How to install Honda Civic coilovers (Turbo Civic)

Thank you for watching. If you would like to support the channel you can pick up merchandise at 79thproduction...
Disclaimer- I am not a mechanic by trade. If you decide to try to put coilovers on your own vehicle, do so at your own risk. There are certain procedures that where not shown in this video that you will need to do on your vehicle.
use coupon code 79th for a discount on purchases from maxpeedingrods
www.maxpeeding...

[@Cee_Four]

Good to see you back Justin, hope all is well with you. Nice to see that Maxpedingrod is still supporting the channel as well. Stay Safe Brother and Stay Blessed…

[@taraishot100]

I have a 2000 honda civic Gli does anyone know what coilovers will fit? I’ve searched everywhere but my Honda is hard to find parts for

[@keed_on_two_wheelz]

Quality channel that shows what building a budget car is actually like. Other channels "alright guys were building a budget civic." 4 episodes later. "Alright so we got our turbonetics 60mm with a full custom built manifold"

[@wargaath3536]

Stg, they be doin shi like that all the time😭

[@jonathangabriel6336]

Great tutorial. For those newbies. You dont HAVE to undo the outer tie rod OR the upper control arm. The reason he’s doing it this way is because he did not loosen the strut fork mount. If you can loosen the fork mount before loosening anything else, you can avoid doing all of this extra disassembly because then the strut and fork will split into 2 parts and you will have plenty of space to remove just those 2 components while leaving everything else intact. The second you undo your tie rod or control arm, you HAVE to redo the alignment afterward. If you leave it all alone, you dont have to realign. The more you know..

[@tonyjusto914]

To save time I've been able to just unbolt the fork on bottom and take the 14 off the fork attached to strut knock fork off strut and unbolt top of strut comes out cleanly without having to take off upper ball joint or tie rod

[@Siknan80]

Nice what about on an Accord

[@LifeofAK777]

I've done my cars this way too, I haven't had any issues even with stock suspension going in or out by just doing the fork and top bolts.. just gotta pull it out at a good angle

[@tonyjusto914]

@@Siknan80 it's been a while but if it has a fork like the civics should be the same deal

[@TheAssclown213]

Any man whos got a Mario headliner gets my attention. Subscribed.

[@chrisrehkop7797]

Glad to see you back on brother. Maxspeeding rods definitely stepping their game up. Ride height on the Civic looks amazing. Keep up the great work and providing great enjoyable content.

[@EdwinRucci]

Im about to tell my mechanic to take a hike! I learned a lot with your videos!

[@diego6236]

Nice too see u back

[@efactor1984]

Watching your Civic Builds on a Budget and the other Red One recently has been very inspiring to watch. I hope you keep it going. I love both builds you put together.

[@expertpurpp]

Just bought a shirt 🔥 Can’t wait for more designs 💯

[@5.0Ty]

One of my favorite channels just bought a shirt and decal to support keep up the good work man

[@aussieautospeedaas275]

Good to see you back. Please please please get onto the Mustang build 🙏

[@bromoenook356]

Really good to see I back

[@802Garage]

I love the blue black combo. Glad they are improving their product. I need them for a Subaru! You def need some inner and outer tie rods. Good work as always!

[@brosa8117]

Wow it’s been 3 years since you’ve had the civic. Time flies great to see you’re doing well man

[@latenightkauai]

One thing I like about this channel is how long you don’t post, not in a bad way because I feel like it shows that you have a actual life besides doing yt even tho you have 300k subs which is a lot, and it seems like you still do this for fun and not for the fame or money. I’ve watched you for so long Justin ever since the Miata build, I appreciate you and your content man seriously you deserve better!

[@Incaensio]

Dude those coilovers are super nice. They are definitely stepping it up

[@gonzalomiguel9886]

This video helped me a lot, made me realize the full function of coils and controls arms while I putted on my truharts. Now I have camber arms otw. I appreciate the the straight forward instructions. Reminds me of my father back in the day.

[@mamad021nobar]

I'm so happy to see you again,we all missed you bro🤝🏼🔥

[@GLENN_3310]

nice to see you again in youtube

[@alexandercrowell5111]

Puro amor from Neo Mexico to you and yours. Happiest of Holidays

[@yungpranksta2505]

Honestly the best person to watch for car related things

[@jmizzle24]

Glad to see you still have the Blue Beast!

[@mackgambler8891]

Saludos desde San Luis Potosí mx 🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽🇯🇵🇯🇵Jdm for life..

[@pauldadzie6991]

Finally!!!! You are posting again. You have been missed.

[@adrianrock1287]

Glad to see you post again

[@kittonium7743]

good shit man, im getting my first car soon and without someone to get me around cars its been tough, but you guys help a lot! Keep up the great informative content!

[@poodown82]

Wwwayyyy your back buddy .good to see you pop up pal 👍👍👍👍👍

[@sbeezy562]

Ayyy our boy justin is back!!! We all miss you man!!!

[@codykerns9051]

Really appreciate the time your taking to show us everything man, quality video right here! How can I get a hook up on those coil over's? My del sol need's some new shoes ='D

[@ianzalewsky3051]

They like $250 bruh

[@Dreillett]

The return of the king with another great vid!

[@davidgomez9674]

Thanks for the taking the time to show the install! Ima give this a shot on my civic next weekend.

[@lonemountain3049]

noti gang here, glad you uploaded bro

[@johndiaz1469]

You don't have to remove the upper control arm , nor the tie rods; just remove the fork, and the shock will come out easily. Save time and avoid the possibility of damaging the tie rods or the upper control arm. Overall, great content, my friend.

[@Jeremy_Hill_2020]

I finally got my coilovers installed today on my '96 corolla huge ass difference lol the brand is Mostplus by the way I'll probably make a video on it

[@ericgrayjr8457]

Thank you Mann because of your videos I fell back in love with my 98 EX. Much respect.

[@MustangGuy2000]

Thank you. Been looking for this video for 4 years now ! 👍

[@dalving6189]

Glad to see you again brother! Look forward to the upcoming videos/projects! Much love from Colorado Brother!

[@edmundkare5562]

Don't forget to put cotter pins on the tie rod and upper control arm

[@cornevanrooyen4717]

Good to see you man

[@MrCanofear]

Thanks for the great channel, can't wait to see the Eclipse!

[@e92slate]

They look super good! I love watching your videos bro, you show and explain all the work your doing. Keep up the good work and amazing videos!

[@godsonfreeman3782]

I love this honda civic 6th Gen 🔥🔥🔥

[@Y56ladd]

Very good channel but to save urself the hassle on taken out the camber arm nut and the outer rod jus take off the bottom fork bolt the small bolt on the top of the fork at the bak comes out way easier 👍🏻

[@graemehodgson8580]

Yooooo hes back! shot bro!

[@maximo831]

Great video just what I needed to see since im going to be installing coilovers for my first time

[@mrd9720]

Those are sweet.

[@rudypantz5482]

Thanks for the help. Now I know how to install shocks!

[@juannunez3057]

Im a little late but about time you upload again man,happy new years!!!!!

[@TmacMac-pv5jf]

Way better ride!!!! Great video

[@joeyetters9954]

Good to see you brother

[@eaglestoneworks9572]

That inner tie rod looking sus bro lol...love your channel

[@calleolsen9359]

Happy new year 🥳

[@nightshift3123]

Sweet I been waiting for you to drop a new vid. God bless

[@oscardelgado7397]

Good to see U. Brot nice video Keep It Coming

[@dreamsatnight0919]

Really good video, my Civic needs upgrade in near future ty!

[@rohittaurus911]

Happy New Year Man,

[@jasonhughes5346]

Happy new year and God bless

[@prayerwarriorintraining2023]

thanks you brother. may the lord jesus be your shield of protection amen. love the hussle lessssgooo!

[@ericg1149]

Nice, keep the videos coming. I just got my energy suspension bushings in so I'm looking forward to that video!

[@javierpimentel8036]

You need to do a rear integra brake conversion

[@cavanblack]

Always loved this channel! Excited for more!

[@LoniVlogZ]

Nice work as always

[@DrivenFilmsPhotography]

Coils look sweet bro, be glad when they make em for accords. PS, i never knew you install you coilovers like that. I just remove the lower fork to remove the coil. that way it comes out without taking the top control arm bolt out

[@speedismomy2340]

Super helpful videos thanks a lot

[@mrjedistud]

Yes. Mustang update please.

[@jayrodz3122]

What is up Justin welcome back to the TuBe 👍

[@aaronfraser2347]

My favorite KZbinr by far, happy new year Justin I hope you and your family had a great holiday

[@lucioalonso4547]

Nice video. Noticed that besides the tie rod needs replacement so does your LCA bushing where the fork bolts up to!

[@kennethcooper1846]

Them tie rods gotta get changed asap lol

[@DanielGonzalez-bk2hd]

That's what's up man. I hit up Maxpedingrod about you lol

[@jross68052]

Glad I just subscribed. This channel is great. Justin is doing a great job.

[@gonzalomiguel9886]

Tb, I still want to do that paint job on my EG 🥵, y thank you so much I’m about to put Truharts on my civic as well.

[@Mulongski09]

and that my friend is how you rip all your bushings

[@gb361TX]

Bro you need upper and lower ball joints and inner and outer tie rods!

[@modehfy1352]

yes sir

[@Jason-nk4yr]

If you just take the three bolts, out that hold the fork first and remove it on the car. Then remove top 2 strut bolts, strut assembly will come out with ease.

[@kingjay3301]

This shirts are fireeeee I’ll forsure be getting some things

[@bbpolltergiest]

Ayo that Amazon driver left with the door open Those packages gonna fly out

[@4thhokagegaming521]

Love the videos🙏🏽

[@Jeremiah_ej1]

love to see the car at klean meet. Not trying to plug but If I end up going then ill be at a booth for nightxcruise

[@notbanksy8294]

Did you start rollin right as the coils got dropped off?? Amazon dipped at the beginning lol. Those new maxxyPs, look nice tho. Mine are getting tired after almost 3yrs lol.

[@nayborhood.p]

God Bless yal i love yall videos man 🙏🏾💙

[@manuellopezej1]

Need to change out tie rods and ball joints so the ride can be even better... Upgrade the rear lower control arms

[@tricenguapo8047]

More of civic content plsss

[@XayMynx]

Literally used to be that Amazon guy that would drive with the sliding door open

[@carsonbaker8531]

What’s up with the mustang? I was lookin forward to what you would do with it.

[@dnice1677]

I want to make my D 16 Y8 Single cam VTEC turbo

[@jayeewayee3854]

Looks amazing bro, great video!

[@josemacias7141]

Post more i realy like ur videos

[@staticblanco3950]

Justin bruh I know you gotta have 5x tshirts how would we look wearing an xl bruh 🤣🤣🤣bless up fam

[@rafaellizaola3501]

Cool video BUT... what's up with that Mustang man? Been waiting on that for ever sir ...

[@ManuelGutierrez-be1ci]

You did more work than was actually needed to do the job. All you had to do was remove the fork bolts first and then remove the upper coilover nuts and everything would have dropped down without struggling so much.

[@cre8tivegarage157]

notification squad

[@layzy24]

Difference between springs and coilovers?

[@JudahLenz2]

God bless

[@OfficialKeciYT]

NOTIFICATION GANGG

[@matthewsfishtanks]

We need mustang content

[@adamblue7441]

Hey Justin did you ever fix the hail damage on your blue civic

[@wavyhonda5836]

how did you do headliner inside mine falling aparttt but love your car man keep it up 👍