How to Install Fortigate VM on VMware Workstation - FREE Download Fortigate VM Latest Release

[@IgoroTech-Official]

For the latest version: NO EXPIRATION (UNLIMITED), Check the link below (with download link) kzbin.info/www/bejne/mKunhXl3rpKHl8U Please check this playlist for COMPLETE TUTORIAL with Version 7 - Step by Step Configuration: kzbin.info/aero/PLlEVCBdM7ELOSd9zLJNE3FrIMzZiWlSkm

[@PAZAK13]

Great video! I was confused about the NIC configuration on VMWare Workstation but now everything makes sense. Thank you!

[@ncodr]

Great video - just to note a slight error in the flyout graphic at 11:51 and 23:18 the commands should be per the video and not the graphic: 11:51 # config system ntp # set ntpsync disable # set type custom # end 23:18 # config system ntp # set ntpsync enable # set type fortiguard # end

[@IgoroTech-Official]

Thanks a lot bro! good thing you noticed👍😁 Apologies guys! its a typo and copy paste issue during the video editing. 🤦‍♂️

[@milestoneformula7979]

This is a great video for me because I'm currently working as a network engineer but I don't know how to configure the network and😮 how to restrict the public traffic. Thank you God for giving such a great video 😊

[@ajmal0394]

Best of best video i have seen in entire life in youtube tremendous in deep quite knowledgeable perfect perfect

[@askmethod]

Thanks bro. very informative. but using qcow2 image of fortigate on GNS3 VM is easier in installation and configuration even if license expired you can just make execute factoryreset it will reset and give you extra 15 days without edting any thing. thanks again. keep up🤝

[@msyoshimitsu1]

it's always a please to learn from you thank you

[@mannyteixeira2660]

Well explained and Thanks for your effort

[@ngabomarcel585]

Amazing video. You did my day! Excellent job.

[@pardeeplohia5987]

Great video on fortigate thanks sir ❤

[@josephnduati1214]

Thanks for the video

[@robsawyer8034]

Excellent video. Do they still offer a full license trial. I only see one with 1 cpu and 2GB ram. Where can i find this one?

[@IgoroTech-Official]

hi there, for the newer version after that, yes, it's unlimited but limited interface. You can check my other video for it. Thanks kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@robsawyer8034]

@@IgoroTech-Official Thanks a bunch

[@saritaprasad4295]

It is working thanks

[@segunjay4153]

I have followed all the steps but I'm unable to login to the Fortigate environment. I used the password I created and "admin" but it doesn't work. Can you please help me.

[@IgoroTech-Official]

hi there, perhaps you mistype the password. you can try the newer version which has no expiration. kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@mohanasundaram3058]

Lan setting showings 192.168 ip series..why you have to set 10.10..10.1 in port 1

[@2cpr123]

why you has vitual windows11 but you no using with firewall to Example this video oh~

[@IgoroTech-Official]

hi there, yes, you are correct, I can use the Windows 11 VM but it would be a bit slow because my PC is old. It would be more convenient for me to use the host to manage the device. thanks

[@emanuelmonteiro007]

Muito Obrigado pelo vídeo. Muito Obrigado pela partilha...

[@bhimgrg05]

Thank you very much.

[@TheElevenBravo]

Amazing tutorial! Thank you an awful lot.

[@IgoroTech-Official]

Glad it helped!

[@iccanui9053]

very cool. thank you

[@mahdiyarbagheri81]

Bro saved us all

[@Nagaphanindrareddy]

hi this is great video , i just fallow u r steps, i got fortigate page on VM system but i don't get internet access.

[@pamaroid8026]

Excellent tuto very usefull

[@WNasiri]

thanks for the video so apprehensive video

[@def__luisAM95__]

Thank you so much!

[@IgoroTech-Official]

Glad it helped! Cheers!

[@ekramyassin]

Thank you for the videos you are making they are really helpful. I am having trouble getting the ip address though. The port 1 ain't receiving dhcp assigned address. Can you help me please?

[@IgoroTech-Official]

hi, maybe you missed something. i suggest you try the newer version of fortigate VM which is easier to install. kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@pii3765]

I tried to follow the steps but I get destination host unreachable when I try to ping the ip of port 1. How do I fix it?

[@IgoroTech-Official]

hi there, make sure you enabled the ping on that interface and also make sure you already set the VM network as a bridge. You may also check the link on the description to install the latest one, with a download link as well. The latest one is easier to install.

[@abdallahbashari7]

Great content

[@gullitlevia787]

thank you for a great video

[@kianJP]

Hello sir. Please can you provide download for fortigate version 7.2.4 its not show on website. Thanks

[@IgoroTech-Official]

hi Sir, I just checked and yes, they already removed the 7.2.4, I assume it's due to vulnerability issues. from the website, we only have 7.2.6. you can also download 7.2.1 from here: kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@andusefulknowledge]

i followed every step exactly, but when VM booted it was not licensed! how ever i signed in withmy forti account and got lifetime trail license. is it the same? or the licesne you get is different if i follow your way? however i followed and it did not work

[@AbhijitKarmakar-wj4xh]

Thank you sir

[@ddaa-te6rz]

thank you very much

[@arsalshahzaib]

can the ip address be anything? or is it necessary to be like the same network as of your physical one?

[@IgoroTech-Official]

For the LAN interface yes, you can put any IP address you prefer.

[@vigneshkumarv478]

Thank you @IgoroTech

[@saaidahmad-s9d]

hello, thank you for this great video... im having VM is not licensed or license is invalid even when following the exact steps. any help? thank you

[@IgoroTech-Official]

Maybe you missed something. Please try this other version. kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@emmylarry5666]

Thank you for the tutorial - i followed the steps to disable the NTP but still encountered license issues when accessing it through the browser, Please can you assist? Thanks

[@IgoroTech-Official]

hi there, maybe you missed something. I suggest you install the later version which is easier to install: kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@fareedahmedshah]

nice video thanks

[@TheWaashaa]

Thanks for the video! Is there any way to renew the trial license?

[@IgoroTech-Official]

hi there, good question. FortiOS 7.2.1 is released already. it wont expire but different installation method. Stay tuned, with in this week i will create new video and share the file as well.

[@kento6909]

It seems that Fortigate does not provide vm imagies for vm ware fusion mainly used on mac os. Is there any way for users like me to utilize vm images by Fortigate on Macbook air?

[@clintmoutaillier1101]

Thanks a lot @Igoro Tech Official

[@mustaphaelmegder8840]

hello, when i put the physical adress in the browser i have this message : VM is not licensed or license is invalid for current VM configuration. Upload a new license or reconfigure the VM.

[@IgoroTech-Official]

hi there, perhaps you missed something. I suggest you try the later version, easier to install: kzbin.info/www/bejne/mKunhXl3rpKHl8U Download link on the description as well. tqvm

[@jagdeepmehto]

I followed the instructions, but still facing the issue. It still says" VM is not licensed or license is invalid for current VM configuration. Upload a new license or reconfigure the VM." Plz help on this

[@GowravKumar-z7o]

same error

[@mohamedmatouk8284]

@igoro right after installing the image and rebooting i have this message juste before LogIn : Package validation failed , level 1 ,sign status 0 / any suggestions ?

[@IgoroTech-Official]

hi there, perhaps you missed something. I suggest you try the later version, easier to install: kzbin.info/www/bejne/mKunhXl3rpKHl8U Download link on the description as well. tqvm

[@nanaarhin5567]

Can it be installed on Virtual Box? I have it and I have successfully installed some OS in the virtual box

[@parmodsingh9829]

sir vm fortigate login id admin and password space enter not work then my login page show some massage login incorect pls reply me..

[@DenAlcantara]

Hi Sir! Can I use 4 fortigate image of same version to create a topology in eve-ng? or I can only use 1 fortigate?

[@IgoroTech-Official]

hi bro, ito at ung mga old versions pwede, pero ung sa 7.2.1 and above d q pa na try kung pwede multiple accounts. itong mga old versions kasi no need account pero valid for 30 days only.

[@DenAlcantara]

@@IgoroTech-Official Thanks

[@dilupasandika9637]

VM ware pro does not have free trial now. Do you know any other option ?

[@patrickselala5614]

is unfortunate I cant login into forticloud account, it requires token code and I don't''t receive it through my email.

[@mehribankrimova2964]

It's a very good tutorial, however I did everything exactly the way you showed, but it still didn't open on the browser and wanted a license

[@IgoroTech-Official]

hi there, perhaps you missed something, please use the newer version which is 7.2, it would be easier to install and no expiration. kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@parmodsingh9829]

can not login firewall using admin username showing incorrect password

[@vz4798]

Why did you not use NAT for the first network adapter?

[@IgoroTech-Official]

hi there, I prefer to use bridge for me to able to access thru any device on the network.

[@vz4798]

@@IgoroTech-Official thank you

[@vz4798]

@@IgoroTech-Official So technically, could I create a bridged network on a different adapter so that I can access my FortiGate from any device on my network? I set up my FortiGate based off of your previous video explaining this and noticed I could only connect to it from my main PC via the DHCP address on port 1 or from within the Windows 10 VM its sitting on top of connected the my virtual LAN on Port 2. To make things simple, I want to connect to the Gate from my laptop instead of my main PC. Lastly, would I have to give my new bridged interface a set ip and Static route? Sorry for all of the questions. Your help has been super good.

[@ahmaddurrah]

@@vz4798 if I understand your question correctly, you should be able to access Fortigate from your laptop as long as it is in the same network as your main PC because the Fortigate VM has been set as a bridged network. You can access it from your laptop using the WAN IP that was set earlier for your main PC to be able to access the Fortigate.

[@vz4798]

@@ahmaddurrah thank you

[@e1Pr0f3ss0r]

Is it necessary to add 9 more network adapters?

[@IgoroTech-Official]

hi there, it's not necessary, you can only enable the interfaces you need. thanks

[@jagadhriwalapreet2774]

I have done all processes but when am going to login firewall it show me a error VM is not licensed or license is invalid for current VM configuration upload an new licence or reconfigure the VM Please give me a solution 😢

[@pradipkumarsarkar90]

download the 7.0 version..

[@yuvaraj4255]

DHCP not working in port1

[@dineshkomakula3001]

Restart

[@Benmaluco9]

Thx

[@shajiuddin1581]

Nice video , but didn;t got any ip at port 1 dhcp.

[@nhunguyen222]

does the valuation still work in 2024

[@IgoroTech-Official]

hi there, yes, alternatively, you can use the later version which is easier to install. kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@Rjj_Gaming]

Hi, i have try this method any it will work properly for the first time, now i remove older one and install newly downloaded VM Image from other account and trying to install with the same method but it showing Invalid License, can anyone please help me to resolve this issue. Please reply if anyone have the solution of that.

[@karik4455]

same issue

[@khiemhuynhdt]

same issue

[@yevgeni10]

How do i know what is my set ip ??

[@IgoroTech-Official]

hi there, if you're asking about your LAN IP address (gateway) you need to configure it first. it's all in the video, you can start from 13:32, from there, you can see how to configure and how to view the IP addresses. thanks

[@yevgeni10]

@@IgoroTech-Official Yes but how do i know which gateway to give?? is the my main pc gateway ?? or the VM address ??

[@yevgeni10]

I finally installed it but is says my product isn't valid.

[@IgoroTech-Official]

@@yevgeni10 perhaps you missed something. I suggest you try the later version: kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@milestoneformula7979]

Sir my bridge showing IP address 0.0.0.0 and subnet mast 0.0.0.0 please help to resolve this issue

[@az_fezz4397]

Did you find a solution ?

[@karik4455]

cant assign same sunbnet for port2

[@NageshBadavath-sz6pc]

I tried the method 2 to 3 times but I'm not getting Dhcp address so that I'm not able to access FortiGate firewall to my physical computer.

[@IgoroTech-Official]

hi there, perhaps you missed something. I suggest you try the later version, easier to install: kzbin.info/www/bejne/mKunhXl3rpKHl8U Download link on the description as well. tqvm

[@surangajay5510]

How can use this macbook M1 ARM64 version

[@komimawulikpodohouin4543]

i have the same problem

[@ddaa-te6rz]

hi i forget password setting

[@felixlim8124]

why i can't ping port1? i already dhcp and get the ip

[@ascencas7448]

Check filtering

[@ShrineTamnbdh]

License status invalid

[@elvistsaint7918]

I do everything that you say on the video but I still have the invalid licence msg, please can you help me to solve this problème.?

[@IgoroTech-Official]

hi there, maybe you missed something, you can try the higher version, no expiration; kzbin.info/www/bejne/mKunhXl3rpKHl8U

[@daneldanien3888]

what password you typing?

[@IgoroTech-Official]

hi there, by default no password.

[@IgoroTech-Official]

hi there, by default the password is blank (no password) just hit enter.

[@yehiaabdelkhalek-hz7pb]

i need the vm password

[@jeshwanthraj3312]

@IgoroTech-Official my port2 is pinging but my fortinet page is not opening it shows internet information services

[@shortscliphub]

how to give static ip address?

[@Islam.our.religion]

Thx for the video