How To Install Car Audio Speaker / Speaker System / Door Speaker Install - 2007-2016 Honda Ridgeline

  Рет қаралды 4,394

GT-Industries

GT-Industries

Күн бұрын

Пікірлер: 9
@vtsean5840
@vtsean5840 8 ай бұрын
This is excellent. Great detail and very well filmed as well as well lit so that everything can be seen clearly.
@AwesomeMan2696
@AwesomeMan2696 2 ай бұрын
What kinda of screws do you use for drilling in the door? You said 8mm but what’s the length? Also wondering if you could share what size drill bit you used for pre drilling! Im new handy work so any details would be a great help! Thanks for the video!
@GT-Industries
@GT-Industries 2 ай бұрын
As far as specifics go, we just used a 1/4" pilot hole drill bit and for the Screws we used standard self tapping screws of about 1/2" long. Nothing special really. Just get a Drill bit set that's rated for metal (wood ones won't work) and go to your local hardware store and get some self tapping screws and a matching driver bit to drill it in (IE: If it's a flat head screw, get a flat head driver bit) Hope that helps!
@AwesomeMan2696
@AwesomeMan2696 Ай бұрын
@@GT-Industries Thats super helpful, thanks for the quick reply and the info! Gonna work on this, this weekend!!
@droppincaskets9785
@droppincaskets9785 7 ай бұрын
How do you unhook the tweeters?
@RandoManFPV
@RandoManFPV 9 ай бұрын
I'm tryna instal 10s. The wires have to run from the speakers to my amplifier instead of my headunit. So I'm running new wires Any idea how to remove the rubber tubing that sheaths and protects the wires in the space between the door and the door frame(the closure area/doorjam near the hinges)?
@GT-Industries
@GT-Industries 9 ай бұрын
Depends on the vehicle but normally what we do is follow the manufactures guidelines on how to remove the rubber from each end (where the connectors actually go in the door) and use a stiff welding wire to run the wires inside that rubber along the harness. Once the wire is all run, simply reinstall the rubber on the connectors. (Typically the rubber simply peals away from the connector it's covering and allows you to push some pins or un-do a bolt to get the connector out but again, that's different for each vehicle)
@RandoManFPV
@RandoManFPV 9 ай бұрын
@GT-Industries gotcha thanks! I moved to the back doors and found like you said, tho stiff the rubber just peels back.
@smitty4699
@smitty4699 Ай бұрын
Dude, get to the point
How to Replace Honda Ridgeline Cupholder Foam (Ridgeline Part 2)
5:59
Every other Karl
Рет қаралды 35 М.
ВЛОГ ДИАНА В ТУРЦИИ
1:31:22
Lady Diana VLOG
Рет қаралды 1,2 МЛН
I Sent a Subscriber to Disneyland
0:27
MrBeast
Рет қаралды 104 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
Honda Ridgeline Sub install
6:19
East coast crew
Рет қаралды 24 М.
The BEST Honda Ridgeline Upgrades and Mods + DIY Lightbar Mount!!!
14:42
VentureTube Outdoors Camping & Fishing
Рет қаралды 81 М.
Ford Explorer 2010-2018 Aftermarket Radio Upgrade
9:03
CarNaviPlayer Support
Рет қаралды 866
2013+ Ford PI Key Fob Programming and Remote Start Enable
14:54
GT-Industries
Рет қаралды 8 М.
2006 - 2014 Honda Ridgeline Sub and Amp Install
12:10
Provo Beast Audio Installation
Рет қаралды 33 М.
Honda Ridgeline Gen1 Issues and Repairs
11:22
Trail Cairn
Рет қаралды 40 М.
ВЛОГ ДИАНА В ТУРЦИИ
1:31:22
Lady Diana VLOG
Рет қаралды 1,2 МЛН