How to install Dualshock 4 TrueFire Flex V5 Modchip Gen 4,5 V2 - PS4

[@niight361]

That was a lot of hard work. Respect, I appreciate that

[@XQGaming]

Finally the video rendered properly 😄

[@samtee3319]

XQ Gaming Heyhey

[@psychenateic5905]

Man you beat me

[@willgaming9255]

XQ Gaming so there is a version one and version two controller am I right which require different connections and what is the difference between the different generations of modchips

[@XQGaming]

Check the top of the page: xqgaming.com/en/213-repair-parts Here are all the model numbers listed, Gen 1,2,3 V1 are older models with no lightbar in the touchpad, Gen 4,5 V2 are the newer models with the lightbar in the touchpad.

[@willgaming9255]

XQ Gaming thanks for the information Subscribed recently enjoying your content But what is the difference between the different generation mod chips

[@Yeetboii]

This is cool but i nearly had a mental breakdown over the music lmao

[@se7ensundays]

Hi Richard! I have a question, is it a must to install the RF button? Or can i omit it? Will that cause any malfunction? Basically I'm only interested in the remap buttons. Hope to hear from you soon. :)

[@AsimSiddiqui007]

Please made a demonstration video for Rainbow Six Siege. Many people will love you for that.

[@XQGaming]

I don't think I have the time, but I will keep it in my mind for potential future videos.

[@amorporcalopsita]

Hello, can you activate the buttons (X, Triangle, Circle and Square) in turbo mode to use in Fighting games ???

[@XQGaming]

You can do that with the DS4 Rate Up modchip Gen 1,2,3 V1 (only older model controllers)

[@passenger4422]

I did everything as in the movie, and after an hour of playing Rapid fire turns itself off. Resetting the settings did not help anything else. What is the error ??

[@ja.almighty]

Probabaly a bad connection you have

[@XQGaming]

Prob. circuits touching.

[@joonaalkula3455]

I cant get the rapidfire to work. Everything else works but R2 is just a single shot on rf and bf

[@wzpaYT]

Thanks for sharing. Friend I bought the same flex to install in JDM050 AND JDM055 but it does not work for me, I installed it in JDM040 and it works well, will you have any solution? Have a great day.

[@mitchellkennedy3556]

I'm trying to find a video where someone connects the M1M2 and R3R4 buttons. I believe you can add 4 "Mod buttons" on this board. I guess I'll find out...

[@crazyrici]

Hi I've try some mods,but the rapid fire was slow so I've try to program the pad,something goes wrong ,during the programming and probably I've fucked all because now nothing works ,just auto run works correctly,I see the green led when im pressing the autofire but shot normally,did you know how can I fix this problem? Sorry if im writing you here but did you know if exist some hard reset or something to return all to.the factory programming? Hope in a soon reply

[@ocoll3ciono222]

i would like to have this control to play call of duty ware zone, how do i have im of this, let me now please

[@liveonelife7602]

Good instruction!!👍👍👍👍

[@XQGaming]

Thanks!

[@geiveer]

Can I install 2 flexes at once? One for the mod and one for remapping buttons?

[@tobih1367]

Hey there is it possible to add 2 more paddles? To get 4 paddles on the backside? 2 extra remap buttons & 2 extra programmable remap buttons...?

[@XQGaming]

Then you would need an extra modchip but you could also do the non programmable remap straight from the board.

[@elcangry855]

Can you show how to do 4 tac with pro mapping

[@Marionerola]

Rapid fire the last of us Number excellent rapid fire?thank you brothers

[@kickinitwithpoc]

The basic install is for x and o buttons under the paddles right?

[@ja.almighty]

No please pay attention. Any button Can be programmed for the oaddles

[@XQGaming]

You would need the extra installation of M1 and M2 if you want to use the paddles.

[@frankishsauto-detailing4701]

Does anyone know what he is putting on the points before he solders? The like orange stuff? And if so is it needed

[@5KM5K]

Tim Frankish flux i guess, you dont have to use it but it when used the solders will be better as it prevents oxidation and thus makes a better connection so it is recommended. I soldered something in my ps3 controller without flux when I was younger and never had a problem with it, but I mean flux is pretty cheap so do use it.

[@XQGaming]

YEs it's soldering flux/paste. It helps connect the solder better.

[@JOSENILDO-xz4dm]

you would have the user codes manual ????

[@Gavin207]

What was the red stuff put on before the solder?

[@waskilo12]

I have a question whether the paddles are required for true flex v5

[@XQGaming]

Not for basic installation, only if you want the extra programmable remap buttons.

[@xSILENTNEMESISx]

How do i buy ? Lol and great work on the demonstrational video...

[@XQGaming]

Nestor Lopez link in description

[@mazenxx2154]

XQ Gaming Can I use different kind of buttons such as led buttons to look better?

[@XQGaming]

Sure

[@bowwow8512]

can you use electrical tape for basic install?

[@nickjewijchen]

Is the rf instal needed. Or can i only instal the remap buttons

[@XQGaming]

Rf is only a faster way then using the standard double tab dpad option, not required.

[@gregplay6143]

where do I buy the ready control?

[@dragotulej9465]

Hi do you selling controller with this mod builder?

[@silentpicklee2437]

Old video so I doubt I'll get a response from anyone. However; Can I use the V5 on the JDM-055 Motherboard? It says JDM-040 on the one I bought and all others I see. Just trying to figure out before I attempt.

[@reecepallett2596]

THE CALIX yes you can

[@Dwazeling]

Is this posible on first version of ps4 controller?

[@dantehooks1603]

My led does not turn on but the functions work but it's hard to tell what im doing without the led, anyway I can fix it??

[@Pr0ject2]

Did you ever figure this out? I've got exactly the same issue

[@dantehooks1603]

@@Pr0ject2 did you just install or did it happen over time?

[@Pr0ject2]

@@dantehooks1603 just installed like it

[@dantehooks1603]

@@Pr0ject2 so my problem was I didnt put the led in the right spot and also change your controller brightness to the lowest level, I'd take the controller apart and see if the led is working

[@Pr0ject2]

@@dantehooks1603 definitely the led. It's in the right spot. The blue led to say you're entering and exiting remapping mode works, green and red doesn't work though. None of the mod led work

[@RaQz62]

Where can you get the paddles

[@XQGaming]

Website link in the description.

[@notgabe4210]

do you do all of this before you ship or do we have to

[@XQGaming]

I sell parts or controllers with chip already installed.

[@larseichler8832]

Do you offer complete controllers to buy?

[@XQGaming]

Yes, they are on the website, custom projects can be done but need to be send via my website contact form.

[@XQGaming]

@Gorilla Gaming yes

[@XQGaming]

@Gorilla Gaming You want a prebuild controller? Send an email via our website noted to "controller builds" we can discuss details / shipping.

[@Dirtycris]

Can i use rapid fire on R1?

[@imadmbarki6351]

what's the paste's name?

[@spacegodzilla100]

Will this work on gen 4,gen5 v1?

[@XQGaming]

Gen 4 and Gen 5 I call V2, Gen 1,2,3 I call V1.

[@vivacemaru]

wire guage?

[@AsimSiddiqui007]

Do you sell on Aliexpress? Link?

[@XQGaming]

Only via my website.

[@nickvantwillert1]

Do you have the stl file ?

[@XQGaming]

I dont know what stl is.

[@supxchip]

Does this work for Apex?

[@CloroxBleach-zq6qh]

Hi axel

[@benmartinez7780]

Is there a voucher?

[@XQGaming]

Yes, I give them randomly via social media and hidden messages in my videos.

[@ziggygbolade4888]

Does it work on fortine

[@XQGaming]

Depends which option.

[@cholischafid8123]

Tested on bf1..?

[@XQGaming]

Cholis Chafid which mods in particular?

[@cholischafid8123]

Are All mods work on bf1 online..?

[@XQGaming]

All should work but NOT: jitter, auto spot, auto aim. All the rest will function in almost any game.

[@ricardogheorghe8025]

Yes las

[@biscoot4251]

Is it work on pc?

[@XQGaming]

Yes.

[@Papinegri2442]

Existing ps4 controller aimbot online multiplayer

[@Dirtycris]

?

[@samtee3319]

Heeeeee......

[@XQGaming]

I needed to cool my PC with ice from the freezer.. Now the video rendered properly :)

[@samtee3319]

XQ Gaming ha ok