How to install Bio-Time 7.0 Software and basic programming Part 1 ZKTECO

[@ahmdnaube3745]

Bro can you make a detailed video with example on how to use payroll function in BioTime 7.0/8.0 please?

[@eddyvalsonjeanlouis9559]

where do you think i can download older versions of zkbiotime ??? because i've been searching for a while now

[@qeewoi2441]

Good job mate. I have an access control related question. How do I set the system so that it automatically disables a person( for example a staff) from accessing a certain area after a certain period, let's say a month?

[@fuadmaayeh8813]

Which report would show the total hours worked for each employee for the whole period specified or end of month, the reports I looked at do not have gross totals only per day, also how do we go around setting up attendance rule including calculation item, this part is very confusing.

[@yoyongyoyong550]

kabayan... paano gumawa ng timetable na ang check-in ay 08:00PM at ang labas ay 04:00AM ng next day?

[@mwangimaina54]

can a device like u270 be accessed in different computers. how can one activate the employee acess to the server as biotime 7.0 refuses only one is able to access the app n thanks

[@gerech08]

Mwangi Maina yes you can sir. [phone]

[@erickwesinyarkoh3692]

thank you so much. Please is biotime 7.0 compatible with ZKTeco Pt600?

[@emerydelrosario2987]

sir pwede po ba mag tanong kc ung basma namin gaya sa na featurd nyo sa blog nyo problema ko po is ung palm basma ng mga tao pg na enroll na sa device at ni xync ko na sa computer eh after tom nawawala ulit kelangan mo ulit cila e enroll ano po kaya ang remedy dun? pa help nmn thanks

[@irfansiddiqui9611]

I'm unable to find ADMS option inside com configuration menu. My device is zkteco uface 800. please help

[@gerech08]

You can find ADMS option in the communication.

[@ameenmajeed5696]

I have a ZKTeco HB20 device. It does not auto detect. ADMS or Cloud is also not present. How can I use BioTIme with my device?

[@snaggythedog1241]

hi po, may error po lumalabas kung inoopen ung server controller. ng tiningnan ko ung error log, may ganito " File "mysite\settings.pyo", line 569, in get_customer File "ooredis\mix\dict.pyo", line 45, in __setitem__", ano ung gagawin?

[@kyonaboineyusuph1581]

I am having an issue with the overtime hours showing in the report. please help on that.

[@ShokiAli_UK]

What MB20 Posible to conect from an other city's and network? Using this

[@DavidEParra]

Hi, thanks for the video . i would to know how to activate the zkteco UA300 licence also how to enroll fingerprint

[@gerech08]

David E. Parra please contact me in whatssap [phone]

[@KidsShowtimeOfficial]

Bakit hnd maupload ung data at maSync ung data sa device. Lumabas na default area attendance device no allows the current operation. Paano ito issolve? KC Meron kaming current data sa device kaso d nmn ma sync.

[@mohammadsolaymanali4858]

Very helpful video..Thank you

[@9633802742]

my company have to time shifts morning 7.00 to evening 5.00 and evening 5.00 to morning 6 how can i set the schedule so that checkin in and check out should come automatically

[@suhaybosman978]

thank you sir we are a greatly appropriate this helpful video

[@01110aDz01110]

Hi thanks for the great video. Can I build this server then use it for multiple clients or is it meant to be used for single client? Also are all ZKTeco time attendance devices compatible with Biotime 7.0 or is it only specific devices?

[@gerech08]

you can use also for multiple client

[@elinipendomziray1377]

@@gerech08 can you please send me the folder for setup to me . [e-mail] because I have tried to download it and when I opened it it gives me the error that it can't open and file is invalid.

[@jay-archristophercirujano3580]

@@gerech08 is this compatible with windows server 2012?

[@edwardmakabling418]

Kabayan nasa City Center Ka pa? Gusto ko kasi itanong kung pwd ung bio-time naka install over WAN..

[@gerech08]

Wl n kabayan. Oo pwd ang biotime s WAN

[@edwardmakabling418]

@@gerech08 Kabayan meron pa. Trial lang ung biotime na kasama pag bumili ka ng Device sa city center. Saan pwd makabili ng license? limitd lang kasi function ng biotime pag trrial

[@mohinudeenmahrouf2153]

Hi bro, I am not able to connect my machine (zk biopro sa40) to biotime 7.0 The status is offline. I am able to connect to another software( the middle East software from zkteco) and also I am able to access the device using ip address from the browser.. Please help!

[@fuadmaayeh8813]

where are the exported files saved in, it only says export but does not show where it is saved

[@jinggoybelino2578]

sir tanong lang po compatible po ba ang zkteco x628-c to biotime 7.0

[@misbmcc2913]

Goodpm kua, ask lng po nmin meron din ako uFace800, kaya lang ayaw nya magsync ung device sa BioTime 8.0, paano po ba gagawin

[@renjithknair7724]

helpfull video..Thank you

[@pasaloofficial1923]

kabayan, gusto ko sana ma access yung biometric from home. paano ang setting?

[@FJBOSS]

Great

[@shajuelayi4273]

excellent explanation......

[@ajeshkoroth8192]

very helpful detailed video Thank you.

[@mianzaheer1981]

Default area attendance device not allowed the current operation! how to solve this

[@jaysonrosales2768]

Sir, ask kulang paano e config yong ZKTECO MB300 sa Biotime 8.0? advance thank you sir and God bless

[@AbdulRahman-fd5ht]

Sir In my case the machine status is "red" color and not able to communicate with the device from web login

[@shahzad4455]

I am trying to add F22 in BioTime but it's showing disconnected state, IP is of same subnet, I can ping F22 terminal. If I use Are from Unauthorized to some other, it shows warning but device still remains disconnected. Can you guide about this?

[@Slam53music]

Hi, I have same problem with f22, spend all day but still no connect, did you solve this?

[@marcomoukarzel]

Hello are you still in Riyadh I need to setup BioTime

[@suhripanaraag6194]

Sir ginaya ko lahat ng instruction m dito ok naman may kaunting trouble lang ako sa attendance report kapag nisearch ko wala lumalabas pero sa transaction mayron..may lalabas lang na report if ilalagay ko sa “first In Last out” na option pero sa “Schedule logs walang report na lumalabas...do help please.

[@gilbertkimeu1355]

Hi , I have installed biotime 7.0 and device pro mv30. status is red in bio time. can somebody help?

[@vamshisanju6676]

Hello rechie. How can download to usb attendance. We did download but can’t open in pc. Can u send me how to do

[@geoffreymungai7895]

Thanks a lot. From Kenya.

[@CapturEdmark]

Pano import/export ang .mdb to sql para dyan sa biotime?

[@zaki1133]

Hi my friend I have in my machine model mb10 I didn't find ADMS OR CLOUD SERVER How can I solve this issue All is i see ethernet and pc choices

[@vipinkrishnan5313]

Can we add zero infront of empolyee id

[@magicbyfuad9922]

Do you have the BioTime 7.0 payroll setup?

[@gerech08]

no. payroll set up for BIOTIME is only Basic

[@mqamarudinafghan4954]

Hi sir how we salove this problms that my zkteco7.0 device not communicat with zkteco app in lan help me this massage will appare (defaul area attendance device not alowd the opperation!) thanks

[@carloroberto5687]

Compatible ba sya sir sa WL20? Salamat

[@habeshinfo9489]

We have a problem our system bio time 7.0 our staff it comes absent how can help me

[@mbagalakongowe4350]

does this also work on UA300 zkteco devices?

[@gerech08]

yes.

[@sidhiqkhalid7634]

@@gerech08 can please give the steps in UA300 machine side.

[@seeking7662]

Helped me a lot. Thanks man

[@haliqamarketing6322]

i have an issue. i have put the true ip address but the device didnt appear in the homepage

[@gerech08]

How about the port and and the firewall

[@gerech08]

[phone] You can contact me through whattaspp

[@troll4026]

Nice!

[@pasaloofficial1923]

na detect naman yung device ko kaso naka yellow exclamation point yung status. pls. help

[@adnansaeed4480]

How to set the monthly payroll configuration on biotime 7 software

[@gerech08]

Sorry sir but the payroll option function was already removed by the Zkteco due some errors.

[@ahmdnaube3745]

Rechie Delegencia - I have a question...

[@gerech08]

Yes sir. What is your question

[@ahmdnaube3745]

@@gerech08 Do you have any video that teaches on how to do payroll setting in BioTime 7.0 or most importantly in BioTime 8.0…? It seems very confusing.

[@mohammadsolaymanali4858]

thank you so much. thank you so much. thank you so much. thank you so much. thank you so much. thank you so much. thank you so much.

[@mirwaisabdullah2567]

Hello Bro How can Upload personals users information to Device can you please help me

[@vamshisanju6676]

How to download attendance report from device to usb xls. And how open in pc without any software Please explain

[@philipboyonas5253]

can you share me the link to download 7.0?

[@mohammedfarazuddin5405]

how can i import the data which i exported to USB from ZKt U270 to this software and generate attendance report

[@gerech08]

Mohammed Farazuddin ahmed muktar hi sir, please contact me On my number in whatssap [phone]

[@rkmenon8011]

@@gerech08 , hai i tried to contact you through this whatsapp number but its not visible for me

[@muzaffar999]

it is asking sql server username password and port ??? what it is i have to insatall mysql server first???

[@jamespalin9808]

Sir? how to manually add the device to the biotime. kc wala options dun sa device para sa cloud server. nag try ako add sa device manually hindi nmn xia connected.

[@gerech08]

James Palin kpag wlang cloud or adms option ang device mo ibig sbihin nd support ang machine mo need to update the firmware

[@jamespalin9808]

@@gerech08 ask lang sir? ma erase ba ang mga data sa device if e update ko ang firmware? para nd kona kailangan mag backup?

[@DiyarJamal]

Thank you Sir, I connected but I could not sync data to device and How I can add an employee with fingerprint?

[@vannakheng]

yes I met the same problems

[@augustogd]

@@vannakheng me too

[@sultansaeed2717]

Thank you very much

[@zabedhossain11]

Does it work with windows server 2019 ?

[@gerech08]

Yes

[@ahmedmuktar]

Hello Friend, Thanks for the tutorial, I have issue with the fingerprint reader, Biotime 7 won't detect fingerprint driver I am using windows 10, when I want to register an employee, my device is U270, it works perfect with Zktime 3.0 it detects the fingerprints but when I tried with Boitime 7 and 8 won't detect the fingerprint reader driver, thanks

[@gerech08]

[phone]

[@rkmenon8011]

while check in time , a error is coming failed to verify.error!invalid time period, how to solve this please help me.

[@gerech08]

Arab Chem Chemical please contact in my whatssap. [phone]

[@gerech08]

I'm going to connect your pc.

[@hamoodyss1]

Hello Thanks for this beautiful video, I have a simple inquiry! How do I connect the program to the Internet, I booked a hosting and created a database, and installed the program on my PC and contacted the base on the website, but how can I browse the program via the address, so that the program works at address 127.0.0.1 The URL of example My site is 42.25.40.100 and port 1433, but it does not work in the browser Thank You ....

[@gerech08]

Thank you for watching my video. so anyway your concern is how to connect or access your device remotely. then all you have to do is to make PORT FORWARDING using DYNDns. you need to port forward the IP ADDRESS of your PC and the PORT.

[@hamoodyss1]

@@gerech08 thanks for your reply I did it via the service of DYNDns But I could not browse the program, as it converts the router page

[@gerech08]

i will update you

[@hamoodyss1]

@@gerech08 Thank you brother, waiting for you

[@gerech08]

@@hamoodyss1 via local access or viewer the biotime software using the DDNS, you cannot access. only outside from the network.

[@mosesdwana9555]

thanks very mush!!! you save my day

[@MUHAMMADUMAIR-qx8ze]

can you share the download link for software

[@edwardxhirem911]

default area attendance device not allowed the current operation...how do yu solve this error please it is stalling me

[@gerech08]

you need to create new AREA only. then change the default AREA

[@rkmenon8011]

@@gerech08 , i create the area but how to change default area

[@MuaadElSharif]

How can I import device log into server. Please help~!

[@gerech08]

You need to create a database server sir

[@BirhanNega]

do you skip database configuration wizard

[@gerech08]

Birhan Nega no i didn't

[@BirhanNega]

@@gerech08 but it is not visible in your video

[@gerech08]

@birhan nega. I make defualt the database

[@anowerhsahed1091]

How to add BioTime with iphone

[@abuazouz1227]

sir paano naman un status nya ayaw my green red lang siya kapag inoopen kahit nakaconnect naman anu kaya possible reason nya?

[@gerech08]

ابو عزوز عبد الرحيم البيلاروز need to e synchronized ung machine s software at creat k n area.

[@gerech08]

Kapg ayaw padin may mali s settings or my kulang

[@elonmusk6029]

At this time I can't find biotime 7.0 software

[@dexterrosales5817]

IS the software for free?

[@javedanwar1122]

Hi my zkt F18 is not connected to software

[@gerech08]

just check the settings in your pc and the firewall try to turn it off

[@stevejackson1080]

where you add user

[@zubairahmed6588]

thanks bro...

[@cawilbenebene]

Thanks,

[@nsecnsts4933]

What's the default password for the database?

[@gerech08]

123456789

[@phenix129]

thanks very mush!!! But, Need help

[@parayilsalim]

Not connect with device. how to connect

[@gerech08]

Thank you for watching my video. so anyway your concern is how to connect or access your device remotely. then all you have to do is to make PORT FORWARDING using DYNDns. you need to port forward the IP ADDRESS of your PC and the PORT.

[@sidhiqkhalid7634]

Using UA300 and there is no edms

[@gerech08]

sidhiq khalid UA300 is not supported.you need to update the firmware of your machine

[@alricalforque6224]

sir i have biotime 8 im having trouble to the device.

[@gerech08]

Hi sir. What is the issue of your software