How to install Audi q5 trailer hitch - for 2018 and 2019 models

Check out the Audi Q5 trailer hitch at:
torkliftcentra...
This Audi Q5 trailer hitch fits the 2018 and 2019 models. There are other years available at our website too.
The Audi Q5 hitch designed by Torklift Central EcoHitch is extremely unique to other Audi Q5 hitches on the market today. The receiver sits immediately below the bumper which means you will have no loss of ground clearance, plus it is barely visible. Other hitches on the market have a cross tube that hangs below the bumper which is a huge distraction from the sleek design of the Audi.
This Audi q5 tow hitch is also rated at 750 pounds tongue weight at the trailer ball and 5,000 pounds towing weight. This trailer hitch features the same weight ratings for both the 2018 Audi Q5 and the 2019 Audi Q5.
The Audi Q5 hitch is made for towing and for carry bike racks or whatever cargo you are expecting to take with you. Even better? You don't have to have fabric support straps that connect from your hitch and wrap around your trunk to achieve these weight ratings. This hitch is designed and tested to meet the highest towing ratings all in itself.
The Audi Q5 trailer hitch is no drill - that means it is a direct bolt on application.
Trailer Hitch Part number: x7397 (2”)
Torklift Central
EcoHitch
315 Central Ave. N.
Kent, WA 98032
800-246-8132

[@betavhsvcddvdblueray]

Hi, can you tell if the very same product fits to Q5 2022 model?

[@torklift_central]

It sure does! Here is the direct link: torkliftcentral.com/2018-audi-q5-ecohitch

[@teufel173]

My local audi dealer quoted me 5 hours in labor cost to get this done. When I questioned the amount of time it would actually take, I was told it actually takes longer than 5 hours, and I was getting a deal. It is possible that this installation could actually take that long?

[@michaelsimmons5371]

Did the audi dealer quote for the factory kit or an after market kit. Factory kit contains wiring module which recognizes a trailer is attached and checks lights for you plus a number of other things. I don't see on this video any wiring. and the hitch is installed differently from the factory hitch. I looked at the factory installation instructions and 5 hours is a deal.

[@mikeliban573]

what brand & # of hitch ? is there a need to cut and trip some of the plastic below bumper to accommodate the receive tube ?? Some hitches need to cut plastic and some do away with the bumper support beam - neither is desirable, IMO.

[@torklift_central]

Hello mike liban! This is a Torklift EcoHitch and the part number is X7397. There is no trimming involved in this installation. Hope this helps!

[@MaratMukhamedyarov]

Does it fit 2018 Audi SQ5?

[@torklift_central]

@@MaratMukhamedyarov Hi there Marat Mukhamedyarov! This part number is confirmed for the 2018 SQ5. Hope this helps!