How to Install an Android Head Unit in 2012-2016 Honda CRV

[@DrAngel1968]

How did you get the lane keep camera to work on the unit?

[@FaysalJS]

Hey, how do you get the Audio and the backup camera connected?

[@flinthusky3319]

My only question is how do you turn your hazards on after replacing it?

[@mayowaolopade4978]

Hey man, great video...but how do I connect the USB supplied with the abroid unit to the USB units in the armrest console. This is frustrating me. Also, my canbus had only 5 connectors but my OEM radio had 7, so I have like 2 connectors not connected, What do I do?

[@prabhdiyvideos]

Hello, there are 2 types of wiring harness. Check it in the link below. Just fish the USBs to the glovebox. a.aliexpress.com/_mLF28Bg

[@xXFreyrXx]

How do you connect the original rear back camera to work with the new screen?

[@prabhdiyvideos]

When you order the unit, ask the seller to send the wiring harness that that supports the back up camera. It will be plug and play

[@EbaleyTheRogue]

@@prabhdiyvideos I know some manufacturers provide a harness that allows the original backup camera to work with both the original upper screen and with the new screen simultaneously. Does your camera work with both screens the way you have installed it? Great video, by the way! Subscribed.

[@prabhdiyvideos]

Only on one screen.

[@EbaleyTheRogue]

@@prabhdiyvideos thank you for your quick reply. While the rear camera being on both screens would have been fun, I see that it would not be needed.

[@mayowaolopade4978]

Hey man, great video...but how do I connect the USB supplied with the abroid unit to the USB units in the armrest console. This is frustrating me. Also, my canbus had only 5 connectors but my OEM radio had 7, so I have like 2 connectors not connected, What do I do?

[@ovhfryerr6934]

My steering wheel buttons no longer work to control volume or skip song, also my factory screen above now does not turn off when I turn the car off (kills the battery over night) any idea how to fix? I tried disconnecting the battery already

[@prabhdiyvideos]

Try changing the canbox settings under factory settings for the steering wheel controls. Regarding the above screen try, trying contacting the seller.

[@IustinNan-d8n]

I was trying to setup,didn't worked ,and when i put the old one back didn't worked anymore...+the automatic locking door does not work anymore...

[@prabhdiyvideos]

Check you have the correct harnness, there are 2 type of harnness for this car. And you will need canbus Decoder as well.

[@IustinNan-d8n]

@prabhdiyvideos Yes I understand but why even the old one when I putted back does not work anymore

[@prabhdiyvideos]

Not sure, might be some connector or wire is broken

[@theyjustwantyourmoney4539]

No! I'm not going to dismantle all that