In today's video, we install a set of Maxpeedingrods coilovers on my friend, Dustin's 1998 B16A swapped EK Civic. 15% off code: CRXSETH www.maxpeedingrods.com/produc...
Пікірлер: 168
@AWD_T3 жыл бұрын
Nice to see clean Honda’s that aren’t riced out.
@johnvela69293 жыл бұрын
Doesnt matter what my man seth works on... Hes a very talented individual and i feel i learn so much more when he speaks about the honda chassis.... Keep it coming seth.... Were all behind you and your builds...
@gordoneversley68813 жыл бұрын
I like the change in pace with this suspension install!
@eliyenko35223 жыл бұрын
Respect one of the few videos that actaully break everything down and make it that much more easier to do
@bushidokori3 жыл бұрын
Finally someone shows how to put on coil overs and adjust them while on the vehicle. Finally
@lloydrobinsoniii Жыл бұрын
One of the best videos on how to install coilovers! You show every step and edit the video perfectly! Too often videos leave out essential steps or have poorly shot angles. Seriously, thank you! You’re saving me about $500-700 since I’m confident I can do this myself, thanks to your video. One of my favorite things is that you show every wheel and every coilover, instead of just saying “now repeat the steps,” because sometimes issues happen like with those rear bolts. Rarely do people show when issues come up and how to solve them. Everything about this DIY installation guide is amazing! Please continue to make videos like this! Liking and subscribing with notifications on is a no brainer.
@crxseth Жыл бұрын
Thanks for the feedback and kind words!
@MidnightRamenGuy3 жыл бұрын
I just got me a set for my mk7 golf this video gave me faith cause sooo many video hating on the Maxpeedingrods I just want the dropped look so Thanks again 🙏
@mistrbentkarma15923 жыл бұрын
I can’t wait to pick up my crx Seth!! I have had suspension for one for 15 years and now I’m confident I can do it now thanks to you!!!
@crxseth3 жыл бұрын
Good luck!
@enriquegrimaldo9463 жыл бұрын
Am i the only one who thinks you deserve more subs and views! Great work!
@hilyfe56903 жыл бұрын
Just installed mine! Same coilovers and subframe with lower control arms for my 2000 Honda Civic EX . Had some trouble found ur video and now it’s dropped perfectly how I like it 👌
@instillthefear2 жыл бұрын
9 months later, still good? Thinking of getting these for my 2000 EX as well.
@hilyfe56902 жыл бұрын
@@instillthefear yessir still good !
@giovanniavila49852 жыл бұрын
What brand subframe is it?
@gohardorgohome76873 жыл бұрын
Nice clean EK love the new coilovers and the control arms job well done 👌👊 We need more CRX content
@crxseth3 жыл бұрын
More to come!
@randyej2pr3 жыл бұрын
Im telling you these are the BEST budget build coilovers. I had ksport and these ride way smoother and have lasted me for like 1 year and a few months so far no issues. Fully recommend these.
@GlitchesAndNe3 ай бұрын
hey any issues 2 years later? debating on these or just going with godspeed/teins
@wopino3 жыл бұрын
Hell yea looks dope af, perfect ride height 🔥👏🙌
@KeepinItReal8902 жыл бұрын
first video of yours I've ever watched. had me sold the first 45 seconds. subbed bro. ur killing the clean game
@crxseth2 жыл бұрын
Thanks for joining!
@michaelsnightsuri56322 жыл бұрын
This channel needs more subs and views.. KZbin please recommend this channel more.
@1viiyy2 ай бұрын
great video best tutorial on this brand so far
@ronniecason98073 жыл бұрын
ive got a set of these coilovers for my 90 crx i cant wait to get them installed
@johnnelwhite3 жыл бұрын
Im glad i kept the bolts off the rear of my old dc2. I plan on putting my itr coilovers and rear control arms on my eg sedan this summer. I know they are going to snap.
@AlldayAndrew21 Жыл бұрын
Damn man, those CRX's are so effin clean!!!
@armandocarillo57153 жыл бұрын
I wish i had a friend like you man 🥇
@lowbvll8969 Жыл бұрын
Great taste in cars and music 🔥
@jaievang86723 жыл бұрын
Make sure the top center bolt is tighten. Mine came in loose and caused the preload issue. Keep up the great work
@crxseth3 жыл бұрын
I’ll let Dustin know!
@phillipmitchell40583 жыл бұрын
These hondas are looking good I'm going to get me 95 or 96 not sure yet but love the work 👍🏽👍🏽😎
@dodgersfnshepard8673 Жыл бұрын
Nice work, wish I had friends like you!
@DEATHVALLEY_9153 жыл бұрын
Nice civic mines a ej8 red thought and has a b20V swap with also the same coilovers good work Seth you the man💯
@crxseth3 жыл бұрын
Appreciate it!
@jaievang86723 жыл бұрын
Those bolts probably cost close to what the coilovers price...not hating 🤪 I have MaxPeeding on all my rides right now..they work good. Balling on a budget. Much respect to what you're doing.
@greenbackmafia_8655 Жыл бұрын
I just got mine on my 06 civic today very easy install little tricky on how to get the preset set up in the front to make it low af and still ride smooth but we got it and same on back but it’s ticking rim in front and almost in back and it’s smoothest ride I ever had on a slammed car 😊
@greenbackmafia_8655 Жыл бұрын
Old tucking is the word that is ticking just so you know bro
@cheuknamchan20642 жыл бұрын
我來自香港睇晒你所有片,好正呀
@hellswindstaff912 жыл бұрын
Was about to install these coilovers on my integra today really quickly until i seen you guys struggle with those rear control arm bolts. i said nah my bad luck that will be me and a car stuck on jackstands in the cold. Ill order some new control arms and bolts then tackle it Friday lol. great video!! suscribed
@crxseth2 жыл бұрын
One thing that also helps is the following tool! It is a serious life saver! Expensive, but worth it. amzn.to/3H8DcHW
@hellswindstaff912 жыл бұрын
@@crxseth Nice! ive heard of these. will buy
@soundboydesign13733 жыл бұрын
Good work Seth...
@jonathanrivera3443 жыл бұрын
Lots of fun great vid
@d.r.8073 жыл бұрын
First! Nice to see an EK on the channel. Great memories with that chassis.
@crxseth3 жыл бұрын
Maybe one day I’ll actually buy one.
@d.r.8073 жыл бұрын
@@crxseth that would be a great addition 👍
@tomhanson3293 жыл бұрын
I just got the same ones. I need to tune them but pretty good for the price
@etardadventures90303 жыл бұрын
Mine are way to soft
@jeffreyfast45593 жыл бұрын
Great info, thanks!
@brianbarrett57893 жыл бұрын
This was a great video
@charlesdemeary3 жыл бұрын
Lol I’m glad you make it look easy, gives me some hope
@crxseth3 жыл бұрын
Don’t get me wrong. This job was not easy.
@charlesdemeary3 жыл бұрын
@@crxseth 😂😂😂 could’ve fooled me dude thank god for editing tho right?
@timwilliams47393 жыл бұрын
This job takes on a different persona when those bolts broke off. Ask me how I know.
@charlesdemeary3 жыл бұрын
@@timwilliams4739 😂😂😂 yeahhhhh, I’ve had rear suspension for a few months now that I’m not excited about putting in. Seth gave me more anxiety
@goldfishninja80863 жыл бұрын
Your friend is JDM af now.
@gordoneversley68813 жыл бұрын
Also we did see 2 boxes of the coil overs, is the other one for the CRX!
@crxseth3 жыл бұрын
I believe I will be using the other one for my budget EG sedan.
@timwilliams47393 жыл бұрын
I was screaming at the screen "DONT GET THE BREAKER BAR!!!!!" ......... SNAP!
@crxseth3 жыл бұрын
Had to do something! Haha. At least when it breaks, we know we have to cut it out.
@anttrig6082 Жыл бұрын
That happened to mine today bro now I know what I’m have to do shit sucked tbh lol I was damn it ! Your great on showing what you do much appreciative keep up the amazing work bro
@lna82503 жыл бұрын
Your work is clean and neat. Really appreciate it I am planning to get a set of coilovers for my sedan ES civic 2004 and I think I will go for that one. However, do I need to get the Lower control arm and the lower sub or the stock ones should be fine ?
@crxseth3 жыл бұрын
I’m not familiar with that chassis.
@luisdejesusluna92612 жыл бұрын
Thank you 😊
@jaievang86723 жыл бұрын
...also, GREAT camera work! Is that you as well? Where do you have the time? Perfection.
@crxseth3 жыл бұрын
Thanks! Yes, it definitely takes a ton of time doing it yourself!
@wolfparty42343 жыл бұрын
Now the left side is lower then the right side!🤣 Wish y’all would of did some painting on the shock forks. Nbd
@crxseth3 жыл бұрын
It gets repetitive after a while! Haha. Gotta cut some things out. This was just a quick temporary installation. His long term plan is to find a better shell.
@AWD_T3 жыл бұрын
Those bolts for the rear lca ALWAYS break.
@lsminibikes2 жыл бұрын
Dude. I just broke mine literally after watching this video. Can I get a replacement local anywhere ? Or would I have to order it online?
@nicklam62492 жыл бұрын
love your video, just wondering what size were those bolts and nuts for the LCA. thanks in advanced.
@crxseth2 жыл бұрын
amzn.to/3zjd3kN
@embee19732 жыл бұрын
Clean.
@johnnyjohnathon7381 Жыл бұрын
I had to use those sleeves for the fork on my eg civic
@shineclinic43492 жыл бұрын
Was having a hard time with that fork bolt had to shave some of the adapter off to make a slight groove. Also rear lower control arm needed a bolt for shock.
@crxseth2 жыл бұрын
Yeah, there are some quirks to work out. I guess when you get the budget stuff it requires some more work.
@dawhitecastle Жыл бұрын
Having this issue on the front too. Pain in the ass. Haven’t got to the back yet.
@RussianTv8762 жыл бұрын
i install my coilover sleeve but im getting a very bumpy ride on rough road that i dont like can some one tell me how can i fix it
@chloespencer40113 жыл бұрын
I ordered these exact ones off eBay and they didn’t come with that thing you slide onto the fork and now they don’t fit. Any ideas where I can get them or anything else I could use?
@jasonvincent6903 жыл бұрын
Nice Ek! Not so nice bolts though. Glad we don’t see that stuff in AZ.
@thairicaan3 жыл бұрын
🔥🔥🔥
@mexkicks3 жыл бұрын
Damn I haven’t seen someone use a corded impact gun on KZbin ever😂😂😂
@crxseth3 жыл бұрын
🤣
@nitrous07me3 жыл бұрын
Should’ve greased them pillow ball mounts on the fronts before installing them
@gordoneversley68813 жыл бұрын
Meticulous again Seth! However I expected you to clean and paint everything in the wheel wells. Soo true about the corrosion and never thought about the spray. The thing is ... if you don't know you won't do it and if your mechanic is doing the work he may not care as it's to get it done quick and to move onto the next job, it makes no difference to them.
@crxseth3 жыл бұрын
This was just a quick suspension install on a chassis that he might be replacing soon due to having over half a million miles! We didn’t want to invest too much time into it. :)
@alexandrealex49722 жыл бұрын
very good 😍😍😍
@suggonboffa Жыл бұрын
did you even block the wheels when you jacked up the back of that ek?
@T12i99iN3 жыл бұрын
I was never a fan of slammed to ground on my own cars. I like looking at other people’s slammed to the ground cars...lol
@Trytec96Ай бұрын
Did you notice there being a large gap with where the bottom of the rear shock and lower control arm meets? Im referring to when you install the bolt. If I go any tighter, the metal legs on the shock are going to start bending inwards.
@crxsethАй бұрын
You may need spacers. The kit comes with these spacers.
@Trytec96Ай бұрын
@crxseth 30 seconds after I asked I saw a video and was like aaaaaah that's what those washers were for. Definitely a blonde moment
@tigris4149a23 жыл бұрын
you can never use a bar on the rear trailing arm bolts. always breaks lol.
@lsminibikes2 жыл бұрын
Just broke my LCA bolt too right after watching this video. Did you find replacement bolt locally ?? Please let me know
@crxseth2 жыл бұрын
No, we had to order some online.
@bikelifeel21872 жыл бұрын
Bru I just bought some with out the sleeve know if I can get them any how
@dawhitecastle Жыл бұрын
I got the updated of these for my 96 hatch and the adaptors for the front don’t fit on the control arm. Had to sand them down inside the ring which was a bitch.
@CakeBoSS559ANDY3 жыл бұрын
Hey make sure to look at the coilover a couple thousand miles after the install I ordered a set and the damper itself was leaking right out the box. Customer service tried sending me a damper itself so I could fix it. Had to bed them to replace the entire coilover and was charged a total of $50 extra for the shipping for them to send me a full coilover replacement. Been a week and a half since I got the package still waiting on the coil. Buddy came into the shop yesterday for an alignment he has an s14 kouiki said he just ínstalled his set and one of his rear coilsare already leaking the same oil that came in my set. My set was for a 98 civic coupe.
@crxseth3 жыл бұрын
I’ll definitely let him know!
@CCDVIDEO3 жыл бұрын
Hows the ride on these maxpeeding coilovers? Also, I see there’s gold, red & silver, is there a difference to them, other than the colour, as I see there’s a price difference too. Your feedback will be appreciate man
@crxseth3 жыл бұрын
They have adjustable dampening ones and non adjustable dampening ones. The colors are just colors. These actually almost ride like factory. Much softer than other coilovers but not bad, in my opinion. I have them set to full stiff.
@CCDVIDEO3 жыл бұрын
@@crxseth thanx for getting back to me, I appreciate the feedback. Sounds like they are worth the money you pay for them 👌🏻 I’m from South Africa, will def get them ordered up for my EK Civic 🤘🏻
@oscara57832 жыл бұрын
All the other things are those needed or more recommended? Beside the set of coils
@crxseth2 жыл бұрын
Probably a set of camber adjustment arms for the rear and possibly front camber adjustment arms.
@jhonnelelegaspi7125 Жыл бұрын
Did you use a new set of bolts for coilovers and subframe?
@crxseth Жыл бұрын
A couple of them were new because of having to cut them to remove them.
@kenjivue69519 ай бұрын
did the rear suspension components come with hardware?
@crxseth9 ай бұрын
No.
@Dociletapeworm Жыл бұрын
Do I need the sleeves on the front coilovers for my 2000 ej6 sedan? Also what are the washers for that come with the coil overs? Thanks.
@crxseth Жыл бұрын
Yes for the sleeves. Washers are for rear control arms for certain cars.
@Dociletapeworm Жыл бұрын
@@crxseth thanks. I got mine installed. I had to sand the paint off the front coilovers to get them to slide into the sleeve and I had to use the washers on the rear. But the caris sitting nice and rides nice.
@josuemendoza96742 жыл бұрын
How exactly did you take the bolts out?
@crxseth2 жыл бұрын
What bolts?
@party13552 жыл бұрын
@11:25 Do you need all these when installing coilovers
@crxseth2 жыл бұрын
No, not 100% necessary.
@PipoRacing717 Жыл бұрын
🔥🔥🔥💪🏽💪🏽💪🏽🇵🇷🇵🇷❤️
@samfoote96303 жыл бұрын
Yo where's his sway bar for the rear? Its missing it completely 😧
@crxseth3 жыл бұрын
It definitely needs one!
@nathanmassey5027 Жыл бұрын
Life's to short to keep your car stock
@brad.tripleog_jamaica3848 ай бұрын
Hey Those the coilovers already comes pre load?
@oneday38575 ай бұрын
Yeah
@beethao55783 жыл бұрын
Preload suppension time
@joseluyando98652 жыл бұрын
Did you add camber kit?
@crxseth2 жыл бұрын
No. I may need to, though, if the camber is too far off. Might just space out the OE camber arm some.
@johnramos97965 ай бұрын
Anyone have fitment measurements?
@civic23233 жыл бұрын
What rims are on the silver crx
@crxseth3 жыл бұрын
Konig Helium
@alexandrealex49722 жыл бұрын
🎬🎞📸📽🎶😍😁👍
@diegos_ej8362 Жыл бұрын
How many inches u lower all around
@crxseth Жыл бұрын
We didn’t measure. Just went by sight.
@evolee89497 ай бұрын
How are those maxspeedrod holding up?
@crxseth7 ай бұрын
Honestly, I sold this car a couple years ago so I’m not sure.
@gmontenegro97112 жыл бұрын
Any update on this kit? Any leaks??
@crxseth2 жыл бұрын
A bit softer than other coilovers, but comfortable and no leaks yet.
@realitycheck36723 жыл бұрын
My EF is so low I had to flip the lower tie bar upside down for ground clearance 😂
@crxseth3 жыл бұрын
I told Dustin he better be careful or he might snag on something!
@realitycheck36723 жыл бұрын
@@crxseth absolutely. If you need any OEM discontinued parts from Japan use this site. I’ve ordered tons of stuff for my 91 EF. www.amayama.com/en/catalogs/honda/civic/4-sedan-right-ef-ej-1989-r-212
@gordoneversley68813 жыл бұрын
@@realitycheck3672 yes I use them as well. Good form stuff but it took a while to get it not sure if it was due to the pandemic. I eventually got what I needed.
@realitycheck36723 жыл бұрын
@@gordoneversley6881 yeah it’s because of the PlanDemic. They were offering lower shipping options but because of the PlanDemic you have to pay for expedited shipping which is unreasonably high so it’s better to buy as many items at once. Cheers. 🇨🇦
@tonyekthree3 жыл бұрын
Needs a sir lip...
@crxseth3 жыл бұрын
It’s actually on the way!
@tonymonthana0093 жыл бұрын
Great!!! Thx for replaying I'm a subscriber from deadbeat garage superb job on the gray crx, ciao from Italy...
@KeepinItReal8902 жыл бұрын
I just broke those exact bolts out bro. like 3 days ago... I haven't even gone back into the garage because I'm still pissed off. how in the fuck did you get those out
@crxseth2 жыл бұрын
This car is super clean underneath. No rust or corrosion. I would recommend this tool for future use. It’s a lifesaver. amzn.to/3ut7jFY
@jhonnelelegaspi7125 Жыл бұрын
I had same experience! I broke the free bolt inside the welded nut on the car. Now I have to replace all bolts took me a week to reinstall
@isaacjones39783 жыл бұрын
Need to get a new set of coilovers ive seen few other KZbiners use max speeding rod my question is in ride quality in a daily driver
@JesusOrtiz-qp1so Жыл бұрын
By far the 1998 Silver Civic is the best looking car you have not so much the other 2 plus hatch is not that popular
@jonathan2fast4u3 жыл бұрын
In this Last time maxspeed sponsored a lot of crx KZbinr why??? Also in Italy they arrived with this low cost product....
@crxseth3 жыл бұрын
They are really pushing their products via KZbin.
@jonathan2fast4u3 жыл бұрын
@@crxseth but what do u think about It? Reply with true or not reply ;)
@dannyr33463 жыл бұрын
Pays retail for coilovers then shouts out the company. Is this the new trend??
@MrPlasto12113 жыл бұрын
I doubt he paid for these this company has been sponsoring every small honda based utuber
@crxseth3 жыл бұрын
MrPlasto1211 is correct.
@bagofsoup8199 Жыл бұрын
People hate on these coils but wtf do I look like putting $2500 coils on a $3000 civic this is budget builds
@yusufziyayldrm8933 жыл бұрын
please black crx rims cod give me
@nathanmassey5027 Жыл бұрын
Mod yo shit
@jayleneason15973 жыл бұрын
My sleave will not go into the fork!! Highly irritated waste of money
@megaruhe62963 жыл бұрын
Wouldn't that be an EJ?
@crxseth3 жыл бұрын
Technically, yes. Most people generically call them EK most of the time.
@jhonviel73812 жыл бұрын
should of just went with the expensive coilovers. these cheap chinese ones barely meet oem, lucky us consumers/drivers of econoshitboxes dont care! ha
@cesarsanchez75013 жыл бұрын
Dump it some more.
@crxseth3 жыл бұрын
We debated that, but decided to keep it as drivable as possible, as he will be adding a front lip to it as well.
@ImpalaSS082 ай бұрын
Such an ugly car. Glad this wasn’t my era. Clean example though. Good for him.
@ParmoHunters2 жыл бұрын
I highly recommend grabbing a set of coilover covers from CoiloverCovers.com These are their covers here: kzbin.info/www/bejne/sGateJ9-ar2cn68