How To Install Blum Undermount Drawer Slides

In this video I will show you how to install Blum undermount drawer slides in your next cabinet project. After watching this video, I am confident you can jump right into installing these on your own. Whether you are using a face frame, frameless with overlay, or frameless with inset, this video is for you.
Slides I used in the demo:
amzn.to/3vtaqMB (Affiliate Link)
Rockler Undermount Drilling Guide:
www.rockler.com/rockler-jigit...
#drawerslides #undermountdrawerslides #blum
Find me on social media!
Website: www.bentswoodworking.com
Patreon: / bentswoodworking
Instagram: / bentswoodworking
Facebook: / bentswoodworking
Bent’s Woodworking is Sponsored By:
Harvey Woodworking - Go check out the Gyro Air G700
bit.ly/bwharveywoodworking
Bent's Woodworking is Proudly Partnered With:
Festool USA - See everything that Festool USA has to offer
bit.ly/bwfestoolusa
Bessey Tool North America - The only clamps I use in my shop
bit.ly/BesseyNA
Bits and Bits Company - Save 15% on your order with the code BENTS15
bit.ly/bitsbitsbw
Hartzell Hardwoods - Global suppliers of terrific hardwoods like walnut, oak, hickory, and ash. bit.ly/hartzellbw
Bent’s Woodworking Affiliates:
TSO Products - Some of the best woodworking accessories on the market tsoproducts.com?aff=5
Jay's Custom Creations - Shop Jays vast collection of plans and templates jayscustomcreations.com/produ...
Axiom Precision CNC Machines - See what Axiom has to offer www.axiomprecision.com/?acc=1...
Rubio Monocoat - See all the finish options Rubio Monocoat has to offer www.rubiomonocoatusa.com/#ben...
Affiliate links to items used in this video below:
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Camera and Audio Equipment I Use:
Canon 90D - amzn.to/2Rl9vKM
Canon 10-18mm Lens - amzn.to/2Tk21dP
Rode Wireless Go - amzn.to/32yBzz4
Sigma 18-35 f1.8 Lens - amzn.to/2NEi2Ye
Neewer Monitor - amzn.to/2RuXket
Pergear Tripod Head - amzn.to/2sIkAgS
Neewer Monito Batteries - amzn.to/30GGnSz

[@selcukbugan3769]

the best explanatory video you can find on youtube!!! Finally someone who explains it down to the smallest detail and especially on the most important things like e.g. the dimensions, the distances, how to measure it exactly, etc. I think it's absolutely great! Thanks for that. I'll definitely leave a like and a subscription there.

[@bentswoodworking]

So glad you found it helpful.

[@selcukbugan3769]

@@bentswoodworking you can't even imagine how many videos I've watched on youtube on this topic, but nobody, absolutely NO ONE has gone into as many important details as you have!! everyone shows how to install the drawer slides in the body and then puts the finished drawer in, my grandma can do that too😊😂especially the distances, how you have to measure them, what dimensions are important and you have to pay attention to them, etc. are you explained and showed the most important thing excellently and your videos are great. Thanks a lot for this. Sorry for my english 🙈😊 Greetings from Germany!!😊

[@christiansloth7879]

Agree...so many videos where you are left with all the essential questions.!

[@brianmulwa6813]

​@@selcukbugan3769i

[@justincowen441]

To locate the position of the locating pins in the rear of the slide, just install the drawer and lightly slams it a few times and the pins will leave an interference mark. Then drill your hole. No need for an expensive jig.

[@roberttietjen5012]

They make a jig that can be used on all the drawers! I do custom cabinets that can have up to a hundred drawers, I don't have the time for that ridiculous way!

[@mvred100]

This is the best instructional video on KZbin. You will understand if you have looked at Blum's instructions for glides or hinges. Blum should leverage this video.

[@bbirdiebirdie]

Thank you Jason. This is exactly what I am trying to do and your video is giving me the confidence to actually do it.

[@bentswoodworking]

Go for it!

[@Personalized_Workshop]

From, “the only video you’ll need to see”, I’ve appreciated this video for reference on numerous occasions. Although I can’t keep up with all of the latest Festool tools and accessories featured in more recent videos, I still find the work assembling table and awesome features entertaining to watch. After nearly a year after ordering the Blume undermount drawer slides, I’m finally able to complete the cabinets with drawers.

[@woodcoenergy6235]

I work with industrial furniture/appliances and I have to say this is the clearest explainer video for any piece of equipment requiring assembly I’ve ever seen . Great job 👏

[@albertoormeno3554]

There is only one thing that I want to say: Thank you, this was one the most clear demonstration video about this drawers slides !

[@msix79]

Thank you for this video! After hours trying to decipher what Blum calls “instructions” I ran across your logical explanation of how to measure, cut and install these drawer glides.

[@bentswoodworking]

Glad it helped!

[@davidschneider3118]

I can’t tell you how hard I’ve looked for a comprehensive way of installing these drawer slides over the past three weeks your timing couldn’t have been better thank you Jason

[@bentswoodworking]

I spent a lot of time too and could never find one that explained it in detail. I hope you found it helpful!

[@dporrasxtremeLS3]

@@bentswoodworking YES!!! Thanks for all your research and efforts!

[@buffalosoldier7360]

Bent, you’re one of the best instructors out there. I’ve watched many others on KZbin and like many of them but your voice and pacing work real well for me, thanks.

[@bentswoodworking]

Appreciate that

[@terichampion1165]

I completely agree!!!!!

[@jeffberg2010]

I go back to your video’s over and over just to review and pick up what I missed the last time. You talk about subjects I need to know about and you do it logically and slow enough that I understand your message. (Most of the time, my error not yours.). Unfortunately I can only like it once but I’ve watched then many times. Thanks for putting this content out here. I really appreciate it. And, Thanks for your Service.

[@bentswoodworking]

I’m so glad to hear that you are finding value in the videos

[@pemccollum]

Great video, very professional and accurate. Can't thank you enough for taking the time to do this and share your knowledge - you have a natural talent for this, my friend.

[@jensenjoinery]

This is really an incredible guide. The instructions look so intimidating. I appreciate you “distilling” them

[@bentswoodworking]

Glad you found it helpful!

[@OakHillMillworks]

Fantastic video, Jason! So I bought the 563H slides at the beginning of February and overthought them forever. I read and re-read the installation instructions. I’m so pumped that I knew every single thing you talked about. I’m a much more hands on learner and so once I just got started, it was easier to conceptualize. I did the dry fit in my cabinet as well before assembling the drawer boxes. Great job on this video. I’m sure it will help tons.

[@bentswoodworking]

I’m so glad that you enjoyed it!!

[@thehappygnome]

The most crystal clear explanation out there. So good, I subscribed.

[@danblanchette5201]

I owe you, Jason. Your expertise led me to the right tools and setup to get my designed coffee table with a drawer off to a great start, and now proceeding to a great finish. One caveat: my 5 mm self-centering bit is bent (out of the box) so putting in the drawer slides took extra care. Thanks so much!

[@sawdustadikt979]

What a great tutorial. I got a built in job and I’m trying these out for the first time. I really stepped in it this time. That’s a lot to keep track of compared to conventional tracks. Well, that’s my fault for not researching things before I offer them. Nothing else to do but follow through. I took a lot of notes am I’m super happy I found this video to clarify things as I go.

[@argdkc2002]

Great video! Don't forget about the side-to-side adjustment wheel below the hook on the back of the right runner. This allows the rear of the drawer to be adjusted in the same direction as the front so the drawer runs parallel in the opening. Also, if you're having front locking device engagement issues (i.e. the drawer isn't "clicking in" like it should), check your material thickness. Most 1/2" plywood is actually 12mm and this causes your runner to "stretch" further than it was designed. The quick fix for this is to make your box 1/8" shorter than the standard runner length (20-7/8" for a 21" runner) or add an 1/8" spacer between your locking devices and drawer sub-front.

[@15provost]

I've used a variety of drawer slides with absolutely zero information and guessed or searched the process on how to do it. Your detailed explanations far exceed what the manufactures put out. I'm going to be switching over to this product now because of your masterful approach. Thank you.

[@bentswoodworking]

Glad it was helpful!

[@Cutebutnotpetable]

I decided to build a keyboard shelf underneath a standing desk that I made. Found the two drawers with the Blum sliders already installed at Habbitat and searched all over KZbin to find out how to install them. Much appreciated, sir.

[@Gazman299]

This is perfect. Thank you for the calm and easy explanation. In a few weeks I'm going to build myself a new at-home office desk, and these slides will help me to up my game a bit in the drawer department.

[@bentswoodworking]

Glad it was helpful!

[@patrickdunn8918]

That was without a doubt the MOST DETAILED under mount Blum video,,,you really delivered on that !! The explanation on details was the best! Thank you sir.

[@bentswoodworking]

Glad you enjoyed it

[@terichampion1165]

I cannot stress enough how superior your videos are compared to others. You have truly found your post retirement calling. Thank you so much.

[@bentswoodworking]

Thank you. I retired in May and this is all I do now.

[@user-gp2vy7fj1k]

Fantastic video. Thanks for taking the time to create this. As a DIYer this sure saved my a lot of time and aggravation. A picture (video) is certainly worth more than a thousand words!

[@johndavidanderson5954]

Huge help! I was stuck without this video, thanks!

[@bentswoodworking]

You're welcome!

[@bretthollenbeck812]

Thank you so much for doing this video. I too was a little intimidated by these drawer slides but your video makes it look much easier than side mount, especially when it comes to actually installing the drawer. Matching up the slides on each side with side mounts is a real pain. This is definitely the best video I’ve found explaining this process. Thanks!!

[@bentswoodworking]

Glad it was helpful!

[@ritebass]

Thanks for this Jason. Just finished my first Blum project and love those slides. Your video was a huge help.

[@bentswoodworking]

So glad to hear that.

[@ThomasLykins]

Great video Jason. Very informative. The extra detail that you give makes all of the difference to those of us that don't have the experience.

[@bentswoodworking]

I’m glad to hear that you found it helpful

[@bradsmith1046]

Terrific rundown Jason! You are a natural instructor. Much appreciated.

[@bentswoodworking]

Glad you found it helpful

[@Ihaveaboyfriend]

Thank you for this one! I've learned the hard way on this. And a 5/5 star for including measurements in mm aswell. So from all of Europe thank you 🙏

[@stevemcdonald8572]

Hey Bent: thanks for your video. I was able to use the Blum slides I ordered, with help from your video. thanks, steve

[@eduardomartinez4446]

Thanks buddy… I’m a very visual person and with your help I feel more than confident to build and install my drawers!!! Thank you again!!!

[@bentswoodworking]

Glad you found it helpful

[@christinaforakis1024]

Hello Bent! This was a great instructional video. Thank you for taking the time to help us do-it-yourselfers! Getting ready to install 6 drawers and your instruction was perfect. Thank you. Christina

[@bentswoodworking]

Glad you found it helpful

[@paulmurphy3735]

Simplified and Brilliantly explained. As mentioned, best KZbin video out there to demystify the installation process. Saving this into by favourites. Thank you

[@bentswoodworking]

You're welcome!

[@bryantTheFatBadger]

Great job Jason. As someone with crippling imposter syndrome, but is renoovating my kitchen, including building cabinets from scratch, you made these undermount slides I purchased seem extremely approachable. I've always used side mount hinges, but I decided to invest in the these nice slides, even though I was intimidated.

[@bentswoodworking]

They are a pleasure to use! Glad you found the video helpful

[@tomreese1336]

I see another Festool Junkie like myself! Thanks for the best instruction I've found for these slides. I've used side mounts on projects until now, but was intrigued with these, so decided to use them first on a nightstand I'm building for myself first. Thanks for the very clear examples and explanations!

[@user-zq4zi2zk6o]

Great video. Easy to follow and makes lots of sense. These Blum undermount soft close slides are so smooth and require very little opening force to overcome the soft close feature (damping force). It's what everyone is asking for these days. Thanks!

[@jayf9259]

Jason, thanks for demystifying the installation of the Blum undermount drawer slides. I have been hesitant to try these because Blum's literature on installing them isn't all that clear, so I thought they'd be really difficult to install. Your step-by-step instruction in this video gave me confidence that I'd be able to install them without too much trouble or confusion. Thanks again!

[@bentswoodworking]

Glad you found it helpful

[@richardshaw3094]

You are a natural teacher. Thank you for sharing

[@bentswoodworking]

Thank you so much!!

[@mikewaters6980]

Just a super helpful vid mate. Clearly explained and the visuals r on point.

[@dalemcqueen5483]

This is a great video not only for the specific Blum slide but for other under drawer slides, they are all generally the same. Great Video sir!

[@bentswoodworking]

Glad you enjoyed it

[@user-wy5ik6zq4r]

Your video was perfect timing for me. I’m working on a desk and I’m using Blum slides for the first time. Thanks great info.

[@bentswoodworking]

You’re very welcome

[@crabdiver5151]

Very informative and well organized! Thanks for the time you spent making and posting this video!

[@bentswoodworking]

Glad you found it helpful

[@thosk4114]

Very clear explanation; one of the best instructional videos I have seen on KZbin (and like many of us, I have seen quite a few...). Well done.

[@bentswoodworking]

Glad it was helpful!

[@jjaafar]

THIS. IS. EXACTLY. THE. KIND. OF. VIDEO. THAT. I. WAS. LOOKING. FOR. Genius!!!!

[@bentswoodworking]

Glad you found it helpful

[@tylerwilson5938]

This was incredibly helpful and informative. Thanks so much for making this!

[@bentswoodworking]

You’re very welcome

[@jerryroot6447]

Thanks for the very easy to follow demonstration! I'm getting ready to build and install drawers in a cabinet box, I only had to look at one video to learn how to install the Blum drawer slides.This video made me start following your channel.

[@jochippyy]

Absolutely brilliantly clear, thankyou so much to the best teacher in the world!

[@bentswoodworking]

Wow, thank you!

[@thomlipiczky9021]

Very helpful. Your clear video will make the next time I do undermount slides so much easier. Thanks!

[@bentswoodworking]

Glad you found it helpful

[@michaeldubartell8991]

Thank you so much! This was very informative and really helped in understanding the mechanism, how to install and how to troubleshoot.

[@tooln8r844]

Thanks for the tip to turn the cabinet on its side when installing slide fasteners. I can’t believe I never thought to do that. 🤔

[@bentswoodworking]

Works great! A lot less headaches

[@getdirecti0ns]

Wish I could turn the house on its side to install the upper cabinets 😂

[@LostBoyLA]

The cabinets get mad when you do that though

[@heatherthompson1973]

Thank you! I will be installing these this weekend based on your instructions. Great job explaining.

[@bentswoodworking]

Glad you found it helpful

[@paulbrownell8050]

Great video. This is the second time I have watched as I have been thinking seriously about undermount versus side mount. I make my drawer boxes with dovetails and I know that I'll have to make some adjustments as a result, but nothing serious. Thanks again.

[@steveschultz300]

WOW!!! I am so glad that I found this video. My wife has been requesting pull out drawers for the pots and pans cabinet. I was just going to blunder in with my knowledge of regular drawer slides.....HEH. Looks like I need to get a couple of new tools for this project!

[@bentswoodworking]

So happy that you found it helpful!

[@darrellwalker1934]

Thanks, this is very helpful. I'm going to use these slides for shelves that slide out (don't want side mounts, don't want to give up the space). The instructions are very centric to a drawer, but now seeing how they go on I know how to adjust for a flat shelf. You rock!

[@bentswoodworking]

Glad you found it helpful

[@timacosx]

Outstanding video, very helpful! Thank you!

[@StevenLapidus]

This is an excellent explanation of how to assemble my drawers and most importantly how to install the Blum under undermount slides. Thank you so much!!!

[@bentswoodworking]

Glad it was helpful!

[@gregorysnow295]

Wow! The first time I've seen a video with metric measurements being used or mentioned. Thank you.

[@bentswoodworking]

You’re welcome

[@williamparker6649]

Thank you so much between your video and building a test drawer, I now understand this drawer glide system very well. Your video was amazing and a giant help!

[@bentswoodworking]

You are welcome!

[@lrr1952]

Great video! I have never installed drawer slides, but the Blum look very nice, and pretty straightforward after watching the steps you ran thru.

[@bentswoodworking]

Glad you found it helpful

[@SuperOxygenTV]

Thx for an incredible video. Made installing my first undermount drawer slides a little easier. Keep teaching...so I can keep learning!

[@bentswoodworking]

Glad you found it helpful

[@tommycrossman6297]

Thanks for this video. Having never used these Blum undermount hinges, I was a bit intimidated, but I went out and used some scrap pieces and everything went perfectly. The Rockler jig is must and made it super easy. again, thank you!

[@bentswoodworking]

Glad you found it helpful

[@smooth_ops2942]

The rockler jig is what i use everytime i install undermounts. I use K&V slides as its more cost effective, and they work just as good.

[@michaelbailey9643]

One of the best channels on KZbin. Thanks, Jason!

[@bentswoodworking]

Wow, thanks!

[@jonesnyambane326]

Great, simple and clear instructions. Thanks

[@SirLesMeyer]

I started to use these drawer slides from Blum in 2006 when building my kitchen. I have never looked back.

[@youngsun6617]

Literally a perfect explanation video. Thank you

[@grahambrown5874]

This video is very useful and your effort in making it, appreciated. Although I studied the Blum documentation, this video put everything into context and made planning and ordering easier. The only thing I couldn't work out is if the slides will work with 18mm drawer sides. This is what all the main panels of the wardrobe are cut from.

[@billballeza377]

Brilliant! Best instructor/instructional video anywhere!!!

[@bentswoodworking]

Thank you

[@terrylynn8902]

Outstanding video, Keep up the good work.

[@sergioavila3876]

Beyond helpful! Thanks for taking the time to do this.

[@bentswoodworking]

You’re very welcome!

[@joeklein9754]

Jason this is by far the best and most detailed video on assembling anything that I have seen. I will now embark (with confidence) on installing Blum undermount slides thanks to you and your video. I will also go to the Blum site and get their manual which looks like it has a lot of valuable information in it. Rest assured that i will be sharing this video and your web site with all of my handyman and wood working friends. GREAT VIDEO, I do hope have more and I have subscribed to your channel.

[@bentswoodworking]

So glad that you found it helpful and thank you!

[@alstruck8063]

Excellent video, thanks so very much for doing this. Made my install much easier and better.

[@miknefish1]

Opening minutes 1 5/8 is what I've always used for the front and back and it works great!

[@bentswoodworking]

Easier than 1 21/32 for sure. Lol

[@tylernettestad]

Right! That 32nd of an inch really makes no difference.

[@vernonlewis620]

Awesome Jason great help i am so glad i found you and your chanel

[@bentswoodworking]

Welcome aboard!

[@sailslikeagirl3154]

Really helpful, I know they are more expensive but your helpful advice has encouraged me to try them on my next build.

[@bentswoodworking]

I’m very happy to hear that

[@shrenikshah573]

Liked. Subscribed. Awesome video. Have been looking for a detailed video for my first undermount slide installation, but no one....and I mean none of them seem to have done as thorough a job as you have. Crystal clear explanation, great zoomed in shots and your sense of humor was enough for me to subscribe to your channel. Keep ‘em coming. And thank you, now I have gathered the courage to try my first undermount drawer.

[@bentswoodworking]

That is exactly what I was hoping for! I am glad to hear you enjoyed it!

[@GK-qz3cm]

Jason, thanks. Great video. This is now my new "try" thing.

[@markthorsen3467]

Why I will always watch and like your videos is not for the educational value, which is vast but no, rather for the fact that you have mastered the subtle art of being patronizing without being patronizing. I too am a student of this master craft.😄

[@bentswoodworking]

Well I hope I don’t come off patronizing 🤣🤣

[@djlalorocks]

I have to say, yours is the best one I have seen. Shaun Boyd and Jon Peters have pretty good videos too, but honestly I tip the reference video title to you. Thank you for making it.

[@bentswoodworking]

You’re welcome

[@JNWoodworks]

Awesome video. I have installed a lot of side mount, was just getting ready to do my first undermount. This video was a perfect overview. Thanks.

[@bentswoodworking]

Glad you found it helpful

[@imillsie426]

Clear, succinct and useful Couldn't be better.

[@bentswoodworking]

Glad you found it helpful

[@RobPagnano]

Well laid out instructions with solid visuals , easy to understand . Appreciate the info .

[@bentswoodworking]

Glad you enjoyed it

[@jbratt]

I think a majority of the views of this video are me rewatching it every time I need to install these slides. Thank you.

[@terryloubelle]

Your video helped me install my Blum slides on a new vanity I am building. Thank you!

[@bentswoodworking]

You’re welcome

[@billjensen7832]

Great video - for the first 15 minutes of your video I was like "ohhh hell nooooo" - until you got to the box install and then it all "clicked" for me, ha get it? The adjustments are super helpful and you explained those really well. Thank you for your videos, you do a great job with your level of detail without laboring the points. Nice job. Cheers from Wisconsin.

[@CoffeyCustomBuilds]

Killer breakdown dude!

[@bentswoodworking]

Thanks brother, I appreciate it!!

[@HermannKerr]

I always liked the idea of using under-mount drawer slides but it always seem so confusing. Thank you for showing that it is not that difficult of course, but it doesn't lower the price.😊

[@bentswoodworking]

Glad it was helpful!

[@MrCjswim]

Very good video. I am one of those that needs to know why for everything (drove my parents crazy) This video was perfect. Thank you.

[@syedomar261]

Thank you sir. U r the Man. Appreciate u for ur clear explanation. God bless you

[@mcampbell66]

Thank you, thank you!! I have needed this training! Great details and visual. Also appreciate all the subtle jabs at the trolls..

[@patriciapieton8644]

very, very helpful, thank you so much!!

[@philjacksonphoto]

Lots of good Casework Karma for you for making this one, thanks for taking the time :)

[@emailrobertbm]

One of the best videos! Thanks

[@chrisnash2154]

You made a complicated process look simple. Thank you.

[@bentswoodworking]

Give it a shot!

[@peden34]

Wow! Awesome video! You need to continue to do these types of videos, you are so good at explaining it. Please show ticks and tricks for your Festool tools, love the collection!! Shane

[@bentswoodworking]

More to come!

[@bobeighmie1972]

Fabulous video! Thank you for your detailed demonstration.

[@bentswoodworking]

Glad you found it helpful

[@aurawindsurfing]

Thank you very much for this video! really well put together and explained!

[@bentswoodworking]

Glad you found it helpful

[@rastouffar781]

I use the university of youtube often and you sir, are excellent at this. Thank you! some van cabinet stuff would be really popular i bet.

[@bentswoodworking]

Glad you found it helpful

[@kirill_gusev]

Good, comprehensive instructional video, Thanks!

[@bentswoodworking]

Glad it was helpful!

[@saltydawgcebreros6066]

Very good video. I switched to the Blum under mount drawer system exclusively. Much better quality and easier to align drawers. They cost more but, worth the money. Thanks for the video.

[@bentswoodworking]

Glad you enjoyed it