connect to ? As I couldn't see lol

[@ColtonRichter]

Yes

[@mr.salammander139]

Thank God I drive an old truck and only have to pull 3 screws to run my wiring under my carpet

[@Punchmememe]

You are a hero ! Thanks mate !

[@jaynielsen648]

Thanks buddy 👍👍

[@masonragusa4239]

Love the vids

[@matthewjohnson-trout6121]

Great video but after wiring mine the caps you unscrew on the fuse are supposed to be placed on the wire before putting the wire in the fuse so it is sealed.

[@ColtonRichter]

You are right, have done that since

[@fernandovvasquez8767]

If I’m running one sub only. Do I only hook up one rca Jack to the amp

[@jbmjbm323]

Mono and 2 channel amps have only 1 iL/R nput. A 4 channel amp have 2 L/R inputs. And a 5 channel has 3 L/R inputs.

[@rw2890]

have you put your amp cable parallel to the stock speakers in your doors?

[@adanssvlogss]

Aye if yall got a 4ch amp and a 2 channel stereo use rca splitters or distribution blocks

[@kristicarhomeaudiosystem47]

What Gauge of Power Wires do you use?

[@ColtonRichter]

I believe I used 2 gauge?

[@kristicarhomeaudiosystem47]

@@ColtonRichter 2 gauge it's very thick. I think it's 8 gauge. 😉

[@ColtonRichter]

Right, I was thinking of another time 😂

[@bradroff8575]

Where did you get your red bolts with the kanji on them? My 323 has some purple ones on them and I want more

[@ColtonRichter]

You can find them on eBay

[@rw2890]

or have you put your stock speakers together with the new amp?

[@drummonkeystuffuk1875]

As long as you run the rca leads on the opposite side of your to your power you'll be good :)

[@tyronlewis9056]

Show me how to hook up the ground the the seat bolt

[@Kyle_da_athlete]

I'm new to this but I've seen some videos where they connect the speaker wires to the amp itself . Is this required?

[@ColtonRichter]

This is if you want to have amp power running to your speakers. This is up to you!

[@famousdev9707]

Depends on the amplifier. How many channels and what you want to do. Subwoofer amplifiers are typically monoblocks so only have one channel. This means no right and left channels for doors and no fade front to back. Just one channel. Also doors work on different frequencies. You'd need a crossover but it's not realistic. A. Five six or four channel amp can be used for subs and doors. (1 channel sub, 4 channels doors) (2 bridged channels sub. 2 front channels doors.) (Bridged 2 chanels sub, 4 channels doors.)

[@awspopp1741]

@@famousdev9707 what do you mean by channels???

[@jbmjbm323]

They connect to the speakers positive and negative wire to an amp or rca converter because most all factory radios don't have rca ouputs.

[@jbmjbm323]

​@@awspopp1741channels - a left and a right channel. 1 rca plug. So 4 channels mean a front left and right / rear left and a right.

[@Killiri]

I was expecting another shit video. All the prior ones the guys didnt know anything they were doing. You actually have a familiarity with installing. The most common beginner mistake is people who dont hide their wires or run through their door gap to the battery. This is a good video for beginners. Next step is a door amp and adding a cap 😉

[@sethrice8123]

This guy didn’t know much either, anyone can hook up a red wire to positive on battery and put a wire on a seat bolt for ground, doesn’t mean it’s good or the right way at all. The only decent thing about the video was that he hid wires. He says that the video is for educational purposes but the only thing I learned is that I should find someone who actually knows how to do things the right way.

[@ragequeenog7353]

is it ok if the red cable is super long . coz I did this once before but my plugs broke . so i stupidly took it all out . I bought a new kit and I have to red cables now . would it work ok having 2 of them. and dos the fuse need to be next to the battery or can it be beside the passenger seat

[@jbmjbm323]

The fuse holder next to the battery is for your protection. If you had the fuse next to the passenger seat, the long red wire running all the way to the seat might melt and come apart and if those copper wires touchs any ground, it wiill çause sparks and even maybe fíre. So that is why the fuse iholder is next to the battery so if there is any wire problems, the fuse will blow and no power would run through the red wire. Also having it super long will make the voltage drop and the amperage it can handle will drop as well.

[@jona_le_mus]

Quick question... All the component are connected, but from the input of the amp, where does the output go? I can't go into the sub...

[@jbmjbm323]

The output would go to another sub amp if you are running more than 1

[@Ttngu106]

how did you get it secured in your trunk so that while you're driving it doesn't move?

[@t-manonthebeat9189]

bolt it down most likely

[@ColtonRichter]

You can buy L brackets, do some drilling and mount it wherever you please!

[@150cc_julio]

I’m buying my wiring kit tm

[@ColtonRichter]

Good luck!

[@hcisnbsicnenx542]

Why does my fuse in my power cord always blow right when I hook it up? I have gone through like 10 fuses now and every time I hook it up, it throws sparks, and it blows another. I need help.

[@jbmjbm323]

Your wíring setup is F'ed up. Make sure none of your wires are not touching each other or touching anythng metal to the car. Especially the red power wire is not touching any ground wire or even touching any part of the amp or car part.

[@louisvuitton56]

Warring : Always connect the power cable to the battery at the end..

[@ColtonRichter]

This is true, learned this one since the new install!

[@lilyaman213]

If i have a stock head unit on my Subaru, will this wiring kit work? Along with the rca

[@kylermorette1105]

You’d have to take your radio out and check, most people with stock radios buy little boxes that allow them to tap into the back speakers

[@markusray319]

lc2i

[@sethrice8123]

Line out converter

[@cyrena5926]

idk if you still follow up with your videos but i connected my remote wire to the antenna output should i rewire it to the ignition switch? it never turned on...

[@ColtonRichter]

I mean you could try, or if you have an aftermarket radio it can go to that radio's signal wire.

[@cyrena5926]

@@ColtonRichter i hooked everything up today and got some power with a jump wire but with the main cable running through the car won’t give it power any tips on what i did wrong?

[@ColtonRichter]

It must be where you hooked your remote wire, because if that doesn't get a power source then your power wire won't give your amp any juice. If you hooked up power directly means that power that you're using doesn't have a switch and juices it straight from your jump. Test around for more ignition sources

[@calexis561]

Im not sure how to connect my remote wire. And what if i have a amp kit that has a speaker wire do i have to use that wire as well?

[@ColtonRichter]

Speaker wire is for the sub, connect your remote to a signal wire behind your radio for ease.

[@Linkflame99]

Dude I set everything up like you did but I’m getting hella heat from the back of my head unit but the sub works great though idk what I did wrong

[@ColtonRichter]

Head unit produces heat, you'll notice it before or after a sub install.

[@Linkflame99]

Colton Richter idk if it is supposed to be like burning hot tho

[@ColtonRichter]

That seems a little odd, yes

[@jbmjbm323]

​@@Linkflame99it is in your name. Link "FLAME" 99. Hope your radio don't catch on FIRE if it is still burning hot.

[@declanfallah8112]

Hey Colton I’ve got a 2009 bk 3 rn with stock head unit and I’m wondering why mine doesn’t have those colour things to plug the Ac cords into the back I’m so confused ?

[@ColtonRichter]

I forget what it's called, but you need to wire in some of those. Multiple tutorials on KZbin to help you out with stock radio amp wiring!

[@jacbybentril7114]

You need a like output converter if you have a stock headunit. Plug the rca’s from the amp to the line output converter then take the 2 sets of speaker wires from the line output converter and tap them into the your rear speakers.

[@sethrice8123]

What jacbybentril said but specifically left rear speaker for loc

[@sydneypurgason7311]

i wish you showed us how you connected all the wires

[@bilalahmed2386]

Anybody know how to get a remote signal in the boot of an e61? UK spec. Standard head unit.

[@DemarcusQ]

If only it was a bmw.. the batteries in the back 😆🙏🏼

[@Seth1SS]

Same with volvo s60

[@CobraPhobic]

My cable tunnels on my vw polo 9n are made so stupid they have a strong bolt connection which i didnt know and obviously ripped apart a plastic piece of the tunnel at the rear seats....

[@ryanlaforte9915]

whos here in 2024?

[@ColtonRichter]

Me

[@Nlqc41832]

Your mom

[@m.pence1575]

good video

[@Drakmaster1337]

So pretty much one wire goes to the battery, one connects to the back of the car stereo, but I'm confused about the blue wire, the remote wire

[@ColtonRichter]

Connects to an ignition wire, where power is received when the car's power is turned on.

[@Drakmaster1337]

@@ColtonRichter where's the ignition wire?

[@ColtonRichter]

No clue, that's why having an aftermarket radio would be useful to tap into that ignition wire. Depends on your car as well.

[@ghost-carnage8964]

Shouldn't remote wire be ran with the power wire and away from the rca

[@willg125]

Yes it should, but interference from a remote wire is much less than interference from the main power wire, so if you must pick between the two, choose remote.

[@ghost-carnage8964]

@@willg125 yea I mean for me personally, I'm a ocd type of guy and I like all my shit to be perfect.. kinda gets to me I set my gains with rockford clean but it's ight. If I do blow a sub well lesson learned I'll grab a dd1 next time.

[@willg125]

@@ghost-carnage8964 also a perfectionist. Working on electrical always takes me so much longer than it should because if it.

[@ghost-carnage8964]

@@willg125 bro on godddddd

[@aleki_2.4t61]

so basically the blue wire is for accessory?

[@ColtonRichter]

You can say that, yes

[@aleki_2.4t61]

@@ColtonRichter ok thank you

[@busch2174]

R u Canadian Bud?

[@MixedMedia33]

thank you!! Luckly my battery is located in my trunk i have a 2009 hhr.

[@ColtonRichter]

W

[@Fishing-nf5ev]

What Color blue wire did you splice into on the cigarette plug

[@ColtonRichter]

Power (black with white line)

[@dubmaster01]

My favorite part is how he's wiring a hot battery lead through the chassis.

[@ColtonRichter]

hell ye