How to Install apply Back Windshield tint film Precut kit on a car suv truck window.

[@Mark583]

I could watch this all day ☺

[@williameverett2950]

This is not a "how to" video. This is just a demonstration of someone putting tint on a window as fast as he can. To make this a how to there need to be actual instructions. What was he doing with the tint on the outside of the car window for the first 5 minutes of the video? What are the various liquids he keeps spraying on the tint/window?

[@FugaConManolo]

He is shrinking the tint. KZbin that one the search and you will get videos with instructions.

[@kenj1862]

what fluid are you using to clean the window and then what are you spraying all over the Tint and windows during installation, thx

[@josegaeta815]

Where can I buy some of that llumar or suntek that I see on the shelves in the video

[@Kevin_Yagoonie]

I ordered from you guys. Do I have to heat shrink the back windshield tint on my 05 silverado? Or do I not have to since its a flat windshield?

[@prodjay10]

You shrink tint if glass is curved.

[@dadpoolonyt]

I have a 13 nissan altima, how'd you get it so perfect? I have the pre cut tint package coming too. Any secrets to make it work successfully?

[@anthonybracamonte97]

Get it done by a professional

[@RigginTheRod010]

Wish you guys sold the higher quality film for the pre cut stuff

[@mrhaggard364]

Make sure when you order its 2 ply... the single ply is the worst

[@basscaddy1449]

Nice!! Are you a professional tinter ypu made it look easy!!

[@basscaddy1449]

I have stickers on my rear windshield. Do I need to remove those to do the shrink on the rear 🤔

[@basscaddy1449]

I bought 5% precut for my 2007 dts from amazon!!

[@flippintexas1131]

What kind of glove is this guy wearing?

[@johnlowery8942]

What kind of yellow squeege is that your using

[@nikola_stijakovic]

The best video.

[@jmecillakennedy7102]

What name brand film are you using?

[@homefront3162]

My Suv issue is the door opens up so i have wrk upside down

[@mrbillpurcell6203]

why the heat shrinkiing, is it cheap film,

[@Imperial-E36]

The heat shrinking is for the tint to get the curve of the window when you install it, since back windows aren't flat they have a curve just makes it easier for installation. I work at a tint shop and they explain why heat shrinking is important.

[@FadeToBlackLLC]

Like Imp said you have to mold the film to the shape of the glass

[@s559tja]

this dude must have realised he forgot to tint this customers window at 4.50 pm lol

[@djdlirio]

what % did you use here?

[@TintXfilm1]

It is a 15% Dark tint shade! You can purchase Complete pre-cut window tint kit and Uncut roll of film from us at www.LexenAuto.com by LEXEN TINT SHOP, MD 21228 443-315-5047

[@djdlirio]

lexenauto what is the blower for?

[@FugaConManolo]

@@djdlirio heatgun is to shrink the tint. Something that has to be done even if the tint is pre-cut.

[@sniperking305]

Can you explain while doing please ?

[@JBIRD575]

Does that big yellow squeegee scratch or does it have slip tape on it..???

[@TintXfilm1]

we use Teflon slip tape. works good on any hard plastic cards.

[@pxndxlunx5821]

Hey, i noticed you didnt rev up your engine before doing this, "professional" sure you are lol JK, nice job

[@jeremyb2907]

I know someone that has a KZbin channel that says that lol

[@JBIRD575]

Where can I buy Teflon slip tape ???

[@JBIRD575]

Baby shampoo or dawn???

[@abnergarcia6837]

YOU MAKE IT SEEM SO EASY , im struggling with the shrinkin process

[@FadeToBlackLLC]

Just take your time and work in sections. Watch the film react to the heat before you card it down.

[@flippintexas1131]

What type of glove is being worn when shrinking the tint?

[@cr.k]

good

[@MsSoccerdude101]

what percent was that?

[@TintXfilm1]

it is about 20% tint

[@MsSoccerdude101]

lexenauto so no heat needed

[@elny29]

Um ... One glove?!? So totally unprofessional lol Just Kidding man! Good Job

[@curtb3871]

So, he doesn't explain anything of what he's doing or why. What a lousy instructional video. Seller of Lexen sent me here so I guess I'll be buying fron someone else

[@Yamaha-uz4ow]

He did better then most, but still that's not quality at all for sure a amateur tinter. To perform a good quality job you need proper tools which he didn't have how about invest in a yellow turbo squeegee proper tool to squeegee windows not a blue max, amateur tinted for sure, an how about installing the back window rolling the film it will come out cleaner an less creases you expose the film to dirt when u install it the way you did also tint 101 never put your tools on a customers car an don't drag the cord on it either treat it like your own especially if your making a video I rate this video an this tinter 4 out of 10

[@Rectifiable]

Only apprentices go that fast. No real quality with that speed. Put some heart in your work... Are you on drugs?

[@LightningMAS]

precut are for beginners... Handcut buddy is what I do!! And that's an easy ass car.. Altima .lmao

[@TintXfilm1]

Please watch our short video of How to hand cut and apply window tint film kzbin.info/www/bejne/lYLEi6SXmthgjac kzbin.info/www/bejne/epTQm4OuZcygaa8 i also do both hand cut and computer cut!

[@TintXfilm1]

i also do both hand cut and computer cut.

[@larua4]

Dude, chill '-'

[@LVTHORAscending]

If you do tinting then why are you watching a video how to do it? Lies.

[@KENI.07]

He did rear window for 9 min and he is beginner?! Professionals wouldn’t watch video “how to tint your car “)

[@calefrequena9106]

What % tint is this?

[@JBIRD575]

Where can I buy Teflon slip tape ???

[@TintXfilm1]

LLumar has it!

[@JBIRD575]

@@TintXfilm1 ok thank u