How To Install Custom Clippard w/ LED Lighting

#Howto #diy #ghostbusters
SAVE $3.00 On A RetroCraftBeards Clippard By Using Code GREGORS85 (Valid Through 5/24/24)
Get One Here: www.etsy.com/l...
In this episode, Chris will show you how to install and power a custom LED clippard from RetroCraftBreads! We used the stock board for this modification but removed the rumble motor entirely. Enjoy!
Alternative 100% scale actual Clippard valves for proton packs. These are a great option for something different than the original, and they are actual refurbished used Clippard valves. Labels are original, may have wear as they are used.
I have modified Clippard valves with a blinking light inside that links directly to your packs 5-12 volt battery power or 12 volt DC transformer power, they blink on their own once powered, no coding or Arduino needed. These are sold individually.
The blinking valves are available in cool white, warm white, red, green and blue. The exact model numbers may vary, but shape and size are all the same.
These are great options for full scale packs, or even spirit packs if you want a full size valve.
Follow Us On Facebook:
/ norcalgb
Follow Us on Twitter:
/ gregburke85
/ lannen707
/ nghostbusters
Ghostbusters: Spirits Unleashed is a fun, multiplayer game perfect for all skill levels. Four proton pack wielding Ghostbusters attempt to catch a Ghost haunting unique locations in asymmetrical multiplayer battles (online or offline). As players progress, they will unlock cosmetics and upgrades for both Ghostbusters and Ghosts to evolve their gameplay experiences. The look and feel will deliver to fans an immersive experience in the universe, allowing them to play out their Ghostbusting fantasies. Whether hunting or haunting, the game is easy to learn and fun to master!

[@spawndolan4578]

That was awesome!

[@the_time_chambers_edge]

Any suggestions how to split into one of the JST connections on the ninja tunes board to power a few low lowered LEDS? prefer it to come on with the pack and not have several battery packs scattered around.

[@PaladinChristof]

You want to splice it into the NT board? I would honestly go higher up, and splice it into the wiring harness for your battery pack. Batteries on, LED's are on, then you would hit the pack switches to bring the lights/sound on from there? Wiring is not really my specialty so I'm sure there are other ways to do it that may act more in line with what you want?

[@The_Y33TER]

yet again please learn how to say clippard 😭