How To Install Cobra 29 LTD Classic CB Radio In A Peterbilt 579 Truck

[@bobbyvandiver3682]

Turn the receive(RF GAIN) all the way up. And turn the SQL down until you hear static. Then bump it up until static is gone. Good video.

[@aaronjones3982]

All you have to do is remove the 3 black screws under the black tray and pull the tray out. Power wire supply are attached to plate. Install wires and cb. Shove it back in and replace screws. Much, much easier.

[@Worde_Smith]

Thank you. Your video was very helpful and I was able to install my Bright Pink Cobra CB.

[@jacobkotrola1310]

The only video that has details and is clear. Thank you so much.

[@carlitodeleon768]

Thank You Sir !! God Bless You !! I just installed the CB myself with your help of course

[@NeonGhostin]

Thank you for the video. My company just moved me to a similar Pete, and was completely lost and where to find a power hookup.

[@ericc4438]

Thanks for your helpful video. Got it installed in about 10 minutes

[@cbfortruckers7713]

Thanks for commenting!

[@joehinojosa2420]

Easy and simple instructions 👍

[@bigrigraider3691]

Best tutorial ever. Thank you driver. Be safe

[@cbfortruckers7713]

Thank you!

[@sethteutsch7804]

Life saver my dude. Thank you 🙏🏻

[@Pflap64]

Just got that radio, thanks for the tutorial.

[@Bargomorphic]

Thank you much for the instructions! However, how far does antenna reach out to (communication-wise, not actual size)?

[@chalkotb]

Is both lights (Rx/tx and ANT) light suppose to be red when I press on mic to speak out to others?

[@kelseywedge7167]

What did you do upgrade your cb

[@johnstender2201]

So when I was calibrating it my was reading between 2 and 1 and I was fallowing everything you where doing but when I go to transmit I will bounce up above 3 in the red what do I do?

[@jkunz27]

When you are transmitting, you are actually looking at the middle row, so if you are up near the top of the green on the middle row, you are good.

[@husiclutfi]

Hey great video .. but when I key the mike it’s going on red !? That would not be ok,right?

[@johnstender2201]

Mine is doing the same thing did you figure yours out?

[@husiclutfi]

@@johnstender2201 I watched some other videos and these other guys keep it on SWR.. that’s where I have it now .. don’t know if does any damage to cb but sure stays on green lol

[@johnstender2201]

@@husiclutfi do you also have any problems with both lights turning red when you hit the talk button?

[@husiclutfi]

@@johnstender2201 no .. only green light goes red when I key the mike

[@eliyahabraugh5469]

Awesome job even very easy to understand that exactly what I was looking for and more

[@adamsomodi3957]

Perfect! Thank you

[@kylerichardson1630]

You’re the man. Thanks

[@justinboswell1939]

VERY helpful...thanks!!

[@jimmysmith773]

Thanks I was wondering how I was going to hook up my cb

[@6xplosive]

It worked great ty 2020 pet

[@roberts3807]

Not how I would recommend doing it unless you want to sweat and curse for an hour and cut up your hands. Once you pull off the front fascia there are 3 screws facing towards the roof that you remove and then slide out the tray that holds both the SmartLink transponder and CB mount. Then you can access the binding posts easily and strap down the CB before sliding the whole mess back in there. The hardest thing is shoving 10 pounds of crap back in a 5 pound hole, best to cable tie some wires together and make the whole thing tidy first.

[@dragonmaster2482]

That's how I installed mine

[@NightcoreGamer64]

OK my question is, if I plugged into the external speaker port on the back of the radio will that go to my internal truck's speakers? Going to assume yes but I had a problem last year where I don't know what happened but I was only hearing the radio from the radio itself so whenever anybody would try to communicate with me I had to turn everything else down.

[@cbfortruckers7713]

Yes, the EXT. SP. port goes to your trucks internal speaker. The reason it's called EXT SP is because it means as opposed to an internal speaker inside the CB radio.

[@JoshuaSardinaTV]

So what happens if the swr is over 2? What do we do?

[@adamsomodi3957]

I drive a 579. I need to adjust my antenna please do a video

[@Jeff-pe2wf]

Is there a reason why mine may not be turning on?

[@justinbrooks4418]

Mines cal above 2 & 3 just brought it need help

[@Baaail]

followed everything even made triple sure the connections were in by pulling out the tray and no power not sure what to do..

[@Baaail]

just noticed my copper wires and showing and I don't have what looks to me metal caps like yours or the bronze exposed wires covered maybe someone swapped out the cable and returned it and I got screwed...

[@JPHamilton87]

For some reason, mine doesn’t have the part to plug in the electric component.

[@johnelkinrodriguez8296]

Great video!! Thanks

[@cbfortruckers7713]

Thank you!

[@yoshe40]

Thanks fit perfect

[@BRobinson28]

Nobody at truck stops could help me thank you

[@nickelsamuel9641]

Thank you 😊

[@MrTopgun5150]

Good install vid but ur rf gain needs to be all the way up and most likely the mic gain as well. Checking ur SWR’s does not change anything with the radio or antenna, its a test tool only. The mic needs to be right up at ur lips, that’s what rubber strip in the mic is for to be touching ur top lip as you talk. Later….TopGun123

[@gle5598]

My fuse keep blowing don't understand why

[@greghess6077]

That whole tray pulls out where you were putting the black and red wires

[@majesticpounds1486]

Yo we work for the same company

[@straightpride451]

That is a terrible location for a CB antenna. You're going to get a lot of RF reflection coming off the back of the cab. Also, it's going to hinder your transmit and receive signal, and the coax is very low grade.

[@cbfortruckers7713]

I know right! Seems like it should hardly work! But you'd be surprised how well it works. I even pull reefer and it still works great. It goes against all knowledge but sometimes the practical solution is the best solution.

[@zell666hell]

Exactly what I was thinking

[@Mouthpiece985]

Poor guy

[@tonypeterson822]

I think you better do you research better. You made a lot of drawn out vid on the charger info.

[@zell666hell]

Not a very good CB choice. And your CB antenna doesn't even go up over the cab like it's supposed to. You're gonna be severely hindered.

[@meganostra6633]

So, wait..why do you talk into the speaker thingy with the button, thats not where you hear people from?

[@swaburbore8865]

Awesome video. Thank you