How to Install and Program an Indoor Orbit 6 Station Timer

[@aneleaa]

EXCELLENT! THANK YOU

[@radiogirl85]

Thank you, very helpful.

[@Kuttysinaustralia]

Oh this’s so helpful! Thank you brother 👏🏽

[@chandracrowe6793]

What do you set the budget dial on if you don't want to budget

[@josejosegomez9]

Gracias thanks

[@Jennifer-nv8sl]

I have an Orbit 6 zone controller I just installed on a GFCI circuit but I only have 5 zones on my sprinkler system. When it gets to zone 6 it trips the GFCI breaker. Do I need to install a jumper wire between 5 and 6 so the GFCI gets the correct feedback and prevent the tripping? Thanks for your time

[@escompleteyardwork2984]

First thing, make sure there is no time on zone 6… Is there a wire connected to zone 6? If there is no time or wire then you may have a bad timer.

[@therugergeneral]

didnt show one single wire being hooked up. you spent a whole minute and change on "installation" but you spent more time than that on the battery backup system. not helpful at all

[@conniegunderson7440]

I have no screen. The didital read out it not coming on. Do you know what that might be!??

[@lunaluvboutique1318]

Why does it circle through all the zones but when it should be done it keeps going to zone 1 again. What am I doing wrong?

[@fnshighlyfavored4576]

Same issue here

[@kazanovanova3466]

Hello, why I can’t see program 5 and 6??

[@escompleteyardwork2984]

Are you referring to your timer or the video timer?

[@kazanovanova3466]

@@escompleteyardwork2984 to my timer. I can’t see 5 and 6 program on my device 🙂 thanks for the answer

[@natez787]

We programmed the sprinkler timer for Tuesday, Thursday, and Saturday for 5:00 AM for program A. When we turn the dial back to auto it flashes the next start time is Tuesday at 12:00 AM for program A. Do you know why? Thanks.

[@escompleteyardwork2984]

Did you press enter after you selected the 5am?

[@klausgersdorf8315]

I put 30 min and keeps running ?

[@escompleteyardwork2984]

What does it show on the timer after 30 min?

[@Kathy0118]

Hi, do you accept business cooperation? We will send you a smart sprinkler controller, you test it and make a video for us.

[@escompleteyardwork2984]

Ok sound good here’s my address ES landscape PO Box 15084 San Diego Ca. 92175