That's a super awesome video. Everything is explained in details. Great job! Thanks mate! 😊🤗
@NORIaquaCh2 жыл бұрын
Most welcome Mr. Jacky ☝️
@sallykat59262 жыл бұрын
Fantastic instructional video!! Well done 👍. Keep up the great work!!
@NORIaquaCh2 жыл бұрын
Thank you ❤️
@janhenryd2 жыл бұрын
amazing
@NORIaquaCh2 жыл бұрын
Thank you ⭐
@willparsons3211 ай бұрын
Looks like a decent lamp bracket however, when connecting the rod to the mounting the holding brackets one above the other on the side of the aquarium stand, some might find it impossible to drill a hole in the sides of the aquarium stand as many are now constructed of a metal composite material. Any pre-drilled holes within the stand are done so at the time of manufacturing. Secondly; by using set screws to fasten (and hold) the metal adjustable rods, you run the risk of stripping the threaded hole. I would recommend this that instead of using set screws, get yourself a pkg. of self tapping sheet metal screws a size bigger (about 1/2 the diameter of the poles) than the set screws and drill through both outter and inner metal tubing. This way you're guaranteed that the inner pole will never drop down inside the outter pole nor would stripping the threads over time will be a concern.
@NORIaquaCh11 ай бұрын
I actually agree to your comment on the grubscrew replacement for better stability. Grubscrews when overtorqued does a disservice to the overall structure not to mention threading, and it is much better to either replace them with bolts or metal screws. Excellent feedback which is great to see here. Thank you 😊
@SlimJimmy9162 жыл бұрын
do you think that it will fit a 36 inch long tank? to have the light in the center
@NORIaquaCh2 жыл бұрын
It will certainly fit a 36 inch (90cm) aquarium, just mount it slightly behind the aquarium so it's centred to your aquarium ☝️. Make sure you check out LitiAquaria to order 🙂 Link in the description 😌
@gamediet9722 Жыл бұрын
I have a 30 inch tank sitting on the center of a 37 inch cabinet. Will this work for that or no?
@NORIaquaCh Жыл бұрын
Mounting this from the rear should work fine 😊
@ivanparker803910 ай бұрын
What is that device attached to the cabinet?
@justin944319 ай бұрын
A device
@kamroncaldwell8680 Жыл бұрын
Im a year later but do would that be too much for my 29G long tank? 30 1/4 wide by 18 and 3/4s inches tall by 12 1/2 inches deep
@NORIaquaCh Жыл бұрын
If that's 30.5 inches then that means the tank is about 70cm. The 60cm variant suits tank sizes from 60 to 80cm, which means it is suitable for your tank. 🙂