How to Install Coil Over Sleeves!

[@Chakenios]

Thanks, nobody shows how to actually put the sleeves in the strut and what the O-rings and Allen locks do, thanks a million. Blessings!!

[@GoGetterGarage]

Carlos Holguin I’m really glad you enjoyed !!

[@95TurboSol]

This is exactly what I needed! I have a strut mount top bushing that went out but I wasn't sure so I tried tightening the nut at the top of my strut to see if that was making the noise and the strut top thread snapped off and I have to replace the whole strut. Leave it to me to take a 35 dollar repair and turn it into a 150 dollar one.. but i did learn something at least.

[@GoGetterGarage]

TurboSol dang man I feel your pain lol

[@AlvlUpSavedMyLife]

Great video. I like how you speak and explain over the video. Much people who make videos need to take notice... the only thing is instead of saying “that one” say the size :)

[@GoGetterGarage]

Thanks man, for sure I need to work on some of my wording. Make sure you subscribe to stay updated with more DIY's and projects vids !!

[@takafumiarisawa70]

I've always wanted to try Ground Control sleeves, they come with rated Eibach springs and for three hundo they don't look half bad.

[@lakaihernandez8420]

2023 watching this !!! Thank you brotha!!!🙏🏻🙏🏻

[@aycarambas]

Wonderful video. All the info needed!

[@Mish93Will]

Any updates on how the car rides on these? Do the normal shocks bottom out alot? Also just wanted to know if they are safe. They are universal so I'm confused how the spring rates are right for different cars and front to back. If they work nicely then that's pretty cool.

[@GoGetterGarage]

Honestly the car is rarely used but yes the shocks are bottomed out. Not sure how the spring rate works I just crossed my fingers and made it work lol

[@Mish93Will]

@@GoGetterGarage Ah thanks for the reply, okay so basically if you're going to be driving a car hard this is not the best setup for that. But great diy and very informative.

[@GoGetterGarage]

@@Mish93Will yeah honestly I would invest into some good name brand like function and form those are my favorite

[@freddyvalent9731]

Thankx for your vid, helped out alot. :)

[@deadbeatgarage]

Ayyyye! Let's get it! #dbfam

[@amandadaniel1180]

If the 3 small screws wasn’t installed on the sleeve… what will happen ???? Mine don’t have the 3 screws

[@whogotasprite587]

All right i’ve never done this, nor do i have a spring compression but fuck it i’ve had these sleeves i wanna put on my crx

[@andreyfraz7462]

Hi. It turns out that after installing these springs , your tire went into the arch and there will be no such thing as a tire lying on the arch ?

[@GoGetterGarage]

Like do you mean tucked in?

[@xaocha80081]

Did you use the oem shock? Or after market?

[@kingmendez8097]

Do u recommend to buy new struts an should I worry about rust

[@GoGetterGarage]

KingMendez yes because if you go low your going to feel it and your car is going to be bouncy.. they are really cheap on rock auto! I think I paid like $80 to $100

[@gaberuiz7867]

Go-Getter Garage can you install these to shocks?

[@jodyrowe8166]

Wait so what do those little grub screws do??

[@karlomisura2207]

Would you suggest these for auto cross? I'm making a budget autocross EK right now I have KYB Ultra SR shocks and H&R springs but the car is not low enough for me.

[@GoGetterGarage]

WhiteyEk3 no I would not recommend these coil sleeves get some lowering springs that will make the car more lower. Unless you get name brand full body coilovers but that will be kinda pricey

[@karlomisura2207]

@@GoGetterGarage Alright thanks for the info not getting these definitely :)

[@GoGetterGarage]

WhiteyEk3 yeah man good luck on your build and drive safe!! ☺️

[@Donediddat]

A brotha that washer you said not to lose , the one that goes on the very top , what if you don’t put that back on, what will happen?

[@GoGetterGarage]

The nut will eat the rubber bushing

[@Donediddat]

Question , if I only add the coil over springs in the front , what is the bad side of that?

[@sseli727]

Can I use these sleeves on stock shocks?

[@PARZ-]

Dumb question but does that gap between the spring and the top hat compress together when you lower it? 😂

[@GoGetterGarage]

Victor J yes lol I know seems kinda weird but yeah it does compress just make you put those two washer coz if not it will compress to much lol

[@izzacdagoon]

For sure an upgrade from cut springs

[@chicagobearsfan5026]

Is the hardware universal? Can I just add my own lowering spring?

[@GoGetterGarage]

ChicagoBears Fan yeah I mean the only thing is if you have cut springs then you won’t be able to adjust in the future. I would highly recommend to just buy them they are inexpensive.

[@Itsok-456]

Awesome video, did you have to use shortened struts, to not have the Shocks bottom out?

[@GoGetterGarage]

No I just used regular stock ones

[@chap142721]

Depending how low you go, you definitely will blow factory style shocks, get a set for lowered cars and you'll be fine

[@amadeoheron5948]

My car has struts in the front and regular shocks on the back can i install these coilover sleeves on the regular shocks or would they wouldn't work

[@myCarModsBestPrice]

love you mate like it

[@frfilmscapture2622]

These sleeves do they fit over stock struts/shocks?

[@GoGetterGarage]

FraggleRoc aerial & ground Videography yes the shocks I’m using are stock

[@legendeli2358]

My question is if you go off the 11th or 12 it’s going to sit lower or you have to go 8 or 9? Asking because I would prefer mine a little higher than yours. Thank you

[@GoGetterGarage]

Yeah that’s the good part about coils you can adjust it to your liking! 👍🏻

[@imprezaguy9958]

Very nice video man ! What are your wheel Nd tire specs? Any rub?

[@GoGetterGarage]

Thanks ! Im running 195/45/16 with 16x9 esm i had to roll the fenders but on honestly I love how flushed it looks !

[@imprezaguy9958]

@@GoGetterGarage thanks, i have shitty balloon tires on my 16x8's n need to get smaller ones when i lower it but i still need side wall. any recommendations? i was thinking 205/40?

[@GoGetterGarage]

@@imprezaguy9958 honestly I do not know lol I got lucky on the fitment bkus of my buddy that owned the rims before me.. Let me know how that works for you tho !

[@jrfilms5162]

Did you have to drill out the hole on the metal top piece or did it actually fit on the shock ?

[@GoGetterGarage]

It fit

[@GoGetterGarage]

Didn’t have to drill anything

[@zamandlaxulu1380]

Howzit, is it ideal to put sleeve overs on a Renault sandero 66kw turbo dynamique 2015

[@Buzaghma]

Greetings from Russia) I don't know English well, so I have to use a google translator) What are the sensations of driving? Are they tougher than stock? What is the maximum height you can lift?

[@alexdelaluz3738]

Anybody know where I can get some replacement Allen locks and orings?

[@Chinjengaming13]

Is the shock is good for running ?and not

[@solvyncntgamolosantos9357]

hello sir just ijnstalled coilover sleeves recently on my honda fit front struts.. but when i installed them even the lowest setting the front didnt "lowered" why is that ?

[@GoGetterGarage]

Hmmmm that sounds weird you sure the struts and everything stayed good?

[@Manolo-rr4rj]

Muy buen tu video y explico... Saludos. 🇲🇽🇲🇽

[@GoGetterGarage]

Emmanuel Juarez muchas gracias si te interesa subscribe para mas videos en el futuro ...saludos

[@Manolo-rr4rj]

Okidoki

[@bmwpapaalanrodriguezlocura8555]

@@GoGetterGarageamigo tengo una pregunta te lo agradeserias que me mandaras un mensaje ami numero porque en verdad la kiero solucionar 7028090135 vivo en las vegas cuando le doe vuelta al tornillo jira también el palo de enmedio

[@AngelPerez-ug3sl]

When I try to remove the strut bolt it just keeps spinning with the washer. What do I do????

[@GoGetterGarage]

Angel Perez you need an impact gun or sometimes your able to grab it with vise grips

[@AngelPerez-ug3sl]

Go-Getter Garage could I use an electric impact wrench ?

[@GoGetterGarage]

Angel Perez yes bkus with the ratchet it won’t be possible.

[@Y3ARxOFx53RP3NT]

Well update: watch out for certain kits on eBay like dna motoring. The top hats cracked on my car on the front end 🤬😡

[@Jay-vu2bp]

Can these fit on a 2001 Acura CL?

[@andredizon5805]

Automatic bang slammed nag lagay ng coil sleeve? Di nasya pwedeng taas?

[@sett215]

Hey man can you use these coilover sleeves on stock shocks?

[@GoGetterGarage]

thelonelydriver Yes, I used stock shocks but I would recommend buying them new 👍🏻

[@sett215]

@@GoGetterGarage oh thanks haha i feel like trying one on for my 1990 corolla

[@GoGetterGarage]

thelonelydriver those are soooo clean dropped ! Good luck man 👍🏻

[@sett215]

@@GoGetterGarage thanks man planning to get some next week heheh

[@Chinjengaming13]

Wow amazing #jensentungol car VLOGS and food VLOGS

[@avybz1387]

you put the adjuster on the wrong side the screws suppose to be at the bottom you have it upside down

[@GoGetterGarage]

a vybz if I were to put it the other way I wouldn’t be able to tighten those screws with out making modifications to the strut

[@mgrdigimarketing3035]

AN HOUR PER END, I DON'T THINK THAT IS YOUR TIMING 👍👌

[@edisonmariano4829]

Compatible for Toyota corona?

[@mgrdigimarketing3035]

Nice work with video dude. 👌👍 Your wheel nuts are 34? What? If you meant 3/4, it's pronounced three quarter 🤪😂🤣😂🤣 ONLY IN AMERICA 🤣😂🤣😂 INCHES IS AMERICA'S THING!!!!

[@Chinjengaming13]

Hi my friend hope you visit me see you