CHECK OUT THE FULL DMAX BUILD SERIES HERE :) -> kzbin.info/aero/PLloptHW8MGGhzVQRkJaMUeCIUh5ZEplfB
@joshuabarry35652 жыл бұрын
I can't believe how these new cars are just held together with clips and screws, be crazy not to get a bar installed. Great video clear information 👌
@philruhle35372 жыл бұрын
You have taken the mystery out of installing a bar. I think people will now know if they are able to install one themselves or not. Also the mystery of the broken foot. Thanks for putting your body on line, another great video.
@JoshuaDragon222 жыл бұрын
Argh. Where was this video 5 days ago. You make it look so easy I could have installed it myself and saved $600. Great video as always mate. Keep ‘em coming.
@VideoShowMeHow2 жыл бұрын
Arrg ah well
@thataussiefisho63972 жыл бұрын
Definitely no hoop is the go. Especially with how sexy the dmax front already is designed. Keep that mean look and still have the protection of a bar. I’m currently looking at the ambush bars for mine when it comes but we’ll see what happens because this one is mint 👌👌.
@VideoShowMeHow2 жыл бұрын
Yeah def love the lights etc on the front end of these
@HDGHOLD2 жыл бұрын
Love this style and reckon this would be plenty for my needs. Thanks so much for these videos, love how thorough you are going through each step.
@VideoShowMeHow2 жыл бұрын
Cheers!
@sr2019922 жыл бұрын
This video is definitely encouraging to give it a go yourself. Personally im more a fan of the hoops, either way this video has helped heaps
@zt12432 жыл бұрын
I managed to score myself one of these bars! I'm so excited to give it a crack once it arrives using your vid as a guide. I'd also just like to say a big thanks on behalf of the entire VSMH community. Your videos are informative and of great quality and all your efforts are appreciated greatly :)
@VideoShowMeHow2 жыл бұрын
Thanks 👍
@jakerichardson88812 жыл бұрын
Can i ask how much the bar was Z T?? Im also looking at one.
@zt12432 жыл бұрын
@@jakerichardson8881 I paid $1140 including delivery. Couldn't find it on the Cane Toad Equipment website but they have an ebay store that I bought it off
@jakerichardson88812 жыл бұрын
mine arrived today same thing ebay store
@zt12432 жыл бұрын
@@jakerichardson8881 Mine has some scratches on it unfortunately. I contacted them and they told me they'd refund $50 so I could go and buy some paint and respray it myself....
@gusbulmer27782 жыл бұрын
Had my DMax is May 2021 and absolutely love it. Next mod is to install 40” light bar
@ryankinninment83182 жыл бұрын
Well that didn't look as hard as I expected!
@robertarmbruster56502 жыл бұрын
A great video, the new bar looks OEM and video detail was exceptional. It appears you did not use the additional cushioning edge strip you showed earlier, I think it would have made the side look better at the bar interface to the mudguard arch strip. A big fat rubber all around the top of the bar would fill the gaps really well. Even though the side of the bullbar to the mudguard at the side aligns well, the gap looks a little large. The VSMH in the bar grill is a really nice touch.
@VideoShowMeHow2 жыл бұрын
Thanks mate 👍 yes it's a balance between the gap, really gotta have 10-20mm for vibration particularly across proper corrugations. Have tried a few different edges now, you can see on the lights vid today, just have the side gap for the.moment reckon looks the goods
@donks53062 жыл бұрын
great video mate, very easy to follow with clear instructions.
@Anthony-Parsons2 жыл бұрын
Lookin good mate. Keep up the great vids.
@julianperuch92772 жыл бұрын
As an Auto Mechanical Engineer and a career in many fields, doesn't make me an expert, we all should know what an expert is? For whom believes or thinks that they know every but a knower of nothing, meet many of them, LOL. Definitely an EXCELLANT and informative break down and refitment vid. BUT! If you are going to fit a Winch Bar because to go through this process, why was not a WINCH fitted at the same time as it shouldn't be an afterthought considering fact of again "removal" required. As to you mentioning Glass House Mountain "Tracks" I know that area... Also, using the chair was a good idea, I have one better!! Do you have a floor jack, Remove the Lift Plate, make a "H" frame with attachable arms " to fit any Bull Bar" it can be bolted to the jack. then you can position the bar with ease. Make this and you will have more friends. LOL. Considering I made one for a mate some long time ago and in his opinion / great Idea. I was thinking of a Patent. Anyone can do anything creative. Like my father use to say /upstairs for thinking / downstairs for dancing and in-between your problem .... Cheers
@TurtleWurdle Жыл бұрын
Probably due to the fact not everyone can afford 6-7 grand in one go with a bullbar and winch, I highly doubt there would be much difference, or else they wouldn’t put them on after if it could potentially effect the vehicle in the future
@philiplucky71702 жыл бұрын
Great work Adam
@dylanalphonso39432 жыл бұрын
Hey mate loving the dmax videos! do you have a link for the all in one fog lights?
@VideoShowMeHow2 жыл бұрын
Hey mate, no unfortunately came with the bar
@TheScrawley12 жыл бұрын
Another great video. Can I ask you what your thoughts are on the Dpchipx you fitted. Thanks, Shane.
@VideoShowMeHow2 жыл бұрын
Hey mate cheers 👍 Yeah still a fan, has made a good difference to driveability. Still have the follow up vid to release with findings etc (waiting for trailer to get back to so I can do the last bit of the vid!!)
@TheScrawley12 жыл бұрын
@@VideoShowMeHow Thanks, I'm considering getting one before we do our big trip with caravan.
@zarajoe12 жыл бұрын
I don't know if your still reading these comments but if you are how have the lights been going with the side brackets removed. I recently fitted a full bumper replacement bar and had to remove those black brackets on the sides of the headlights that attach to the bottom. I found that the lights are a little wobbly after removing them. I remembered this video and came back to it to see you also removed yours. Was removing the side light brackets something you were concerned about or has everything been fine?
@VideoShowMeHow2 жыл бұрын
Hi there, yes have added light brackets on the sides just after the install, I'd recommend adding some. If the bar you got didn't include them you could make up a pair pretty easy, just need some flat alloy/1.6 gal, then 2 small bends and couple of nut and bolts.
@zarajoe12 жыл бұрын
@@VideoShowMeHow thanks for the reply. Going to have to look into doing something about it then. Little annoying
@VideoShowMeHow2 жыл бұрын
@@zarajoe1 yeah, over time would no doubt stress the headlights and also likely run on that back corner imo
@zarajoe12 жыл бұрын
@@VideoShowMeHow yeah noticed the light is now resting on on the quarter panel. Making a bracket should be easy enough fitting it without removing the bar is going to be a bit of fun
@jdoubles2 жыл бұрын
Hey Adam, any reason why you went for just the one recovery point, other than cost? I'm picking up a pair tomorrow, and I've already got a Maxtrax static rope I can use as an equalizer if I need to. Just keen to know your perspective. Cheers mate.
@VideoShowMeHow2 жыл бұрын
Hey, one would be fine, I just had access to purchase at the time from a guy on the forum. Am planning on grabbing another though as gives more recovery options 👍
@jdoubles2 жыл бұрын
@@VideoShowMeHow nice. Cheers mate.
@chrisobrien35742 жыл бұрын
Looks good, but no bar for DMax on the CaneToad site, I guess with the VSMH initials it's a custom build?
@VideoShowMeHow2 жыл бұрын
Yes, this isn't currently for sale, but may be in the near future.. will update the vid with the details if it does
@Shifty_Skins2 жыл бұрын
Check out the Offroad Animal Predator bar. As far as I can see, it's almost identical.
@outdoors53522 жыл бұрын
@@Shifty_Skins $3500 plus fitting? 😂
@carltonroberts1731 Жыл бұрын
Great video
@troyweatherup Жыл бұрын
Hey mate who makes that bill bar. I like the shape and layout. Do they make one similar for the Ford Ranger.?
@VideoShowMeHow Жыл бұрын
Hey, was a prototype from CaneToad Equipment, I think they sell them now though worth a look.. I'll find a link and update the description
@glenncross31962 жыл бұрын
Hey mate, Great bar any update if Cane Toad have this in engineering and will be bringing it to market?
@VideoShowMeHow2 жыл бұрын
No update since I checked last, worth dropping them a note
@rayg12322 жыл бұрын
Looks good I’m also looking at one for my new dmax. I saw the caravan that you tow with the dmax can I ask what size it is? I have ordered one for delivery end of 2022. Keep the videos coming
@VideoShowMeHow2 жыл бұрын
It's a 24ft, about 2.8 t
@deanbarber66352 жыл бұрын
Is this bull bar available yet too the public?
@jakerhodes900211 ай бұрын
How do you find the cane toad bullbar? I'm in the market for one and have just stumbled across their hooped design one.
@VideoShowMeHow11 ай бұрын
Yeah still running it, it copped it on the cape trip but still good, you'll see more of it in the upcoming winch refresh vid
@lindsaybrown58972 жыл бұрын
sic! love it
@jeffgreaves1559 Жыл бұрын
Hi whats a rough price for a bar like that please
@craftbeerscapade83862 жыл бұрын
Some great vids VSMH ;) Gee i hope they bring out a bar for the 2022 MUX. The price for the bars are great. Is it a strong bar compared to other similar bar?
@VideoShowMeHow2 жыл бұрын
Same material, good welds etc, I'm happy with it and love the tucked design :) Have a few extras to bolt on shortly, selections have been made, vids underway 😁😉
@MP-hf3jn2 жыл бұрын
What are you doing with the factory plastic bar?
@VideoShowMeHow2 жыл бұрын
For sale, one blue front bar, never been on the beach, one lady owner, highway KMs only.. 😁
@MP-hf3jn2 жыл бұрын
@@VideoShowMeHow wish I live closer, I would of bought off you.
@gregford59912 жыл бұрын
G'day, where can I buy that bar. And how much, looks perfect
@VideoShowMeHow2 жыл бұрын
Was a prototype mate, will update if he starts selling
@gwhite618 Жыл бұрын
Just wondering if anyone has a long term update on these bars? They appear to be a Chinese bar that are sold under several different brands with minor changes between brands?
@VideoShowMeHow Жыл бұрын
So far so good on mine, survived the cape trip a ok, have been using the winch as well. (a fair bit on that trip)
@gwhite618 Жыл бұрын
@@VideoShowMeHow Thanks for update mate. How long is the slim cutout in the middle of the bar? Just wondering if a 22" slim LED light bar would fit in there? How is the powder coated finish holding up? Any surface rust marks near welds etc. ?
@kevinpeacock41012 ай бұрын
Just wondering how tis bar looks 2 years on? any sign of rust?
@VideoShowMeHow2 ай бұрын
Yeah still pretty decent, have touched up a couple spots that I touched up in the bush but overall no regrets
@royalracerz59682 жыл бұрын
What brand bull bar is this?
@SirShorty19822 жыл бұрын
Hey mate, where did you get the LED lights from?
@VideoShowMeHow2 жыл бұрын
In the bar? They came with
@SirShorty19822 жыл бұрын
@@VideoShowMeHow ahh ok cool, sorry I thought you got upgraded LED lights, all good, thanks for the vid I am doing my bar this weekend and have some notes taken :)
@laloolhouvum1634 Жыл бұрын
It's pronounce as E-sue-zoo and not I-zoo-zoo. It's Japanese, alright. That's a very cool looking bumper, however without winch and light bar it kinda look naked.
@fastdevil77772 жыл бұрын
Pity its not for sale?
@jessetink37532 жыл бұрын
Awesome video champ. But that’s not my idea of a bullbar sorry. Btw what did you do to your foot? I hope you didn’t hurt it doing this video lol
@VideoShowMeHow2 жыл бұрын
Nah, broke it a month ago
@jessetink37532 жыл бұрын
@@VideoShowMeHow hope it heals quickly 😊
@zt12432 жыл бұрын
What's your idea of a bullbar..?
@jessetink37532 жыл бұрын
@@zt1243 my idea of a bullbar is something that stops the front end of my ute getting pushed in buy a kangaroo. What they built for
@jakemalficvision86832 жыл бұрын
What bar is that one
@SonicsnakeCNR2 жыл бұрын
How did you coat the sensors?
@VideoShowMeHow2 жыл бұрын
The sensor housing just couple of light sprays with matt black. Am going to be powder coating the bar so leaving them blue. Have painted the rear sensors and no issues
@troymeredith95287 ай бұрын
You usally dont have any friends when you need to work on car.only when its your shout at the bar.!!.