How to install EYELETS on Leather, Fabric, Paper, Eyelet Punch Plier tutorial, DIY, Anita Benko

[@thecurioussquirrelreviews]

Yaaas! Someone finally made a video about these tools and how to use them. Thank you so much! You’ve helped me figure out how to attach my circular paper EV slides! ❤

[@AnitaBenko]

😊👍🏼🙏🏼🌸✨🌞

[@yuliastreasures]

The best explanation! Simple and clear, good picture, thank you!

[@AnitaBenko]

Thank you so much ❤️🙏🏼

[@cdthannah]

Thank you so much for easy tutorial! Very easy to understand and not so long to watch,.

[@AnitaBenko]

Thank you so much ❤️🙏🏼🌞✨

[@mkv8514]

Great tutorio, this is one of the best! ❤❤❤

[@AnitaBenko]

❤️🙏🏼 Thank you SO much. Glad it’s useful 🌞✨🌸😊

[@ingahappy7887]

I've been looking for this tutorial for very long time! Thank you, thank you, thank you 😊

[@AnitaBenko]

Aww, thank you. 😊🙏🏼❤️✨🌞

[@lindycarimbocas1039]

Thank you so very much. Very simple and to the point❤

[@AnitaBenko]

🌞🙏🏼❤️

[@Martina_BCJdesign]

Thank you so much, your video helped a lot! 🌞

[@AnitaBenko]

Aww thank you 😊🙏🏼✨

[@strawber_ri]

hello, i’m watching this from america, and i hope you’re still answering questions related to this! i want to start an upcycle project of allowing eyelets to be in neat, even lines on a t-shirt. would i be able to use the leather puncher on the shirt, or would i have to do the holes myself with scissors?

[@AnitaBenko]

@@strawber_ri thank you so much for your comment. 🙏🏼🌞✨ Don’t think hole punching pliers will work on Tshirt fabric. But you can try on a sample fabric maybe. With small scissors or seam ripper it will work. 😊👍🏼

[@OyinkansolaOsikomaiya]

Can i buy other eyelets apart from the one that comes with the punching set, would it work?

[@AnitaBenko]

@@OyinkansolaOsikomaiya each eyelet size need same size fixing set kit. 😊👍🏼

[@vickidowler6259]

Thanks a lot 😊

[@AnitaBenko]

@@vickidowler6259 🌞❤️🙏🏼😊✨

[@OyinkansolaOsikomaiya]

The eyelet punch pliers,do i need a bigger one for a bigger eyelet

[@AnitaBenko]

@@OyinkansolaOsikomaiya these pliers only go up to 5mm For bigger eyelets you will need manual kit: amzn.to/3YVPzlU

[@kristinaplisko1942]

Thank!

[@AnitaBenko]

@@kristinaplisko1942 🌞😊👍🏼

[@liroytito2472]

Does the eyelet punching pliers have specific measurements or they're all the same? Because I wanna buy a kit

[@AnitaBenko]

Yes. My pliers have: 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm Punching holes. These pliers are super useful for these size eyelets. Also for punching extra holes in belts. 😊👍🏼

[@AnitaBenko]

Here is my set: amzn.to/3TfKOQH

[@saidkho1243]

Thank you so much ❤

[@AnitaBenko]

@@saidkho1243 🙃❤️🌞✨

[@nanjung110]

thank you, your tutorial were short but cover many important things, now i'm more sure to buy my own plier myself ;;w;;)b

[@AnitaBenko]

Aww thank you ❤️🙏🏼 glad it’s helpful 😊👍🏼🌞✨🌸

[@FaffwithRaff]

Thank you 🙏🏼

[@AnitaBenko]

❤️❤️❤️🙏🏼

[@bmwvintageprincess]

Very useful thank you

[@AnitaBenko]

Thank you so much ❤️🙏🏼❤️

[@swisselle]

hmmmm... when you put the eyelets in, the bottom part goes on the one without the noob and the one with the noob is meant to punch holes (step 1, if you don't have a separate hole puncher). Didn't yours come with rubber rings to put over both parts to protect the eyelets from being damaged when pressing or was there an additional piece to swap the noob-one out for pressing them on?

[@AnitaBenko]

There are many techniques how to attach eyelets. And different style eyelets. On this tutorial I am showing how to attach a single eyelet. 😊👍🏼

[@Brandyp2010]

Thank you so much...

[@AnitaBenko]

You are welcome ❤️🙏🏼😊👍🏼🌞✨

[@OyinkansolaOsikomaiya]

Why didn't you use the hole punch for the fabric?

[@AnitaBenko]

@@OyinkansolaOsikomaiya because pliers don’t cut well through fabric. 😊👍🏼

[@horvathgabor5485]

Don't you need "washer" under the eyelet? Why?

[@AnitaBenko]

@@horvathgabor5485 not necessarily as these are 5mm eyelets. 😊👍🏼 For bigger size eyelets I would use washers 😊👍🏼

[@its_not_anna]

This is an amazing tutorial! Was just wondering if you know where you got the two tools from - maybe a link? x

[@AnitaBenko]

Thank you so much. 😊🙏🏼 I bought my set from Lidl- not sure if they have them still. I found same set on eBay for you: www.ebay.co.uk/itm/233944785161?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=X_IuMAaJS4q&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY Also it comes with snap poppers and snap popper pliers. 😊👍🏼 x

[@saphirmidnight7669]

Hi, I just want to ask. I already have the 5mm eyelets and the eyelet punch pliers. If I’m going to use bigger eyelets do I need to buy a bigger Eyelet punch pliers or is it applicable to all? Thanks

[@AnitaBenko]

Yes you will need bigger hole puncher. Or you can try to cut bigger hole with scissors carefully. 😊👍🏼

[@rowenabrady6279]

sorry only just saw this. why do you not use the little ring on the other side to the eyelet. i have found it to be neater.

[@AnitaBenko]

Becouse these eyelets are single sided eyelets. I don’t mind rougher edge on the wrong side. 😊👍🏼

[@domingojaniola6909]

pwede bang gamitin yan sa studs na butunis?

[@AnitaBenko]

Don’t think so. But here’s tutorial for metal button snaps: kzbin.info/www/bejne/gH-8g3iLpbWrrqcsi=kHf-AfblCilbSeua Plastic button snap tutorial: kzbin.info/www/bejne/fJKWmISNeK5jrLssi=EHepa0DWwRSyxMQH

[@iyanuoluwaajoke2752]

Hi my own eyelet machine refuse to open ..... just like you open the small one now I can't open mine

[@AnitaBenko]

Not sure what happened with your pliers. Sorry 😞

[@mimoarikikari]

I never know u suppose to make hole first before inserting an eyelet

[@AnitaBenko]

I always been doing it this way. It works for me. 😊👍🏼 also it’s much easier this way. 😊🌞

[@choaib5609]

شرح مميز. تستحقي كل التحية والتقدير.

[@AnitaBenko]

Thank you so much ❤️❤️❤️🙏🏼✨

[@slasher-hb9no]

Where did you get that set at? Would it work on latex?

[@AnitaBenko]

I bought my set from Lidl- not sure if they have them still. You can find these sets in any sewing/craft shops. Or online. I found same set on eBay for you: www.ebay.co.uk/itm/233944785161?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=X_IuMAaJS4q&sssrc=2349624&ssuid=14QcTYAKTjm&var=&widget_ver=artemis&media=COPY Also it comes with snap poppers and snap popper pliers. Yes it will work on latex. 😊👍🏼 If you work with latex- I recommend to try eyelets on a small latex sample first. x

[@slasher-hb9no]

@@AnitaBenko what size does the leather hole puncher has? And what size is the eyelets?

[@AnitaBenko]

@@slasher-hb9no it has 6 different sizes. I used 5mm eyelets. (It’s biggest size on eyelet puncher pliers)

[@slasher-hb9no]

@@AnitaBenko so the leather hole punch has 5mm?

[@slasher-hb9no]

@@AnitaBenko so what if it's a 4.5mm would the eyelets 5mm fit on the 4.5mm

[@SarukShekh-b2m]

❤

[@AnitaBenko]

🌞❤️🌸🌟🙏🏼✨

[@kataunpiroc]

🙏🏻👌

[@AnitaBenko]

🙏🏼🌞😊✨

[@saidysaf4674]

السلام عليكم السعر

[@AnitaBenko]

Thank you 🌞✨

[@AnitaBenko]

Eyelet pliers with eyelets: amzn.to/43Auf4m

[@starpoders]

Thanks Anita 😂😢

[@AnitaBenko]

@@starpoders 🌞✨👍🏼🙃

[@UrbanGeordie]

Thank you 🙏

[@AnitaBenko]

❤️🙏🏼👍🏼😊🌞✨