As someone with zero experience with woodwork who's trying to make a box from scratch this video was just what I needed. Too many seem to think you have a whole woodwork shop at your disposal. Cheers
@LTWCarpentry3 жыл бұрын
No problem at all, that’s primarily why I made it, glad I could help !
@samalons Жыл бұрын
Totally agree, more of a show off than tutorial 😂
@pomademahal3 жыл бұрын
Finally someone showing the way within my available budget and tools.
@LTWCarpentry3 жыл бұрын
Glad I could help buddy, if you want any help with anything else please feel free to ask, I’ll be happy to make a video to help you.
@RikuSpirit25 күн бұрын
Thank you for this video. It was also relaxing to watch.
@LTWCarpentry24 күн бұрын
Thank you very much 🍻
@DrunkenBuddhaFist8 күн бұрын
I've been looking for a vid like this for a few days now as I need to do exactly this, but with the kind of tools most people have around the house. Ta very much.
@LTWCarpentry4 күн бұрын
You are very welcome buddy and I really appreciate the comment! 🍻👍
@Sikhipacksweekly12 күн бұрын
Roast dinner thanks for sharing this DIY basics. You're a gem!
@LTWCarpentry12 күн бұрын
Thank you very much buddy 🍻
@alycewich44722 жыл бұрын
Love it, a video with the basic hand tools that almost anyone has. I love watching woodworking videos, but the amount of very specific tools precludes me from doing them. Subscribed and will watch all of your previous ones! Thank you. (And the bloopers made me laugh out loud!)
@LTWCarpentry2 жыл бұрын
Thanks for you comment mate ! I really appreciate that ! My aim is to try and do videos for people at all ends of the spectrum ! If there is anything you would like me to do a video on please feel free to ask mate ! Thanks for the sub and I hope to keep you entertained !
@TheWardagh3 жыл бұрын
Great stuff and well explained, spent most of today arguing with hinges 😬
@LTWCarpentry3 жыл бұрын
Thank you for your comment !! If you need any help please feel free to ask away !
@rossco2893 жыл бұрын
Me a boilermaker making a centre console for my van, have to get it correct for good fit up. Thanks for the video
@LTWCarpentry3 жыл бұрын
More then welcome ! If you need any help or advice please feel free to get in touch !
@thecaretaker10004 жыл бұрын
Nice tip scoring with the knife great video
@Aaron_Barrett Жыл бұрын
Thank you for video! Greetings from Ukraine!
@LTWCarpentry Жыл бұрын
Thank you very much !
@eyloa63867 ай бұрын
Love the bloopers 😂🫶❤️
@LTWCarpentry7 ай бұрын
Cheers mate 😂
@votesudanusa2 жыл бұрын
BINGO!!! I am just trying to build a box... NOT a house. Simple and Easy to follow
@LTWCarpentry2 жыл бұрын
Cheers buddy ! I’ve also done one on how to install hinges with a router that may help also.
@4baldboy3 жыл бұрын
Fabulous instruction!
@LTWCarpentry3 жыл бұрын
Thank you very much !
@ElohiSilverEarthVentures4 ай бұрын
Yep and that little tip right there about placement of your hand..lol, tho not so funny it's just something I do a lot, my hands are covered in scars and wounds from dumb little mistakes like that, you'd think one would learn theyre lesson, I guess not me.
@bluetech28093 жыл бұрын
just wondering what you are using to hold the wood in place. Surely if you don't hold it somehow it would just move when you try to chisel it.
@LTWCarpentry3 жыл бұрын
Hi buddy just I used double sided tape to hold it for the purpose of the video, generally it would be on something larger and wouldn’t need fixing in place, just didn’t want it sliding around for the video. Thanks for you comment.
@YourAflacGal Жыл бұрын
Great teacher!
@LTWCarpentry Жыл бұрын
Thank you very much 👍🏻
@crouchvalewoodcraft4 жыл бұрын
Nice one mate 👍
@LTWCarpentry4 жыл бұрын
Cheers buddy !
@jamieeallard1134 жыл бұрын
The blooper 😂😂😂😂😂😂 xxxx
@LTWCarpentry4 жыл бұрын
Great ain’t it 😂😂 xxxx
@victorest95373 жыл бұрын
There's 23 Aholes that dislike this vid thanks for the details love the vid saved me a few bucks and for the knowledge brotha 👌
@LTWCarpentry3 жыл бұрын
Thank for the comment buddy ! Glad I could help you out ! Can’t keep everyone happy mate, as long as I’m helping more then getting disliked I’m happy ! You need any help with anything else let me know dude ! 🤘
@georgiana65985 ай бұрын
Thank you for this very simple and informative video. A question, please. Would I get away with chiselling out the mortise to attach a front to a rabbit hutch long wise metal grilled with a wooden surround opening panel? Its sturdy pine, an older one kept dry indoors? Many thanks
@georgiana65985 ай бұрын
Sorry I meant will I need to put a mortise in with the chisel for a hutch front attachment from the one side edge with two way hinges, as you are using or can I skip this process? It's not heavy and I will be installing 2 hinges at the one side so the hutch front swings open and closed on the left hand side? Thank you
@rhysallen79724 жыл бұрын
Nice video👍 quick question, why didn't you pre cut the long edge of the hinge with the chisel as you did the two ends?
@LTWCarpentry4 жыл бұрын
I did mate, maybe I did it a little to quickly and didn’t emphasise on it enough, thanks for the support
@LEROUX19638 ай бұрын
MERCI.
@khaleemarielle24 Жыл бұрын
thank you :)
@LTWCarpentry Жыл бұрын
Your welcome 👍🏻
@cjb128 Жыл бұрын
I just repainted a small jelly cabinet. Never have done this before. So .... I'm wondering about the hinges which I removed before painting. Open a hinge one way and both sides will lie flat, open the other way and the sides will sit at right angles. Does it matter which way the hinge faces? Or is it a choice?
@LTWCarpentry Жыл бұрын
I’m terrible sorry but I’m not sure I understand what you mean?
@Aaron_Barrett Жыл бұрын
Instal them flat when door closed
@ajaygodase3 жыл бұрын
Can we install them without any gap between wood pieces?
@LTWCarpentry3 жыл бұрын
You can indeed, all you need to do is chop the leaves in slightly deeper
@ajaygodase3 жыл бұрын
@@LTWCarpentry thaks a lot buddy... Will surely try it
@LTWCarpentry3 жыл бұрын
Let me know how you get on… any probs feel free to get back in touch.
@ajaygodase3 жыл бұрын
@@LTWCarpentry thank you... Means a lot ☺️
@johnhe-yump29383 жыл бұрын
Any tips on getting my screws flush? Mine always seem to end up at a slight angle or is it just a case of practicing.
@LTWCarpentry3 жыл бұрын
In a nut shell yes, practice practice practice, although saying that you can buy things called centre drill bits sets that will help no end with this. I have added a link to a set in the description of this video for you if you wish to buy some. These really helped me when I first started! Hope that helps.
@johnhe-yump29383 жыл бұрын
@@LTWCarpentry cheers, I'll have a look if I'm still struggling. Once again great video, informative for a beginner without being patronising. Good stuff
@LTWCarpentry3 жыл бұрын
@@johnhe-yump2938 not at all mate, thanks for your comment and the subscribe ! Cheers dude !
@murielelalouf60785 ай бұрын
Bonjour cest normal qu'il y a un écart entre les 2 planches? Merci
@raulgutierrez59203 жыл бұрын
Los toltecas!!😂😂😂👍 👍
@HelloWorld-ti2zp2 жыл бұрын
I have no intrest in putting on a hinge on anything, its 3 am. Why am i here? Good vid tho
@LTWCarpentry2 жыл бұрын
Well all I can say is thank you for your comment and thank you for watching my video !
@lindafryer45153 жыл бұрын
I have a ? I installed my henges on a aluminum screen door.but my door only want to open halfway.i make it open the rest of the way. What do I need to do. Or undue please
@LTWCarpentry3 жыл бұрын
Without seeing the hinges I would only be guess, may I suggest following my Instagram @ltwcarpentry and sending me some images in there so I can help you ? Thanks for your comment.
@lindafryer45153 жыл бұрын
@@LTWCarpentry I can't send pic @LTW Carpentry
@OK-sk2bw Жыл бұрын
6:42
@MrKockabilly3 жыл бұрын
6:40 There's a wide gap between the wood planks whether in open or in closed position. I don't think this is the proper way to do it, unless of course it's how you wanted it.
@LTWCarpentry3 жыл бұрын
Thanks for the comment, this is in fact how you would want this to look, if you have a look around a closed you should see (if installed correctly) a nice 2/3mm gap all the way round it.