How To Install Delta Shower Surround & direct to stud shower kits

Welcome to this instructional video on how to install a Delta shower surround directly to wall studs. In this step-by-step guide, we'll walk you through the process of installing a shower surround that will add style and functionality to your bathroom.
Before we get started, you'll need a few tools and materials, including a level, a drill, screws, a silicone adhesive, and of course, the Delta shower surround kit. Make sure to read the manufacturer's instructions and follow all safety guidelines.
The first step is to locate the studs in your bathroom wall. You can use a stud finder to help you locate them. Once you have found the studs, use a level to draw a horizontal line where the top edge of the shower surround will be installed.
Next, apply a silicone adhesive to the back of the shower surround. Place the surround against the wall, aligning it with the horizontal line you drew earlier. Make sure it is level and flush against the wall.
Once you have the shower surround in place, use a drill to screw it into the wall studs. It's important to use screws that are long enough to reach the studs and provide a secure attachment.
Continue attaching the surround to the wall studs, making sure it stays level and flush as you go. Use a level periodically to check that the surround remains straight.
After you have attached the surround to the wall studs, apply a silicone adhesive to the seams between the surround and the wall. This will help prevent water from seeping behind the surround.
And that's it! You have successfully installed a Delta shower surround directly to wall studs. With the proper tools and techniques, this installation can be completed in just a few hours, giving your bathroom a fresh new look and improved functionality.
Thank you for watching this instructional video. For more DIY and home improvement tips, be sure to subscribe to our channel and hit the notification bell to stay updated on all our latest videos.
#bathroom
#diy
#homeimprovement

[@RapidRepair]

Have you installed a shower surround kit yet? Please share your experience. The extra 2x6 stud blocking near the front was for the future door installation,...this is specifically called for in the manufacturer's instructions.

[@lovemykids993]

Have a question. I have a delta shower base and 3 walls that is caulkless. So I should not have to caulk? Any suggestions?

[@RapidRepair]

@@lovemykids993 yes these systems are generally designed not to need caulk. However in this video the manufacturer did call for some caulking at the very end of the project.

[@RapidRepair]

@@lovemykids993 If you have any reason to believe water is getting between the panels, I would caulk for sure. Make sure to purchase caulk that is rated for "plastic" shower surrounds

[@lovemykids993]

@@RapidRepair do you have a certain caulk that you recommend? This is my shower base and walls#’s 5041646 and 5041648. I should be ok not using any visible caulk? Would you mind looking into that? I appreciate your advice so much

[@RapidRepair]

@@lovemykids993 Yes I see your Delta model numbers, any caulk rated for shower surrounds is fine. The caulking is not really visible, because it's shoved inbetween the joints. This was the manufacture's recommendation.

[@TheCottonTop]

Looks great! Thank you for your guidance.

[@RapidRepair]

You are so welcome! 😊

[@MauriceColontonio]

Great video, thanks for taking the time to make it!

[@RapidRepair]

My pleasure! Thanks for the best comment I’ve seen today 😊🛠️🛠️

[@user-bw5xf3yr3m]

Simple detailed video god bless you sir

[@RapidRepair]

OMG. You made my day 👍🏼❤️

[@user-bw5xf3yr3m]

@@RapidRepair no you made my day, saved me a lot of time go through videos and still being confused thank you 🙏

[@MrRainbowrooster]

Nice job! Thanks for video. I was dreading the idea of leveling cement but the way you did it, Looks like I can use your method which I prefer. What label and brand was that and now that it's been a while, are you still happy with the result. I'm gonna have to be super-creative with my application for future potential valve and hose/fitting repair. I have to invent an access panel. Thanks again for the video.

[@RapidRepair]

Glad it was helpful! Any floor leveling product will work. I’m still happy with the quality. Good luck. You can do it 🛠️🛠️

[@ANXIETOR]

Shouldn’t there have been backer blocks added, all along top edge of surround, to screw drywall to?

[@RapidRepair]

Actually I do like that idea. I’ve seen it done like that before. This manufacturer did not call for anything like that. This kit is high-quality and really rigid walls.

[@nickl9461]

How did you do a vapor barrier behind the surround, if you used liquid nails to glue direct to the studs? Finding myself having to answer the same question on a project.

[@RapidRepair]

1. Vapor barrier was built into the wall insulation. So keep insulation / vapor barrier only inside the studs. You will need the face of each stud exposed. 2. This Delta system did use adhesive and screws. Has to be adhesive rated for plastics & shower surrounds. They are very popular and sold right next to the liquid nails. Good luck 🛠️🛠️

[@bigpearl2265]

How much of the pipe coming up of the rough plumbing do I need sticking up from the floor

[@RapidRepair]

The manufacturer recommends 1 3/4 inches max. However, you can run it as long as you want if you’re willing to cut it off later with a rotary tip tool.

[@chiragpatel1150]

How high the 2 inch drain pipe has to be from the subfloor?

[@RapidRepair]

I can’t remember off the top of my head. Your instructions in your installation kit or your shower pan should tell you. However, you can run extra long on purpose if you use the compression drain. That way the pipe can stick up through the pan and you can trim it with the pan already down… There’s some cool rotary tools for this. And then you just use the compression assembly drain.

[@RapidRepair]

OK I just double checked with Delta. If you have a delta shower pan, they are saying the PVC pipe should not extend up above the subfloor more 1 3/4 inch maximum…

[@charlesvinch595]

Though these shower surrounds needed no clauk, that's what Delta says.

[@RapidRepair]

If I recall our Delta instructions called for some caulking…wasn’t much though.

[@BelloCruz]

👍

[@RapidRepair]

Thank you 🛠️🛠️

[@markfradl]

"If the walls aren't plumb you need to adjust for that" -- how do you do that?

[@RapidRepair]

You use wooden shims. Your new surround should be as close to level / plumb as you can get them. Simply use shims between your studs and surround to make this adjustment.

[@markfradl]

@@RapidRepair Thank you!

[@carlthornton3076]

Very Good!... #36 {5-16-2024}

[@RapidRepair]

Thanks for watching 😊🛠️🛠️

[@danielleg2616]

Insulation and vapor barrier??

[@RapidRepair]

I can’t remember if it was shown or not. Yes there was R-13 exterior wall insulation with a vapor barrier.

[@nickl9461]

How did you do a vapor barrier behind the surround, if you were using liquid nails to glue direct to the studs? Finding myself having to answer the same question on my project.

[@montamang837]

Direct to stud might not need caulk

[@RapidRepair]

I didn’t think so either. However the manufacturer did recommend it in the installation instructions 😊🛠️