How to Install Can-Am Maverick X3 (72" Models) Front Limit Straps

Рет қаралды 33,015

Күн бұрын

Пікірлер: 43

@zackdenkers3820 Жыл бұрын

If you're currently trying to install these on an x3 x rs ignore the bs about positioning these to the rear of the suspension. It MUST be clocked to the forward side of the shock to fit and not have clearance issues. This will additional eliminate the impossibility of being able to tighten on side of the clamp because your shock reservoir is in the way.

@johngonzalez7435 2 ай бұрын

Those grill master dad shoes are putting in work with the toe lift technique!

@ShockTherapyllc 2 ай бұрын

So dad shoes. Your right 🤜🏼

@Workin1_az 6 жыл бұрын

So speaking from experience, it’s not so easy when the shock bodies are turned inward. Unless I did something wrong. The resi blocks the access to the Allen bolts on the clamp. I eventually got it, but I had to trim the rear plastic to be able to turn the clamp enough to get at the bolts. Love the product now that it’s installed!

@ShockTherapyllc 6 жыл бұрын

Yes, it is hard to reach the allen bolts unless you have a socket swivel version of the allen key! We also found mounting the clamps is easier if you remove the shock (just make sure it's angled properly).

@Workin1_az 6 жыл бұрын

Shock Therapy llc it’s been a few weeks now and have got some real world use out of these straps. Must say that I really love them. They do exactly what you’d expect and they look cool too! Looking forward to future products from you guys! Specifically the billet steering rack for the x3

@terryfrome1641 3 жыл бұрын

My straps are on the front side. Could not get the bilet holder on the rear. Does this matter. I assume it's fine because your DS X3 video are in the front.

@ShockTherapyllc 3 жыл бұрын

Does not matter 👍

@jakeglad 2 жыл бұрын

Why isn’t anyone mentioning the rigid lights in the wheel well!!! More info please! ps, will be ordering these for my xrs, great looking product and an excellent video

@ShockTherapyllc 2 жыл бұрын

Thank you. Both ridged and Baja have fender well work light kits. Helps when working on it at night.

@scottkeith7005 Жыл бұрын

I've got a '23 64 DS Turbo and I can't put the lower bolts in so the spacer is in the rear, comes in contact with one of my tie rods. Or is something incorrect?

@ShockTherapyllc Жыл бұрын

The strap is mounted in the front on the DS.

@raho24781 3 жыл бұрын

Will they work on Koni's, and custom length straps I HOPE 🙏IF SO ILL BUY THEM AS SOON AS POSSIBLE

@judithpearson9845 10 ай бұрын

Can you put your strap on OEM stock shock

@ShockTherapyllc 10 ай бұрын

Yes. Everything works accept the 2024 showa shock X3

@dougmoss9654 Жыл бұрын

Somethings have changed since they did this video there is no O ring anymore and you reuse the bottom stock nut on the supplied new bolt and spacer.

@ShockTherapyllc Жыл бұрын

Thank you fir the heads up. We will edit this video. 🤘🏻

@toddwolff1084 2 жыл бұрын

Will this kit work with a can x3 xrs turbo r with a 3 inch spacer lift on the shocks?

@shocktherapy4820 2 жыл бұрын

Yes as long as you have 1.5” room at the top of the shock fir the clamp. 👍

@aquiespantanmucho 4 жыл бұрын

I have 72" xrc with the fox tune for the shocks, the clamps dont get up to the end of the shock, I have to leave it like 1 inch down. will it work ?

@ShockTherapyllc 4 жыл бұрын

As long as you can adjust the straps short enough to holt the shock from extending all the way then your good.

@julianhiguera7314 4 жыл бұрын

Where is the video of rear installation

@ShockTherapyllc 4 жыл бұрын

Julian Higuera kzbin.info/www/bejne/eJeYYohnlq6ZZsU

@gustavogallegos8104 5 жыл бұрын

do you have to move ur shock outward (reservoir) out ???

@ShockTherapyllc 5 жыл бұрын

Gustavo Gallegos no sir. Works both ways

@Just_Joe71 4 жыл бұрын

Gustavo, you do have to move the reservoir out or you won't be able to tighten the collar around the shock. With the reservoir on the inside there is not enough room to get a hex key in between the reservoir and the collar. I'm going through this right now. Its a pia because now I have to cut my plastics to clear the reservoir under full compression.

@joecarabott9097 5 жыл бұрын

Can I fit the straps facing forward.

@ShockTherapyllc 5 жыл бұрын

Joe Carabott no sir

@joecarabott9097 5 жыл бұрын

@@ShockTherapyllc I have X3 xrs. Shocks reservoirs are facing to the inside. When I tried to fit them on the back side of the shock I could get my tools to thighten the screws. Can you please tell me how to install them facing the rear of the shock.

@Just_Joe71 4 жыл бұрын

@@joecarabott9097 you have to turn them out. Not sure why they say you can do it with them inside.

@nvricochet 2 жыл бұрын

@@ShockTherapyllc please elaborate on why the straps should not be orientated to the forward side of the front shock? When I bought my unit the previous owner installed ST straps in the forward position, so I would like to know the reason why I should reinstall them to the rearward side.

@ShockTherapyllc 2 жыл бұрын

@@nvricochet some models with some accessories have clearance issues with a front mounted strap. If it clears on your UTV it’s fine. We just say put them on the rear because that works for every model with every accessory.