Thanks so much for making this video. I have made miles of Cat5 cable / connections. Never done fiber - always wanted to learn and this was a great tutorial. Thanks!
@mikezaldarriaga46614 жыл бұрын
I haven’t come across many videos for us techs in the field. Let alone a competent one. You’re awesome man. Thanks for posting this. I’m sharing this with my technicians.
@MercuryBroadbandOhioTech9 ай бұрын
This is all i needed. I dont need every little detail just the cliff notes. I dont need to know how to do it just understand how its done then hire the rest of you to do it!!
@iTheHonestMan2 жыл бұрын
That was really informative. I’m trying to get into this career. Everything seems so interesting to me when it comes to fiber
@danyordonez22332 жыл бұрын
I used to do that, it’s called “splicing” its pretty fucking easy bro.
@danyordonez22332 жыл бұрын
And good money too
@allenfamily85284 жыл бұрын
Thank you Shane. this was very informative. I am switching to a fiber company when I move and I am trying to learn the process for installation and delivery so when i am talking to this company I know what to expect and what should be happening in and out of my home.
@Famousfifty83 жыл бұрын
Can't believe that heater works very well with the lid off of it. Great instructional video for beginners though. They will appreciate this.
@RickyG2253 жыл бұрын
Shayne-Fantastic pres. Thanks for all the detail. Wish I could see it up on the pole. Very informative. Be safe out there bro!
@johnnyrocko29337 ай бұрын
Very interesting to watch all this. We’re getting fiber in our area soon so I’ve been getting some information about it from different sources.
@dmitrykaraulov7039 Жыл бұрын
Did the same in appartment buildings in moscow during covid time. They paid 15 $ from one order, although it usually took 2 hours. I hope I can do it for good money if I move to the States
@florichi2 жыл бұрын
My experience shows that that buffer tube will break in 5-10 years and take the fiber inside with it. When we terminate the fiber I cut the buffer tube right where I cut the outer plastic. I have seen a lot of install where the tube cracked in the curve and resulted in loss of service with temperature cycles before breaking completely and inducing 10-15dB loss.
@ericbannon3374 жыл бұрын
Very interesting. Thanks for taking the time to share.
@batmore13 жыл бұрын
Really great demonstration and explanation. Appreciate it!
@joemc1112 жыл бұрын
Last year I got fiber, they already had a piece maid up with the ends installed. Nice video man. You should have the go por.
@scottnorthey95683 жыл бұрын
I think it's just meant to have a mechanical connector out on the end of the fiber as opposed to a spliced on pigtail. Either way you made it work and it's nice and neat.
@plaguewinds78322 жыл бұрын
a mechanical connector will always have worse attenuation than a spliced in pigtail or a splice on connector.
@florichi2 жыл бұрын
@@plaguewinds7832 And? As if the added 0.3dB made any difference on the loss of the 5km line and the splitters.
@gss89x4 жыл бұрын
Great info...but I wouldn't handle fiber without gloves. Fiber glass strands inside that cable are pretty smooth. But once broken or disturbed they'll penetrate your skin easily.
@Famousfifty83 жыл бұрын
Gloves will not keep fiber out, if anything likely make it more dangerous to allow glass to be embedded in them, or by making the fiber hard to handle. Anyone who works with fiber on a regular basis would know it would be miserable to do this task with gloves. Fabric or nitrile isnt stopping the glass either.
@gss89x3 жыл бұрын
@@Famousfifty8 True..but I prefer to wear them atleast while stripping fiber bsw and handling fiberglass strands.
@florichi2 жыл бұрын
@@gss89x And how do you take one fiber out of the 12 that are in a buffer tube? Or do you only handle single strand cables?
@deepakvvs4 жыл бұрын
Appreciate the effort you put into making this excellent video. On a lighter note you never showed us what you were going to do on the pole, did you fall off or something?
@PWingert1966 Жыл бұрын
If that's corning Fast access fiber that first shave should not be needed. Its designed to peel away easily. tape mark five feet of cable You shave two inches off the end. nip the bottom sheath. Grab the two pieces of sheath and pull them apart and it splits cleanly all the way down as you split and reposition. The tape mark will be your stopper. I would use a Jonard mid span slitter instead of the x-acto knife if I weren't using fast access cable Jonard makes a great set of fiber tools and our company supplies them so we can be as fast as possible. . All our new install use six fibers. It provides redundancy, is great for small MDU's and can support the room being a rooming house with multiple independent tenants such as students. for termination we use terminations that can be spliced on rather then using pigtails. AFL makes them and its another real time saver so we don't have to splice 6 fibers in the pigtails. We usually just splice terminate the one cable and save the rest of the future.
@technicalfacilities52952 жыл бұрын
awesome, great work Shayne !!!
@czarface2 жыл бұрын
At AT&T we no longer use a fusion splicer. We have 3m mechanical crimp on heads that save you the trouble of using a pigtail. Good video though 👍🏽
@florichi2 жыл бұрын
What's the trouble? I am done with a splice in one minute, 2 with getting the splicer out of the box.
@ChrisSahota4 жыл бұрын
Very Interesting Video Shayne. Thank you Sir for this informative knowledge.
@understatements3 жыл бұрын
i am currently living with ADSL, but in October 4th it all ends, my family decided to move to fiber since ADSL at our house is now really bad, after 6 years of suffering with ADSL it all ends
@manny873 Жыл бұрын
What’s bro great video . Do you have a video of what you did on the other side ?
@rb80492 жыл бұрын
Best to directly splice. Forget the butt connector. Mine failed after several years due to too much loss and they just directly spliced. It’s a permanent connection. Don’t need testing point outside. The ONT can measure power and provide that back to the provider. Really too much complexity in these installs. Can simplify running directly into the house. Look at all the work eliminated for each drop.
@Treadvlogs1 Жыл бұрын
So the connector point is in the house?
@anujn11844 жыл бұрын
Appreciate the effort man 👍 Thanks dude
@Vader99ify4 жыл бұрын
This is exactly the way I do the fiber here at Point Broadband in the Ohio market except our NID's have a bulk head and a parking lot for the splice.
@ChrisM-wv4gs6 ай бұрын
Spectrum is installing service on my street and I was told they would be up and running in a few months, will the install the box that goes the outside of the house during initial consultation or only after I order service !
@attribute-46772 жыл бұрын
Thanks man!! I loved the video
@riveryih63702 жыл бұрын
It's a very useful Fiber Optic field installation video, It was reached us the fiber cable how to deploy on premises. The non-metallic Flat Drop cable was used in 2019, could I know that is in which county?
@shaynearmstrong92902 жыл бұрын
US
@MRSketch092 жыл бұрын
Thanks for doing the vid. Very interesting stuff. You didn't talk about it, but I noticed how you tried to keep all your loops really, gradual, instead of doing "Tight" loops, I'm guessing that important when it comes to fiber?
@florichi2 жыл бұрын
Too tight results in attenuation. A tight curce results in the loss of the total reflection within the fiber. It's like if you try to drive your car around a 90° bend at 100mph. But current fibers are already really good with tight bends. A loop with 2-3 diameter is usually not a problem. But if you have the space you make the loop as big as possible.
@MRSketch092 жыл бұрын
@@florichi Thanks for heads up.
@nalamkhan3 жыл бұрын
Nice video, very informative. Would be great if you just put the fiber pieces in a safe container after cutting it.. great work anyways..
@imowgrass3 жыл бұрын
Thanks for the video! Very informative :D
@lewisfranks54183 жыл бұрын
Awesome video!!!! thank you so much
@3dk13 жыл бұрын
Excellent video
@iangregoryhome2 жыл бұрын
I would use double sided tape in the middle to hold the splice protector and velcro not cable ties.
@allansheldrake48322 жыл бұрын
have you not hear of a tool called the wire stripper for fibre
@manny873 Жыл бұрын
Did you fusion splice the other side ?
@JEByrd4 жыл бұрын
Thanks! Very informative.
@btmusic69963 жыл бұрын
Excellent job sir
@Saywhatohno2 жыл бұрын
what is that gay box called and where to you get it from? Also what are those 2 machines called? I am confused, where is the 900 micron wire coming from and where is the 250L coming from?
@afrojojo9475 Жыл бұрын
Yes, the box does look very gay.
@zainubanderson540210 ай бұрын
@@afrojojo9475😂
@Majidiof3 жыл бұрын
Thank you for this video
@JerdGuillaumeSam2 жыл бұрын
Over here we use those (splice boxes) when the cable line is too short to reach the home
@---GOD---4 жыл бұрын
How does it work if the flat black cable runs directly inside the house? I have that flat black fibre cable running to my basement, unterminated for now as I don't have an active fiber connection yet.
@briceperdue75873 жыл бұрын
I came for the fiber video I stayed for the hat
@kjm893 жыл бұрын
The fiber goes into the home, and connects directly to a modem/router that accepts a fiber connection? I had an installer come out who wanted to connect the fiber to my coax... I'd rather have the ONT do fiber back out directly into my home, to a modem router. Even over ethernet.
@florichi2 жыл бұрын
Either you plug it into the modem with a LC or SC connector or the ISP wants to have a converter to Ethernet. And one company in my area converts to Coax as well, since their main business still is Cable. I don't know why they just don't get other Routers for their customers, but they still convert to Coax.
@jeffreycollins48933 жыл бұрын
Jonard makes a flat drop splitter for this type of application
@Famousfifty83 жыл бұрын
Life saver. The blades dont last very long, but still a great tool to have for oval drop cable.
@jeffreycollins48933 жыл бұрын
@@Famousfifty8 Totally agree the longevity of the blades is terrible, but it’ll save you some time
@scoot17763 жыл бұрын
awesome, thanks!!
@habibullah24614 жыл бұрын
Good Job..
@elazharytoufik77463 жыл бұрын
Any informations bout ur company .im a technecian of fiber optic looking for a job
@Bacharus4 жыл бұрын
Good job. Where are you from ?
@shaynearmstrong92904 жыл бұрын
This was made in Owensboro, Kentucky
@Bacharus4 жыл бұрын
@@shaynearmstrong9290 Do you work as a cable man? Do you know interesting channels in this profession on youtube?
@shaynearmstrong92904 жыл бұрын
@@Bacharus I don't know of any other channels, I just created this video to train our new technicians.
@Bacharus4 жыл бұрын
@@shaynearmstrong9290 I got it. Good luck in job!
@georgeshepherd7507 Жыл бұрын
Very informative I like this video but just one thing I noticed you did and it's you not disposing your fiber fragments safely......you should have a bottle to dispose the fiber fragments...
@Tharudarksideoffical Жыл бұрын
Hello sir how we applied for this work i am from nepal my expression is 6years old
@sabatrol818210 ай бұрын
Definition of perfect 10/10 = 00.00
@ketas2 жыл бұрын
i can't believe you need to use knife instead of jacket stripping tool if you do it professionally?
@Mobile-zw1dm Жыл бұрын
Need more videos
@Airbear504 жыл бұрын
Will like to see how do you prep the fiber on th epole area/
@Famousfifty83 жыл бұрын
Typically aerial applications are as simple as plugging a pre-connectorized drop into a tap port of some sort.
@Treadvlogs1 Жыл бұрын
The splicing, if any would be done on the ground in most cases
@smartassist97002 жыл бұрын
What is cost of fiber v/s CAT6 a?
@shaynearmstrong92902 жыл бұрын
Depends on how and what you terminate the ends with. You will need to convert the ends of fiber to ethernet. The only time I to use fiber in place of ethernet is if I have a run that's over 350'. Usually cat6 is cheaper. With our own equipment to terminate (Our average cost per cat 6 drop is $16) (average fiber drop can vary between $40- $600+ depending on converter and application) On a side note I've ran tests for real-world scenarios and can't find much difference between cat 5, 6, or 7 for the average user. We run Gig speeds all the time on CAT5 riser. Just don't tie any knots in it. We mainly use cat 6 + for long runs and Poe, and security related equipment.
@florichi2 жыл бұрын
Just the cable it's nearly the same. Some 4 strand fiber cable that are blown in microducts is even cheaper than Cat Cable.
@gurzil66824 жыл бұрын
Do u still working there with DSL coz most of places where I live we still work with DSL and I search for work in a company outside the country I will appreciate if someone give me some information
@shaynearmstrong92904 жыл бұрын
I'm not 100% sure what your asking. At&t still has DSL in rural areas. But there branching their fiber network out. The video was installing fiber for an electric municipal.
@gurzil66824 жыл бұрын
Shayne Armstrong I have a diploma in fixing DSL and I’m wondering if i can get a work outside the country (algeria) Like can a company accept a worker have a diploma from another country ??
@shaynearmstrong92904 жыл бұрын
@@gurzil6682 We do fiber contract work. You would probably be better off trying to get hired on at At&t or Google. Most of the contractors we hire have other forms of income.
@williamolson1938 Жыл бұрын
@@shaynearmstrong9290😊
@fiber-szn_-30644 жыл бұрын
My internet company has been telling me for a year I can’t get fiber optic internet but on a pole next to my house I see a fiber optic service terminal I was hoping I could somehow send pictures and see if u can figure it out for me
@shaynearmstrong92904 жыл бұрын
I hate it for you. I'm in the same boat at my house. The fiber running next to my house is for government use only. Usually the systems we work on, municipals buy certain fibers and run their system off of that. Depending on what kind of system it is you probably won't be able to just plug it up and it work it'll have to be plugged in on the other end and you would have to have the right ONT + software to communicate with it.
@paulmurdock4 жыл бұрын
Hi Shayne, who makes that small demarc box you used in the video?
@shaynearmstrong92904 жыл бұрын
I believe it's a primex encloser. I haven't seen it in a while.
@paulmurdock4 жыл бұрын
@@shaynearmstrong9290 Did you guys find a better one that you're using? I'm doing a small FTTH deployment here in Utah, and I'm trying to find some good cost effective demarc boxes.. I was using some Commscope OWB boxes but they essentially doubled in price over the last few months.. :(
@shaynearmstrong92904 жыл бұрын
@@paulmurdock We're still using the same in the video. That's the one we use in one of our (Not my choice). You could check with www.powertecsolutions.net/ Their from Franklin KY they seem to help allot of people out, and if they can't, they'll point you in a good direction. My main point of contact is Drew Harding
@fibercablesolution4 жыл бұрын
Hi Paul, did you found out situable box?
@Vader99ify4 жыл бұрын
@@paulmurdock Try looking at Calix enclosure and Primex makes a bigger one than what you see here in this video.
@EpicXProtocol3 жыл бұрын
Dude, clean your fibre after you’ve cleaved it 🤣
@Famousfifty83 жыл бұрын
You do not clean fiber after cleaving it, you clean fiber before you cleave it. Fiber end should not be touched after being cleaved.
@plaguewinds78322 жыл бұрын
the fusion splicer will also give it an arc clean before it does the final splice. you do not touch the fiber once cleaved.
@florichi2 жыл бұрын
And then you have a broken tip again.
@Todd.T Жыл бұрын
And push all the contaminants to the end. You should tell him not to blow into the cleaver instead...
@mohamedbasharyahya892 жыл бұрын
I cut it by mistake to one customer 😑
@dudlus27574 жыл бұрын
working with fiber in the cold is a bitch.
@ketas2 жыл бұрын
funny how it was so cold that fiber could break and he wore a hat but had bare neck?